A:调整部分日志；增加Client对于依赖注入的支持

src/Sharp/Client/App.xaml

@@ -10,3 +10,7 @@
         </ResourceDictionary>
     </Application.Resources>
 </Application>
+
+
+
+

src/Sharp/Client/App.xaml.cs

@@ -2,7 +2,9 @@ using System;
 using System.Windows;
 using Client.Services;
 using Client.ViewModels;
+using Microsoft.Extensions.Configuration;
 using Microsoft.Extensions.DependencyInjection;
+using Microsoft.Extensions.DependencyInjection.Extensions;
 using Microsoft.Extensions.Logging;
 using Common;
 using Config;
@@ -10,10 +12,8 @@ using NetClient.DependencyInjection;
 using Sharp.Infrastructure.Configuration;
 using Sharp.Log.Extensions;
 using Sharp.NetServer.DependencyInjection;
+using Sharp.Wpf.Exceptions;
 using Sharp.Wpf.Services;
-using Sharp.Wpf.Abstractions;
-using Plc.Siemens.DependencyInjection;
-using Microsoft.Extensions.Configuration;
 
 namespace Client
 {
@@ -27,58 +27,7 @@ namespace Client
         protected override void OnStartup(StartupEventArgs e)
         {
             base.OnStartup(e);
-
-            // Global Exception Handling
-            DispatcherUnhandledException += (s, args) =>
-            {
-                // Safe logging: handle case where DI failed
-                if (_serviceProvider != null)
-                {
-                    try
-                    {
-                        var logger = _serviceProvider.GetService<ILogger<App>>();
-                        logger?.LogError(args.Exception, "UI Thread Unhandled Exception");
-                    }
-                    catch { /* Ignore logging failure during crash */ }
-                }
-                
-                MessageBox.Show($"发生未处理异常: {args.Exception.Message}", "错误", MessageBoxButton.OK, MessageBoxImage.Error);
-                args.Handled = true; // Prevent crash
-            };
-
-            TaskScheduler.UnobservedTaskException += (s, args) =>
-            {
-                if (_serviceProvider != null)
-                {
-                    try
-                    {
-                        var logger = _serviceProvider.GetService<ILogger<App>>();
-                        logger?.LogError(args.Exception, "Task Unobserved Exception");
-                    }
-                    catch { /* Ignore */ }
-                }
-                args.SetObserved();
-            };
-
-            AppDomain.CurrentDomain.UnhandledException += (s, args) =>
-            {
-                var ex = args.ExceptionObject as Exception;
-                if (_serviceProvider != null)
-                {
-                    try
-                    {
-                        var logger = _serviceProvider.GetService<ILogger<App>>();
-                        logger?.LogCritical(ex, "AppDomain Unhandled Exception (IsTerminating: {IsTerminating})", args.IsTerminating);
-                    }
-                    catch { /* Ignore */ }
-                }
-
-                if (args.IsTerminating)
-                {
-                    MessageBox.Show($"发生严重错误，程序即将退出: {ex?.Message}", "严重错误", MessageBoxButton.OK, MessageBoxImage.Error);
-                }
-            };
-
+            
             // 1) Build configuration manager from appsettings.json (+ reload on change + env vars)
             var cm = ConfigBuilder.BuildFromFiles(new[] { "appsettings.json" }, reloadOnChange: true, includeEnvironment: true, basePath: AppContext.BaseDirectory);
 
@@ -87,8 +36,7 @@ namespace Client
 
             // ConfigManager and typed SystemConfig accessor
             services.AddSingleton(cm);
-            // Register standard IConfiguration so that .BindConfiguration() works
-            services.AddSingleton<IConfiguration>(cm.Configuration); 
+            services.TryAddSingleton<IConfiguration>(cm.Configuration); // Register IConfiguration for BindConfiguration
             services.AddSystemConfig(cm);
 
             // Logging (binds from section "SharpLog")
@@ -98,53 +46,47 @@ namespace Client
             services.AddNetClient(cm);
             services.AddNetServer(cm);
 
-            // PLC
-            services.AddSiemensPlc(options =>
-            {
-                options.IpAddress = "127.0.0.1";
-                options.CpuType = S7.Net.CpuType.S71200;
-            });
+            // WPF exception handler
+            services.AddSingleton<IUiExceptionHandler, UiExceptionHandler>();
 
             // WPF app services
             services.AddSingleton<IDialogService, DialogService>();
             services.AddSingleton<IAuthenticationService, DemoAuthenticationService>();
             services.AddSingleton<IUserSession, UserSession>();
-            // Register DispatcherService with the current UI dispatcher
-            services.AddSingleton<IDispatcher>(new DispatcherService(Dispatcher));
 
             services.AddTransient<LoginViewModel>();
             services.AddTransient<MainViewModel>();
-            services.AddTransient<PlcViewModel>();
-
             services.AddTransient<LoginWindow>();
             services.AddTransient<MainWindow>();
-            services.AddTransient<PlcWindow>();
 
             _serviceProvider = services.BuildServiceProvider();
 
-            // 3) Register global facades for convenience
-            Global.RegisterSingleton<IServiceProvider>(_serviceProvider);
+            // 3) Activate global WPF exception handler
+            var exceptionHandler = _serviceProvider.GetRequiredService<IUiExceptionHandler>();
+            exceptionHandler.Register();
+
+            // 4) Register global facades for convenience
+            Global.RegisterSingleton(_serviceProvider);
             Global.RegisterSingleton(cm);
             Global.RegisterSingleton(_serviceProvider.GetRequiredService<ISystemConfigAccessor>());
-            // Also register IDispatcher in Global if it's needed by static contexts (though injection is preferred)
-            Global.RegisterSingleton(_serviceProvider.GetRequiredService<IDispatcher>());
 
-            // 4) Show login window first, then main shell if authenticated
-            // Explicitly set ShutdownMode to prevent app from closing when LoginWindow closes
-            ShutdownMode = ShutdownMode.OnExplicitShutdown;
-            
+            // 5) Show login window first, then main shell if authenticated
+            var logger = _serviceProvider.GetRequiredService<ILogger<App>>();
+            logger.LogInformation("Showing login window");
             var loginWindow = _serviceProvider.GetRequiredService<LoginWindow>();
             var loginResult = loginWindow.ShowDialog();
 
+            logger.LogInformation("Login window closed with result: {LoginResult}", loginResult);
+
             if (loginResult == true)
             {
+                logger.LogInformation("Login successful, showing main window");
                 var main = _serviceProvider.GetRequiredService<MainWindow>();
-                Current.MainWindow = main;
-                ShutdownMode = ShutdownMode.OnMainWindowClose;
                 main.Show();
             }
             else
             {
+                logger.LogInformation("Login cancelled or failed, shutting down application");
                 Shutdown();
             }
         }
@@ -155,4 +97,4 @@ namespace Client
             base.OnExit(e);
         }
     }
-}
+}

src/Sharp/Client/Client.csproj

@@ -21,7 +21,6 @@
     <ProjectReference Include="..\NetServer\NetServer.csproj" />
     <ProjectReference Include="..\Log\Log.csproj" />
     <ProjectReference Include="..\Sharp.Infrastructure\Sharp.Infrastructure.csproj" />
-    <ProjectReference Include="..\Plc.Siemens\Plc.Siemens.csproj" />
   </ItemGroup>
 
 </Project>

src/Sharp/Client/Hardware/IPackMachine.cs

@@ -1,18 +0,0 @@
-using System.ComponentModel;
-using Plc.Attributes;
-
-namespace Client.Hardware;
-
-// 必须继承 INotifyPropertyChanged 才能支持自动 UI 刷新
-public interface IPackMachine : INotifyPropertyChanged
-{
-    [PlcAddress("DB1.DBW0")]
-    short RunningSpeed { get; set; }
-
-    [PlcAddress("DB1.DBW2")]
-    short Temperature { get; set; }
-
-    // 支持 bool (比如 M 区)
-    [PlcAddress("M100.0")]
-    bool IsStartButtonPushed { get; set; }
-}

src/Sharp/Client/LoginWindow.xaml.cs

@@ -1,23 +1,27 @@
 using System;
 using HandyControl.Controls;
 using Client.ViewModels;
+using Microsoft.Extensions.Logging;
 
 namespace Client;
 
 public partial class LoginWindow : GlowWindow
 {
     private readonly LoginViewModel _viewModel;
+    private readonly ILogger<LoginWindow>? _logger;
 
-    public LoginWindow(LoginViewModel viewModel)
+    public LoginWindow(LoginViewModel viewModel, ILogger<LoginWindow>? logger = null)
     {
         InitializeComponent();
         _viewModel = viewModel;
+        _logger = logger;
         DataContext = viewModel;
         _viewModel.LoginSucceeded += HandleLoginSucceeded;
     }
 
     private void HandleLoginSucceeded(object? sender, EventArgs e)
     {
+        _logger?.LogInformation("HandleLoginSucceeded called, setting DialogResult = true");
         DialogResult = true;
     }
 

src/Sharp/Client/MainWindow.xaml

@@ -47,12 +47,7 @@
                                 Command="{Binding ShowDialogCommand}" />
                         <Button Content="触发异常"
                                 Padding="18,6"
-                                Margin="0,0,12,0"
                                 Command="{Binding ThrowCommand}" />
-                        <Button Content="PLC 调试"
-                                Padding="18,6"
-                                Style="{StaticResource ButtonPrimary}"
-                                Command="{Binding OpenPlcToolCommand}" />
                     </StackPanel>
                 </Grid>
             </Border>
@@ -87,45 +82,6 @@
                             <TextBlock Text="{Binding Greeting}" Margin="0,8,0,0" TextWrapping="Wrap" />
                         </StackPanel>
                     </Border>
-                    <Border Background="{DynamicResource PopupBrush}" Margin="0,0,16,16" Padding="20" CornerRadius="12">
-                        <StackPanel>
-                            <TextBlock Text="包装机状态 (PLC)" FontWeight="SemiBold" />
-                            <StackPanel Orientation="Horizontal" Margin="0,8,0,0">
-                                <TextBlock Text="速度: " Foreground="{DynamicResource SecondaryTextBrush}"/>
-                                <TextBlock Text="{Binding Machine.RunningSpeed}" FontWeight="Bold" />
-                                <TextBlock Text=" rpm" Foreground="{DynamicResource SecondaryTextBrush}"/>
-                            </StackPanel>
-                            <StackPanel Orientation="Horizontal" Margin="0,4,0,0">
-                                <TextBlock Text="温度: " Foreground="{DynamicResource SecondaryTextBrush}"/>
-                                <TextBlock Text="{Binding Machine.Temperature}" FontWeight="Bold" />
-                                <TextBlock Text=" ℃" Foreground="{DynamicResource SecondaryTextBrush}"/>
-                            </StackPanel>
-                            
-                            <!-- 交互控制演示 -->
-                            <Separator Margin="0,10" Background="{DynamicResource BorderBrush}"/>
-                            <TextBlock Text="控制面板" FontWeight="SemiBold" Margin="0,0,0,5"/>
-                            
-                            <Grid>
-                                <Grid.ColumnDefinitions>
-                                    <ColumnDefinition Width="Auto"/>
-                                    <ColumnDefinition Width="*"/>
-                                    <ColumnDefinition Width="Auto"/>
-                                </Grid.ColumnDefinitions>
-                                <TextBlock Text="设定速度:" VerticalAlignment="Center"/>
-                                <Slider Grid.Column="1" Minimum="0" Maximum="2000" Value="{Binding Machine.RunningSpeed}" Margin="10,0" IsMoveToPointEnabled="True"/>
-                                <TextBlock Grid.Column="2" Text="{Binding Machine.RunningSpeed}" Width="40" TextAlignment="Right"/>
-                            </Grid>
-
-                            <StackPanel Orientation="Horizontal" Margin="0,10,0,0">
-                                <Button Content="启动机器" Command="{Binding StartMachineCommand}" Margin="0,0,10,0" Style="{StaticResource ButtonSuccess}"/>
-                                <Button Content="停止机器" Command="{Binding StopMachineCommand}" Style="{StaticResource ButtonDanger}"/>
-                            </StackPanel>
-                            
-                            <StackPanel Orientation="Horizontal" Margin="0,10,0,0">
-                                <CheckBox IsChecked="{Binding Machine.IsStartButtonPushed}" Content="启动按钮状态 (双向绑定)" IsHitTestVisible="False"/>
-                            </StackPanel>
-                        </StackPanel>
-                    </Border>
                     <Border Background="{DynamicResource PopupBrush}" Margin="0,0,16,16" Padding="20" CornerRadius="12">
                         <StackPanel>
                             <TextBlock Text="提示" FontWeight="SemiBold" />

src/Sharp/Client/PlcWindow.xaml

@@ -1,90 +0,0 @@
-<hc:GlowWindow x:Class="Client.PlcWindow"
-        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-        xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
-        xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
-        xmlns:hc="https://handyorg.github.io/handycontrol"
-        xmlns:conv="clr-namespace:Sharp.Wpf.Converters;assembly=Sharp.Wpf"
-        mc:Ignorable="d"
-        Title="PLC 调试工具" Height="500" Width="800"
-        WindowStartupLocation="CenterOwner">
-    <hc:GlowWindow.Resources>
-        <conv:BoolToVisibilityConverter x:Key="Bool2Vis" />
-    </hc:GlowWindow.Resources>
-    
-    <Grid Margin="20">
-        <Grid.RowDefinitions>
-            <RowDefinition Height="Auto"/>
-            <RowDefinition Height="Auto"/>
-            <RowDefinition Height="Auto"/>
-            <RowDefinition Height="*"/>
-        </Grid.RowDefinitions>
-
-        <!-- 连接控制 -->
-        <Border Background="{DynamicResource RegionBrush}" Padding="15" CornerRadius="8" Margin="0,0,0,15">
-            <StackPanel>
-                <StackPanel Orientation="Horizontal" Margin="0,0,0,10">
-                    <TextBlock Text="品牌:" VerticalAlignment="Center" Margin="0,0,5,0"/>
-                    <ComboBox ItemsSource="{Binding Brands}" SelectedItem="{Binding SelectedBrand}" Width="120" Margin="0,0,15,0"/>
-                    
-                    <StackPanel Orientation="Horizontal" Visibility="{Binding IsSiemensOptionsVisible, Converter={StaticResource Bool2Vis}}">
-                        <TextBlock Text="型号:" VerticalAlignment="Center" Margin="0,0,5,0"/>
-                        <ComboBox ItemsSource="{Binding CpuTypes}" SelectedItem="{Binding SelectedCpuType}" Width="120" Margin="0,0,15,0"/>
-                    </StackPanel>
-                </StackPanel>
-                
-                <StackPanel Orientation="Horizontal">
-                    <TextBox hc:InfoElement.Placeholder="IP 地址" hc:InfoElement.Title="IP" Text="{Binding IpAddress}" Width="200" Margin="0,0,10,0"/>
-                    <Button Content="连接 / 启动服务" Command="{Binding ConnectCommand}" Margin="0,0,10,0" Style="{StaticResource ButtonPrimary}"/>
-                    <Button Content="断开" Command="{Binding DisconnectCommand}"/>
-                    <TextBlock Text="{Binding Status}" VerticalAlignment="Center" Margin="20,0,0,0" FontWeight="Bold" Foreground="{DynamicResource PrimaryTextBrush}"/>
-                </StackPanel>
-            </StackPanel>
-        </Border>
-
-        <!-- 单次读写 -->
-        <GroupBox Header="单次读写测试 (默认 Short)" Grid.Row="1" Margin="0,0,0,15">
-            <Grid Margin="10">
-                <Grid.RowDefinitions>
-                    <RowDefinition Height="Auto"/>
-                    <RowDefinition Height="Auto"/>
-                </Grid.RowDefinitions>
-                <Grid.ColumnDefinitions>
-                    <ColumnDefinition Width="Auto"/>
-                    <ColumnDefinition Width="*"/>
-                    <ColumnDefinition Width="Auto"/>
-                    <ColumnDefinition Width="*"/>
-                    <ColumnDefinition Width="Auto"/>
-                </Grid.ColumnDefinitions>
-
-                <TextBlock Text="读取地址:" VerticalAlignment="Center"/>
-                <TextBox Grid.Column="1" Text="{Binding ReadAddress}" Margin="5,0"/>
-                <Button Grid.Column="2" Content="读取" Command="{Binding ReadCommand}" Margin="5,0"/>
-                <TextBlock Grid.Column="3" Text="{Binding ReadValue}" VerticalAlignment="Center" Margin="5,0" FontWeight="Bold"/>
-
-                <TextBlock Grid.Row="1" Text="写入地址:" VerticalAlignment="Center" Margin="0,10,0,0"/>
-                <TextBox Grid.Row="1" Grid.Column="1" Text="{Binding WriteAddress}" Margin="5,10,0,0"/>
-                <TextBox Grid.Row="1" Grid.Column="3" Text="{Binding WriteValue}" Margin="5,10,0,0"/>
-                <Button Grid.Row="1" Grid.Column="4" Content="写入" Command="{Binding WriteCommand}" Margin="5,10,0,0"/>
-            </Grid>
-        </GroupBox>
-
-        <!-- 监控 -->
-        <GroupBox Header="实时监控 (Add Watch)" Grid.Row="2" Margin="0,0,0,15">
-            <StackPanel Orientation="Horizontal" Margin="10">
-                <TextBox hc:InfoElement.Placeholder="地址 (如 DB1.DBW0)" Text="{Binding MonitorAddress}" Width="200" Margin="0,0,10,0"/>
-                <Button Content="添加监控" Command="{Binding AddMonitorCommand}"/>
-            </StackPanel>
-        </GroupBox>
-
-        <!-- 监控列表 -->
-        <DataGrid Grid.Row="3" ItemsSource="{Binding MonitoredTags}" AutoGenerateColumns="False" IsReadOnly="True" HeadersVisibility="Column">
-            <DataGrid.Columns>
-                <DataGridTextColumn Header="ID" Binding="{Binding Id}" Width="100"/>
-                <DataGridTextColumn Header="地址" Binding="{Binding Address}" Width="150"/>
-                <DataGridTextColumn Header="类型" Binding="{Binding DataType.Name}" Width="80"/>
-                <DataGridTextColumn Header="当前值" Binding="{Binding Value}" Width="*"/>
-            </DataGrid.Columns>
-        </DataGrid>
-    </Grid>
-</hc:GlowWindow>

src/Sharp/Client/PlcWindow.xaml.cs

@@ -1,14 +0,0 @@
-using System.Windows;
-using Client.ViewModels;
-using HandyControl.Controls;
-
-namespace Client;
-
-public partial class PlcWindow : GlowWindow
-{
-    public PlcWindow(PlcViewModel viewModel)
-    {
-        InitializeComponent();
-        DataContext = viewModel;
-    }
-}

src/Sharp/Client/ViewModels/LoginViewModel.cs

@@ -1,6 +1,7 @@
 using System;
 using System.Threading.Tasks;
 using Client.Services;
+using Microsoft.Extensions.Logging;
 using Sharp.Wpf.Commands;
 using Sharp.Wpf.Mvvm;
 
@@ -10,6 +11,7 @@ public sealed class LoginViewModel : ViewModelBase
 {
     private readonly IAuthenticationService _authenticationService;
     private readonly IUserSession _userSession;
+    private readonly ILogger<LoginViewModel> _logger;
     private readonly IAsyncCommand _loginCommand;
 
     private string _userName = "admin";
@@ -18,10 +20,11 @@ public sealed class LoginViewModel : ViewModelBase
 
     public event EventHandler? LoginSucceeded;
 
-    public LoginViewModel(IAuthenticationService authenticationService, IUserSession userSession)
+    public LoginViewModel(IAuthenticationService authenticationService, IUserSession userSession, ILogger<LoginViewModel> logger)
     {
         _authenticationService = authenticationService;
         _userSession = userSession;
+        _logger = logger;
         _loginCommand = new AsyncCommand(LoginAsync);
     }
 
@@ -67,6 +70,7 @@ public sealed class LoginViewModel : ViewModelBase
     {
         try
         {
+            _logger.LogInformation("Login attempt for user: {UserName}", UserName);
             IsBusy = true;
             ErrorMessage = null;
 
@@ -74,13 +78,21 @@ public sealed class LoginViewModel : ViewModelBase
 
             if (!result.Succeeded)
             {
+                _logger.LogWarning("Login failed for user: {UserName}, Error: {Error}", UserName, result.Error);
                 ErrorMessage = result.Error;
                 return;
             }
 
+            _logger.LogInformation("Login succeeded for user: {UserName}", UserName);
             _userSession.SignIn(UserName, result.DisplayName);
+            _logger.LogInformation("Invoking LoginSucceeded event");
             LoginSucceeded?.Invoke(this, EventArgs.Empty);
         }
+        catch (Exception ex)
+        {
+            _logger.LogError(ex, "Login failed for user: {UserName}", UserName);
+            ErrorMessage = "An unexpected error occurred.";
+        }
         finally
         {
             IsBusy = false;

src/Sharp/Client/ViewModels/MainViewModel.cs

@@ -5,14 +5,6 @@ using Client.Services;
 using Sharp.Wpf.Commands;
 using Sharp.Wpf.Mvvm;
 using Sharp.Wpf.Services;
-using Microsoft.Extensions.DependencyInjection;
-using Common;
-using Client.Hardware;
-using Plc.Proxy;
-using Plc.Abstractions;
-using System.ComponentModel;
-
-using Sharp.Wpf.Abstractions;
 
 namespace Client.ViewModels;
 
@@ -20,64 +12,23 @@ public sealed class MainViewModel : ViewModelBase
 {
     private readonly IDialogService _dialogService;
     private readonly IUserSession _userSession;
-    private readonly IDispatcher _dispatcher;
 
     private string _greeting = "欢迎使用 Sharp";
     private string _statusMessage = "系统就绪";
     private DateTime _lastSyncTime = DateTime.Now;
 
-    // 魔法设备对象：直接绑定到界面，无需手动写 Read/Write/Subscribe
-    public IPackMachine Machine { get; }
-
-    public MainViewModel(IDialogService dialogService, IUserSession userSession, IDispatcher dispatcher)
+    public MainViewModel(IDialogService dialogService, IUserSession userSession)
     {
         _dialogService = dialogService;
         _userSession = userSession;
-        _dispatcher = dispatcher;
         _greeting = $"欢迎回来，{UserDisplayName}";
         _statusMessage = "准备就绪";
 
         ShowDialogCommand = new AsyncCommand(ShowDialogAsync);
         RefreshDashboardCommand = new AsyncCommand(RefreshDashboardAsync);
         ThrowCommand = new RelayCommand(() => throw new InvalidOperationException("演示：未处理异常将被全局处理"));
-        
-        OpenPlcToolCommand = new RelayCommand(() => 
-        {
-            var sp = Global.Get<IServiceProvider>();
-            var win = sp.GetRequiredService<PlcWindow>();
-            win.Show();
-        });
-
-        // 1. 获取 PLC 服务
-        var plcService = Global.Get<IServiceProvider>().GetRequiredService<IPlcService>();
-        
-        // 2. 创建代理
-        Machine = PlcInterfaceProxy.Create<IPackMachine>(plcService);
-
-        // 3. 代码监听演示：监听属性变化
-        Machine.PropertyChanged += OnMachinePropertyChanged;
-
-        // 4. 控制命令
-        StartMachineCommand = new RelayCommand(() => Machine.IsStartButtonPushed = true);
-        StopMachineCommand = new RelayCommand(() => Machine.IsStartButtonPushed = false);
     }
 
-    private void OnMachinePropertyChanged(object? sender, PropertyChangedEventArgs e)
-    {
-        // 演示：当速度变化时，在日志或状态栏显示
-        if (e.PropertyName == nameof(IPackMachine.RunningSpeed))
-        {
-            _dispatcher.InvokeAsync(() => 
-            {
-                if (Machine.RunningSpeed > 1000)
-                {
-                    StatusMessage = $"警告：速度过高 ({Machine.RunningSpeed})";
-                }
-            });
-        }
-    }
-//...
-
     public string UserDisplayName => _userSession.DisplayName ?? _userSession.UserName ?? "访客";
 
     public string Greeting
@@ -101,9 +52,6 @@ public sealed class MainViewModel : ViewModelBase
     public IAsyncCommand ShowDialogCommand { get; }
     public IAsyncCommand RefreshDashboardCommand { get; }
     public ICommand ThrowCommand { get; }
-    public ICommand OpenPlcToolCommand { get; }
-    public ICommand StartMachineCommand { get; }
-    public ICommand StopMachineCommand { get; }
 
     private async Task ShowDialogAsync()
     {
@@ -135,4 +83,4 @@ public sealed class MainViewModel : ViewModelBase
             IsBusy = false;
         }
     }
-}
+}

src/Sharp/Client/ViewModels/PlcViewModel.cs

@@ -1,212 +0,0 @@
-using System.Collections.ObjectModel;
-using System.Windows.Input;
-using Sharp.Wpf.Mvvm;
-using Sharp.Wpf.Commands;
-using Plc.Abstractions;
-using Plc.Models;
-using Plc.Siemens.Options;
-using S7.Net;
-using System.Windows;
-
-namespace Client.ViewModels;
-
-public class PlcViewModel : ViewModelBase
-{
-    private readonly IPlcService _plcService;
-    private readonly SiemensPlcOptions _siemensOptions;
-
-    // 连接配置
-    private PlcBrand _selectedBrand = PlcBrand.Siemens;
-    private CpuType _selectedCpuType = CpuType.S71200;
-    private string _ipAddress = "127.0.0.1";
-    private string _status = "未连接";
-
-    // 读写测试
-    private string _readAddress = "DB1.DBW0";
-    private string _readValue = "-";
-    private string _writeAddress = "DB1.DBW0";
-    private string _writeValue = "0";
-    
-    // 监控
-    private string _monitorAddress = "DB1.DBW0";
-
-    public PlcViewModel(IPlcService plcService, SiemensPlcOptions siemensOptions)
-    {
-        _plcService = plcService;
-        _siemensOptions = siemensOptions;
-        
-        // 初始化界面值为当前配置值
-        _ipAddress = _siemensOptions.IpAddress;
-        _selectedCpuType = _siemensOptions.CpuType;
-        
-        ConnectCommand = new AsyncCommand(ConnectAsync);
-        DisconnectCommand = new AsyncCommand(DisconnectAsync);
-        ReadCommand = new AsyncCommand(ReadAsync);
-        WriteCommand = new AsyncCommand(WriteAsync);
-        AddMonitorCommand = new RelayCommand(AddMonitor);
-    }
-
-    #region Properties
-
-    public PlcBrand SelectedBrand
-    {
-        get => _selectedBrand;
-        set
-        {
-            if (SetProperty(ref _selectedBrand, value))
-            {
-                OnPropertyChanged(nameof(IsSiemensOptionsVisible));
-            }
-        }
-    }
-
-    public CpuType SelectedCpuType
-    {
-        get => _selectedCpuType;
-        set => SetProperty(ref _selectedCpuType, value);
-    }
-    
-    public bool IsSiemensOptionsVisible => SelectedBrand == PlcBrand.Siemens;
-
-    public string IpAddress
-    {
-        get => _ipAddress;
-        set => SetProperty(ref _ipAddress, value);
-    }
-
-    public string Status
-    {
-        get => _status;
-        set => SetProperty(ref _status, value);
-    }
-
-    public string ReadAddress
-    {
-        get => _readAddress;
-        set => SetProperty(ref _readAddress, value);
-    }
-
-    public string ReadValue
-    {
-        get => _readValue;
-        set => SetProperty(ref _readValue, value);
-    }
-
-    public string WriteAddress
-    {
-        get => _writeAddress;
-        set => SetProperty(ref _writeAddress, value);
-    }
-
-    public string WriteValue
-    {
-        get => _writeValue;
-        set => SetProperty(ref _writeValue, value);
-    }
-
-    public string MonitorAddress
-    {
-        get => _monitorAddress;
-        set => SetProperty(ref _monitorAddress, value);
-    }
-    
-    // 数据源
-    public ObservableCollection<PlcBrand> Brands { get; } = new(Enum.GetValues<PlcBrand>());
-    public ObservableCollection<CpuType> CpuTypes { get; } = new(Enum.GetValues<CpuType>());
-    public ObservableCollection<PlcTag> MonitoredTags { get; } = new();
-
-    #endregion
-
-    #region Commands
-
-    public IAsyncCommand ConnectCommand { get; }
-    public IAsyncCommand DisconnectCommand { get; }
-    public IAsyncCommand ReadCommand { get; }
-    public IAsyncCommand WriteCommand { get; }
-    public ICommand AddMonitorCommand { get; }
-
-    #endregion
-
-    private async Task ConnectAsync()
-    {
-        if (SelectedBrand != PlcBrand.Siemens)
-        {
-            Status = $"暂不支持 {SelectedBrand}，请等待后续更新";
-            return;
-        }
-
-        Status = "正在连接...";
-        try
-        {
-            // 1. 更新配置 (因为 SiemensDriver 注册为单例，且引用了 SiemensPlcOptions 单例)
-            // 修改这里的 Options 会直接影响 Driver 下一次 ConnectAsync 的行为
-            _siemensOptions.IpAddress = IpAddress;
-            _siemensOptions.CpuType = SelectedCpuType;
-            // 端口、机架号等暂时保持默认，也可以暴露在界面上
-
-            // 2. 启动服务 (内部会调用 Driver.ConnectAsync)
-            await _plcService.StartAsync();
-            Status = $"已连接 ({SelectedBrand} - {SelectedCpuType})";
-        }
-        catch (Exception ex)
-        {
-            Status = $"连接失败: {ex.Message}";
-        }
-    }
-
-    private async Task DisconnectAsync()
-    {
-        await _plcService.StopAsync();
-        Status = "已断开";
-    }
-
-    private async Task ReadAsync()
-    {
-        var result = await _plcService.ReadAsync<short>(ReadAddress);
-        if (result.IsSuccess)
-        {
-            ReadValue = result.Value.ToString();
-        }
-        else
-        {
-            ReadValue = $"Error: {result.ErrorMessage}";
-        }
-    }
-
-    private async Task WriteAsync()
-    {
-        if (short.TryParse(WriteValue, out var val))
-        {
-            var result = await _plcService.WriteAsync(WriteAddress, val);
-            if (result.IsFailure)
-            {
-                Status = $"写入失败: {result.ErrorMessage}";
-            }
-            else
-            {
-                Status = "写入成功";
-            }
-        }
-        else
-        {
-            Status = "输入值无效 (仅支持 short)";
-        }
-    }
-
-    private void AddMonitor()
-    {
-        var tag = new PlcTag
-        {
-            Address = MonitorAddress,
-            DataType = typeof(short),
-            OnChanged = (t, v) =>
-            {
-                // 注意：UI绑定更新需要在UI线程，这里简化处理，假设WPF做了同步或者是后台线程安全集合
-                t.Value = v; 
-            }
-        };
-        
-        _plcService.Subscribe(tag);
-        MonitoredTags.Add(tag);
-    }
-}

src/Sharp/Client/obj/Debug/net8.0-windows/App.g.cs

@@ -1,4 +1,4 @@
-#pragma checksum "..\..\..\App.xaml" "{ff1816ec-aa5e-4d10-87f7-6f4963833460}" "0048F04EA9C102506BBFAC3803E4711F700CF3ED"
+#pragma checksum "..\..\..\App.xaml" "{ff1816ec-aa5e-4d10-87f7-6f4963833460}" "A01D87CBC408FE1E9934F8938867D92F17E3A2CF"
 //------------------------------------------------------------------------------
 // <auto-generated>
 //     This code was generated by a tool.
@@ -46,7 +46,7 @@ namespace Client {
         /// InitializeComponent
         /// </summary>
         [System.Diagnostics.DebuggerNonUserCodeAttribute()]
-        [System.CodeDom.Compiler.GeneratedCodeAttribute("PresentationBuildTasks", "10.0.0.0")]
+        [System.CodeDom.Compiler.GeneratedCodeAttribute("PresentationBuildTasks", "9.0.4.0")]
         public void InitializeComponent() {
             if (_contentLoaded) {
                 return;
@@ -66,7 +66,7 @@ namespace Client {
         /// </summary>
         [System.STAThreadAttribute()]
         [System.Diagnostics.DebuggerNonUserCodeAttribute()]
-        [System.CodeDom.Compiler.GeneratedCodeAttribute("PresentationBuildTasks", "10.0.0.0")]
+        [System.CodeDom.Compiler.GeneratedCodeAttribute("PresentationBuildTasks", "9.0.4.0")]
         public static void Main() {
             Client.App app = new Client.App();
             app.InitializeComponent();

src/Sharp/Client/obj/Debug/net8.0-windows/Client.AssemblyInfo.cs

@@ -1,9 +1,10 @@
 //------------------------------------------------------------------------------
 // <auto-generated>
-//     This code was generated by a tool.
+//     此代码由工具生成。
+//     运行时版本:4.0.30319.42000
 //
-//     Changes to this file may cause incorrect behavior and will be lost if
-//     the code is regenerated.
+//     对此文件的更改可能会导致不正确的行为，并且如果
+//     重新生成代码，这些更改将会丢失。
 // </auto-generated>
 //------------------------------------------------------------------------------
 

src/Sharp/Client/obj/Debug/net8.0-windows/Client.GeneratedMSBuildEditorConfig.editorconfig

@@ -1,7 +1,5 @@
 is_global = true
 build_property.TargetFramework = net8.0-windows
-build_property.TargetFrameworkIdentifier = .NETCoreApp
-build_property.TargetFrameworkVersion = v8.0
 build_property.TargetPlatformMinVersion = 7.0
 build_property.UsingMicrosoftNETSdkWeb = 
 build_property.ProjectTypeGuids = 
@@ -10,7 +8,7 @@ build_property.PlatformNeutralAssembly =
 build_property.EnforceExtendedAnalyzerRules = 
 build_property._SupportedPlatformList = Linux,macOS,Windows
 build_property.RootNamespace = Client
-build_property.ProjectDir = D:\code\sharp-basic\src\Sharp\Client\
+build_property.ProjectDir = D:\yuanll\sharp-basic\src\Sharp\Client\
 build_property.EnableComHosting = 
 build_property.EnableGeneratedComInterfaceComImportInterop = 
 build_property.CsWinRTUseWindowsUIXamlProjections = false

src/Sharp/Client/obj/Debug/net8.0-windows/MainWindow.g.cs

@@ -0,0 +1,89 @@
+#pragma checksum "..\..\..\MainWindow.xaml" "{ff1816ec-aa5e-4d10-87f7-6f4963833460}" "9E813BA3492F961B4CE0E3DE4E78408D972934B6"
+//------------------------------------------------------------------------------
+// <auto-generated>
+//     This code was generated by a tool.
+//
+//     Changes to this file may cause incorrect behavior and will be lost if
+//     the code is regenerated.
+// </auto-generated>
+//------------------------------------------------------------------------------
+
+using HandyControl.Controls;
+using HandyControl.Data;
+using HandyControl.Expression.Media;
+using HandyControl.Expression.Shapes;
+using HandyControl.Interactivity;
+using HandyControl.Media.Animation;
+using HandyControl.Media.Effects;
+using HandyControl.Properties.Langs;
+using HandyControl.Themes;
+using HandyControl.Tools;
+using HandyControl.Tools.Converter;
+using HandyControl.Tools.Extension;
+using Sharp.Wpf.Converters;
+using Sharp.Wpf.Windowing;
+using System;
+using System.Diagnostics;
+using System.Windows;
+using System.Windows.Automation;
+using System.Windows.Controls;
+using System.Windows.Controls.Primitives;
+using System.Windows.Controls.Ribbon;
+using System.Windows.Data;
+using System.Windows.Documents;
+using System.Windows.Forms.Integration;
+using System.Windows.Ink;
+using System.Windows.Input;
+using System.Windows.Markup;
+using System.Windows.Media;
+using System.Windows.Media.Animation;
+using System.Windows.Media.Effects;
+using System.Windows.Media.Imaging;
+using System.Windows.Media.Media3D;
+using System.Windows.Media.TextFormatting;
+using System.Windows.Navigation;
+using System.Windows.Shapes;
+using System.Windows.Shell;
+
+
+namespace Client {
+    
+    
+    /// <summary>
+    /// MainWindow
+    /// </summary>
+    public partial class MainWindow : HandyControl.Controls.GlowWindow, System.Windows.Markup.IComponentConnector {
+        
+        private bool _contentLoaded;
+        
+        /// <summary>
+        /// InitializeComponent
+        /// </summary>
+        [System.Diagnostics.DebuggerNonUserCodeAttribute()]
+        [System.CodeDom.Compiler.GeneratedCodeAttribute("PresentationBuildTasks", "9.0.4.0")]
+        public void InitializeComponent() {
+            if (_contentLoaded) {
+                return;
+            }
+            _contentLoaded = true;
+            System.Uri resourceLocater = new System.Uri("/Client;component/mainwindow.xaml", System.UriKind.Relative);
+            
+            #line 1 "..\..\..\MainWindow.xaml"
+            System.Windows.Application.LoadComponent(this, resourceLocater);
+            
+            #line default
+            #line hidden
+        }
+        
+        [System.Diagnostics.DebuggerNonUserCodeAttribute()]
+        [System.CodeDom.Compiler.GeneratedCodeAttribute("PresentationBuildTasks", "9.0.4.0")]
+        [System.ComponentModel.EditorBrowsableAttribute(System.ComponentModel.EditorBrowsableState.Never)]
+        [System.Diagnostics.CodeAnalysis.SuppressMessageAttribute("Microsoft.Design", "CA1033:InterfaceMethodsShouldBeCallableByChildTypes")]
+        [System.Diagnostics.CodeAnalysis.SuppressMessageAttribute("Microsoft.Maintainability", "CA1502:AvoidExcessiveComplexity")]
+        [System.Diagnostics.CodeAnalysis.SuppressMessageAttribute("Microsoft.Performance", "CA1800:DoNotCastUnnecessarily")]
+        void System.Windows.Markup.IComponentConnector.Connect(int connectionId, object target) {
+            this._contentLoaded = true;
+        }
+    }
+}
+

src/Sharp/Data.Access/AccessDataService.cs

@@ -0,0 +1,503 @@
+using System.Data;
+using System.Data.OleDb;
+using System.Linq;
+using System.Reflection;
+using Microsoft.Extensions.Logging;
+using Sharp.Data.Access.Connections;
+using Sharp.Data.Access.Initialization;
+using Sharp.Data.Access.Internal;
+using Sharp.Data.Access.Options;
+using Sharp.Data.Access.Security;
+
+namespace Sharp.Data.Access;
+
+/// <summary>
+/// Access 数据库事务实现
+/// </summary>
+internal class AccessTransaction : IAccessTransaction
+{
+    private readonly OleDbConnection _connection;
+    private readonly OleDbTransaction _transaction;
+    private readonly ILogger? _logger;
+    private readonly bool _ownsConnection;
+    private bool _disposed;
+
+    public AccessTransaction(OleDbConnection connection, bool ownsConnection, ILogger? logger)
+    {
+        _connection = connection;
+        _ownsConnection = ownsConnection;
+        _transaction = connection.BeginTransaction();
+        _logger = logger;
+    }
+
+    public int Execute(string sql, params OleDbParameter[] parameters)
+    {
+        using var command = new OleDbCommand(sql, _connection, _transaction);
+        if (parameters.Length > 0)
+            command.Parameters.AddRange(parameters);
+
+        return command.ExecuteNonQuery();
+    }
+
+    public List<T> Query<T>(string sql, params OleDbParameter[] parameters) where T : new()
+    {
+        using var command = new OleDbCommand(sql, _connection, _transaction);
+        if (parameters.Length > 0)
+            command.Parameters.AddRange(parameters);
+
+        var results = new List<T>();
+        using var reader = command.ExecuteReader();
+
+        while (reader.Read())
+        {
+            var item = MapReaderToObject<T>(reader);
+            results.Add(item);
+        }
+
+        return results;
+    }
+
+    public object? ExecuteScalar(string sql, params OleDbParameter[] parameters)
+    {
+        using var command = new OleDbCommand(sql, _connection, _transaction);
+        if (parameters.Length > 0)
+            command.Parameters.AddRange(parameters);
+
+        return command.ExecuteScalar();
+    }
+
+    public void Commit()
+    {
+        _transaction.Commit();
+        _logger?.LogDebug("事务已提交");
+    }
+
+    public void Rollback()
+    {
+        _transaction.Rollback();
+        _logger?.LogDebug("事务已回滚");
+    }
+
+    public void Dispose()
+    {
+        if (_disposed) return;
+
+        try
+        {
+            _transaction.Dispose();
+        }
+        finally
+        {
+            if (_ownsConnection)
+            {
+                _connection.Dispose();
+            }
+        }
+
+        _disposed = true;
+    }
+
+    private static T MapReaderToObject<T>(IDataReader reader) where T : new()
+    {
+        var obj = new T();
+        var properties = typeof(T).GetProperties(BindingFlags.Public | BindingFlags.Instance);
+
+        // 创建字段名到索引的映射（大小写不敏感）
+        var fieldMap = new Dictionary<string, int>(StringComparer.OrdinalIgnoreCase);
+        for (int i = 0; i < reader.FieldCount; i++)
+        {
+            var fieldName = reader.GetName(i);
+            fieldMap[fieldName] = i;
+
+            // Access 列名有时包含末尾空格，提前做一次修剪以便映射
+            var trimmed = fieldName.Trim();
+            if (!fieldMap.ContainsKey(trimmed))
+            {
+                fieldMap[trimmed] = i;
+            }
+        }
+
+        foreach (var property in properties)
+        {
+            if (!property.CanWrite) continue;
+
+            try
+            {
+                // 尝试查找匹配的字段（大小写不敏感）
+                if (fieldMap.TryGetValue(property.Name, out int ordinal))
+                {
+                    var value = reader.GetValue(ordinal);
+
+                    if (value != DBNull.Value && value != null)
+                    {
+                        // 尝试类型转换
+                        if (property.PropertyType == value.GetType())
+                        {
+                            property.SetValue(obj, value);
+                        }
+                        else if (property.PropertyType == typeof(string))
+                        {
+                            property.SetValue(obj, value.ToString());
+                        }
+                        else
+                        {
+                            // 尝试使用 Convert.ChangeType
+                            var convertedValue = Convert.ChangeType(value, property.PropertyType);
+                            property.SetValue(obj, convertedValue);
+                        }
+                    }
+                }
+            }
+            catch
+            {
+                // 字段不存在或类型转换失败，保持默认值
+            }
+        }
+
+        return obj;
+    }
+}
+
+/// <summary>
+/// Access 数据服务实现（基于 System.Data.OleDb）
+/// </summary>
+public class AccessDataService : IAccessDataService
+{
+    private readonly AccessDatabaseOptions _options;
+    private readonly IAccessConnectionStringFactory _connectionFactory;
+    private readonly IAccessDatabaseInitializer _initializer;
+    private readonly IAccessPasswordDecryptor _decryptor;
+    private readonly ILogger<AccessDataService>? _logger;
+    private readonly string _connectionString;
+
+    public AccessDataService(
+        AccessDatabaseOptions options,
+        IAccessConnectionStringFactory? connectionFactory = null,
+        IAccessDatabaseInitializer? initializer = null,
+        IAccessPasswordDecryptor? decryptor = null,
+        ILogger<AccessDataService>? logger = null)
+    {
+        _options = options ?? throw new ArgumentNullException(nameof(options));
+        _options.Validate();
+
+        _connectionFactory = connectionFactory ?? new AccessConnectionStringFactory(decryptor ?? new PassthroughAccessPasswordDecryptor());
+        _initializer = initializer ?? new AccessDatabaseInitializer();
+        _decryptor = decryptor ?? new PassthroughAccessPasswordDecryptor();
+        _logger = logger;
+
+        try
+        {
+            // 确保数据库存在（如果配置了模板复制）
+            _initializer.EnsureDatabase(_options, NullServiceProvider.Instance);
+
+            // 构建连接字符串
+            _connectionString = _connectionFactory.Create(_options, NullServiceProvider.Instance);
+
+            _logger?.LogInformation("AccessDataService 已初始化，数据库: {DatabaseFile}, Provider: {Provider}",
+                _options.DatabaseFile, _options.ProviderName);
+            _logger?.LogDebug("实际连接字符串: {ConnectionString}", _connectionString);
+        }
+        catch (Exception ex)
+        {
+            _logger?.LogError(ex, "AccessDataService 初始化失败");
+
+            // 提供详细的错误诊断信息
+            if (ex.Message.Contains("找不到") || ex is FileNotFoundException)
+            {
+                throw new InvalidOperationException(
+                    $"找不到 Access 数据库文件: {_options.DatabaseFile}。" +
+                    $"请确保文件存在或配置 TemplateFile 以自动创建。", ex);
+            }
+
+            throw;
+        }
+    }
+
+    public List<T> Query<T>(string sql, params OleDbParameter[] parameters) where T : new()
+    {
+        _logger?.LogDebug("执行查询: {Sql}", sql);
+
+        return ExecuteWithRetry(() =>
+        {
+            using var connection = CreateConnection();
+            connection.Open();
+
+            using var command = new OleDbCommand(sql, connection);
+            if (parameters.Length > 0)
+            {
+                // 克隆参数以避免重试时的"已包含在另一个集合中"错误
+                var clonedParams = parameters.Select(p => CloneParameter(p)).ToArray();
+                command.Parameters.AddRange(clonedParams);
+            }
+
+            var results = new List<T>();
+            using var reader = command.ExecuteReader();
+
+            while (reader.Read())
+            {
+                var item = MapReaderToObject<T>(reader);
+                results.Add(item);
+            }
+
+            _logger?.LogDebug("查询返回 {Count} 条记录", results.Count);
+            return results;
+        });
+    }
+
+    public T? QueryFirstOrDefault<T>(string sql, params OleDbParameter[] parameters) where T : new()
+    {
+        _logger?.LogDebug("执行单条查询: {Sql}", sql);
+
+        return ExecuteWithRetry(() =>
+        {
+            using var connection = CreateConnection();
+            connection.Open();
+
+            using var command = new OleDbCommand(sql, connection);
+            if (parameters.Length > 0)
+            {
+                // 克隆参数以避免重试时的"已包含在另一个集合中"错误
+                var clonedParams = parameters.Select(p => CloneParameter(p)).ToArray();
+                command.Parameters.AddRange(clonedParams);
+            }
+
+            using var reader = command.ExecuteReader();
+
+            if (reader.Read())
+            {
+                return MapReaderToObject<T>(reader);
+            }
+
+            return default;
+        });
+    }
+
+    public object? ExecuteScalar(string sql, params OleDbParameter[] parameters)
+    {
+        _logger?.LogDebug("执行标量查询: {Sql}", sql);
+
+        return ExecuteWithRetry(() =>
+        {
+            using var connection = CreateConnection();
+            connection.Open();
+
+            using var command = new OleDbCommand(sql, connection);
+            if (parameters.Length > 0)
+            {
+                // 克隆参数以避免重试时的"已包含在另一个集合中"错误
+                var clonedParams = parameters.Select(p => CloneParameter(p)).ToArray();
+                command.Parameters.AddRange(clonedParams);
+            }
+
+            var result = command.ExecuteScalar();
+            _logger?.LogDebug("标量查询返回: {Result}", result);
+            return result;
+        });
+    }
+
+    public int Execute(string sql, params OleDbParameter[] parameters)
+    {
+        _logger?.LogDebug("执行命令: {Sql}", sql);
+
+        return ExecuteWithRetry(() =>
+        {
+            using var connection = CreateConnection();
+            connection.Open();
+
+            using var command = new OleDbCommand(sql, connection);
+            if (parameters.Length > 0)
+            {
+                // 克隆参数以避免重试时的"已包含在另一个集合中"错误
+                var clonedParams = parameters.Select(p => CloneParameter(p)).ToArray();
+                command.Parameters.AddRange(clonedParams);
+            }
+
+            var rowsAffected = command.ExecuteNonQuery();
+            _logger?.LogDebug("命令影响了 {RowsAffected} 行", rowsAffected);
+            return rowsAffected;
+        });
+    }
+
+    public IAccessTransaction BeginTransaction()
+    {
+        _logger?.LogDebug("开始事务");
+        var connection = CreateConnection();
+        connection.Open();
+        return new AccessTransaction(connection, ownsConnection: true, _logger);
+    }
+
+    public void ExecuteInTransaction(Action<IAccessTransaction> action)
+    {
+        _logger?.LogDebug("在事务中执行操作");
+
+        using var transaction = BeginTransaction();
+        try
+        {
+            action(transaction);
+            transaction.Commit();
+            _logger?.LogDebug("事务执行成功");
+        }
+        catch (Exception ex)
+        {
+            _logger?.LogError(ex, "事务执行失败，正在回滚");
+            transaction.Rollback();
+            throw;
+        }
+    }
+
+    public bool TestConnection()
+    {
+        try
+        {
+            _logger?.LogDebug("测试数据库连接");
+            using var connection = CreateConnection();
+            connection.Open();
+            _logger?.LogDebug("数据库连接成功");
+            return true;
+        }
+        catch (Exception ex)
+        {
+            _logger?.LogError(ex, "数据库连接失败");
+            return false;
+        }
+    }
+
+    private OleDbConnection CreateConnection()
+    {
+        return new OleDbConnection(_connectionString);
+    }
+
+    private T ExecuteWithRetry<T>(Func<T> operation)
+    {
+        var maxRetries = _options.MaxRetryCount;
+        var retryDelay = _options.RetryDelayMilliseconds;
+
+        for (int attempt = 0; attempt <= maxRetries; attempt++)
+        {
+            try
+            {
+                return operation();
+            }
+            catch (OleDbException ex) when (attempt < maxRetries && IsRetriableError(ex))
+            {
+                _logger?.LogWarning(ex, "数据库操作失败，正在重试 ({Attempt}/{MaxRetries})...", attempt + 1, maxRetries);
+                Thread.Sleep(retryDelay);
+            }
+            catch (OleDbException ex)
+            {
+                // 提供详细的错误诊断信息
+                var errorMessage = $"Access 数据库操作失败: {ex.Message}";
+
+                // 检查是否是 Provider 相关的错误
+                if (ex.Message.Contains("找不到") || ex.Message.Contains("未注册") ||
+                    ex.Message.Contains("OLE DB") || ex.Message.Contains("多步"))
+                {
+                    errorMessage += $"\n\n可能的原因：" +
+                        $"\n1. 未安装 Access Database Engine：当前使用 Provider = {_options.ProviderName}" +
+                        $"\n   - 如果使用 16.0，需要安装 Access Database Engine 2016 或 Office 2016+" +
+                        $"\n   - 如果使用 12.0，需要安装 Access Database Engine 2010 或 Office 2010+" +
+                        $"\n   - 建议：优先使用 12.0 版本，兼容性最好" +
+                        $"\n2. 32位/64位不匹配：进程架构必须与 Access Driver 架构一致" +
+                        $"\n3. 数据库文件损坏或被其他程序锁定" +
+                        $"\n4. 数据库文件路径不正确：{_options.DatabaseFile}";
+
+                    _logger?.LogError(ex, "数据库连接失败，Provider: {Provider}", _options.ProviderName);
+                }
+
+                throw new InvalidOperationException(errorMessage, ex);
+            }
+        }
+
+        // 不会到这里，因为最后一次尝试会抛出异常
+        throw new InvalidOperationException("重试逻辑错误");
+    }
+
+    private static bool IsRetriableError(OleDbException ex)
+    {
+        // Access 数据库常见的可重试错误
+        // -2147467259: 数据库被锁定
+        // -2147217865: 无法打开数据库（可能正在被其他进程使用）
+        return ex.ErrorCode == -2147467259 || ex.ErrorCode == -2147217865;
+    }
+
+    /// <summary>
+    /// 克隆 OleDbParameter 以避免重试时参数被重复添加的问题
+    /// </summary>
+    private static OleDbParameter CloneParameter(OleDbParameter original)
+    {
+        var clone = new OleDbParameter
+        {
+            ParameterName = original.ParameterName,
+            Value = original.Value,
+            OleDbType = original.OleDbType,
+            Size = original.Size,
+            Direction = original.Direction,
+            IsNullable = original.IsNullable,
+            Precision = original.Precision,
+            Scale = original.Scale,
+            SourceColumn = original.SourceColumn,
+            SourceVersion = original.SourceVersion
+        };
+        return clone;
+    }
+
+    private static T MapReaderToObject<T>(IDataReader reader) where T : new()
+    {
+        var obj = new T();
+        var properties = typeof(T).GetProperties(BindingFlags.Public | BindingFlags.Instance);
+
+        // 创建字段名到索引的映射（大小写不敏感）
+        var fieldMap = new Dictionary<string, int>(StringComparer.OrdinalIgnoreCase);
+        for (int i = 0; i < reader.FieldCount; i++)
+        {
+            var fieldName = reader.GetName(i);
+            fieldMap[fieldName] = i;
+
+            // Access 列名有时包含末尾空格，提前做一次修剪以便映射
+            var trimmed = fieldName.Trim();
+            if (!fieldMap.ContainsKey(trimmed))
+            {
+                fieldMap[trimmed] = i;
+            }
+        }
+
+        foreach (var property in properties)
+        {
+            if (!property.CanWrite) continue;
+
+            try
+            {
+                // 尝试查找匹配的字段（大小写不敏感）
+                if (fieldMap.TryGetValue(property.Name, out int ordinal))
+                {
+                    var value = reader.GetValue(ordinal);
+
+                    if (value != DBNull.Value && value != null)
+                    {
+                        // 尝试类型转换
+                        if (property.PropertyType == value.GetType())
+                        {
+                            property.SetValue(obj, value);
+                        }
+                        else if (property.PropertyType == typeof(string))
+                        {
+                            property.SetValue(obj, value.ToString());
+                        }
+                        else
+                        {
+                            // 尝试使用 Convert.ChangeType
+                            var convertedValue = Convert.ChangeType(value, property.PropertyType);
+                            property.SetValue(obj, convertedValue);
+                        }
+                    }
+                }
+            }
+            catch
+            {
+                // 字段不存在或类型转换失败，保持默认值
+            }
+        }
+
+        return obj;
+    }
+}

src/Sharp/Data.Access/AccessDataServiceExtensions.cs

@@ -0,0 +1,118 @@
+using Microsoft.Extensions.DependencyInjection;
+using Microsoft.Extensions.DependencyInjection.Extensions;
+using Sharp.Data.Access.Options;
+using Sharp.Data.Access.Security;
+using Sharp.Data.Access.Connections;
+using Sharp.Data.Access.Initialization;
+
+namespace Sharp.Data.Access;
+
+/// <summary>
+/// Access 数据服务的依赖注入扩展
+/// </summary>
+public static class AccessDataServiceExtensions
+{
+    /// <summary>
+    /// 添加 Access 数据服务（最简单方式 - 仅指定数据库路径）
+    /// </summary>
+    /// <param name="services">服务集合</param>
+    /// <param name="databasePath">数据库文件路径（绝对或相对路径）</param>
+    /// <param name="password">数据库密码（可选）</param>
+    /// <param name="provider">OLE DB 提供程序，默认：Microsoft.ACE.OLEDB.16.0</param>
+    /// <returns>服务集合</returns>
+    public static IServiceCollection AddAccessDataService(
+        this IServiceCollection services,
+        string databasePath,
+        string? password = null,
+        string? provider = null)
+    {
+        return services.AddAccessDataService(options =>
+        {
+            options.DatabaseFile = databasePath;
+            if (!string.IsNullOrEmpty(password))
+                options.Password = password;
+            if (!string.IsNullOrEmpty(provider))
+                options.ProviderName = provider;
+        });
+    }
+
+    /// <summary>
+    /// 添加 Access 数据服务（使用配置委托）
+    /// </summary>
+    /// <param name="services">服务集合</param>
+    /// <param name="configureOptions">配置委托</param>
+    /// <returns>服务集合</returns>
+    public static IServiceCollection AddAccessDataService(
+        this IServiceCollection services,
+        Action<AccessDatabaseOptions> configureOptions)
+    {
+        if (services == null) throw new ArgumentNullException(nameof(services));
+        if (configureOptions == null) throw new ArgumentNullException(nameof(configureOptions));
+
+        var options = new AccessDatabaseOptions();
+        configureOptions(options);
+        options.Validate();
+
+        // 注册核心服务
+        services.TryAddSingleton<IAccessPasswordDecryptor, PassthroughAccessPasswordDecryptor>();
+        services.TryAddSingleton<IAccessConnectionStringFactory>(sp =>
+            new AccessConnectionStringFactory(sp.GetRequiredService<IAccessPasswordDecryptor>()));
+        services.TryAddSingleton<IAccessDatabaseInitializer, AccessDatabaseInitializer>();
+
+        // 注册配置
+        services.AddSingleton(options);
+
+        // 注册 AccessDataService
+        services.AddSingleton<IAccessDataService>(sp =>
+            new AccessDataService(
+                options,
+                sp.GetRequiredService<IAccessConnectionStringFactory>(),
+                sp.GetRequiredService<IAccessDatabaseInitializer>(),
+                sp.GetRequiredService<IAccessPasswordDecryptor>(),
+                sp.GetService<Microsoft.Extensions.Logging.ILogger<AccessDataService>>()));
+
+        return services;
+    }
+
+    /// <summary>
+    /// 添加 Access 数据服务（使用配置对象）
+    /// </summary>
+    /// <param name="services">服务集合</param>
+    /// <param name="options">配置选项</param>
+    /// <returns>服务集合</returns>
+    public static IServiceCollection AddAccessDataService(
+        this IServiceCollection services,
+        AccessDatabaseOptions options)
+    {
+        if (options == null) throw new ArgumentNullException(nameof(options));
+
+        return services.AddAccessDataService(_ => { });
+    }
+
+    /// <summary>
+    /// 注册自定义密码解密器
+    /// </summary>
+    /// <typeparam name="TDecryptor">解密器类型</typeparam>
+    /// <param name="services">服务集合</param>
+    /// <returns>服务集合</returns>
+    public static IServiceCollection AddAccessPasswordDecryptor<TDecryptor>(this IServiceCollection services)
+        where TDecryptor : class, IAccessPasswordDecryptor
+    {
+        services.AddSingleton<IAccessPasswordDecryptor, TDecryptor>();
+        return services;
+    }
+
+    /// <summary>
+    /// 注册自定义密码解密器（使用工厂方法）
+    /// </summary>
+    /// <param name="services">服务集合</param>
+    /// <param name="implementationFactory">解密器工厂</param>
+    /// <returns>服务集合</returns>
+    public static IServiceCollection AddAccessPasswordDecryptor(
+        this IServiceCollection services,
+        Func<IServiceProvider, IAccessPasswordDecryptor> implementationFactory)
+    {
+        services.AddSingleton(implementationFactory);
+        return services;
+    }
+}

src/Sharp/Data.Access/Connections/AccessConnectionStringFactory.cs

@@ -0,0 +1,58 @@
+using System;
+using System.Data.OleDb;
+using Sharp.Data.Access.Internal;
+using Sharp.Data.Access.Options;
+using Sharp.Data.Access.Security;
+
+namespace Sharp.Data.Access.Connections;
+
+internal sealed class AccessConnectionStringFactory : IAccessConnectionStringFactory
+{
+    private readonly IAccessPasswordDecryptor _decryptor;
+
+    public AccessConnectionStringFactory(IAccessPasswordDecryptor decryptor)
+    {
+        _decryptor = decryptor ?? throw new ArgumentNullException(nameof(decryptor));
+    }
+
+    public string Create(AccessDatabaseOptions options, IServiceProvider services)
+    {
+        var configuration = AccessDatabaseConfiguration.FromOptions(options, services);
+
+        if (!string.IsNullOrWhiteSpace(configuration.ConnectionString))
+        {
+            return configuration.ConnectionString;
+        }
+
+        if (string.IsNullOrWhiteSpace(configuration.DatabaseFile))
+        {
+            throw new InvalidOperationException("Access 数据库需要提供 DatabaseFile 或 ConnectionString。");
+        }
+
+        // 基础连接字符串
+        // 注意：Connect Timeout 参数在某些 ACE 版本中不稳定，已移除
+        var builder = new OleDbConnectionStringBuilder
+        {
+            ["Provider"] = configuration.ProviderName,
+            ["Data Source"] = AccessPathResolver.Resolve(configuration.DatabaseFile, configuration.DataDirectory)
+        };
+
+        var password = configuration.Password;
+        if (string.IsNullOrEmpty(password) && !string.IsNullOrWhiteSpace(configuration.EncryptedPassword))
+        {
+            password = _decryptor.Decrypt(configuration.EncryptedPassword);
+        }
+
+        if (!string.IsNullOrEmpty(password))
+        {
+            builder["Jet OLEDB:Database Password"] = password;
+        }
+
+        foreach (var parameter in configuration.AdditionalParameters)
+        {
+            builder[parameter.Key] = parameter.Value;
+        }
+
+        return builder.ConnectionString;
+    }
+}

src/Sharp/Data.Access/Connections/IAccessConnectionStringFactory.cs

@@ -0,0 +1,12 @@
+using System;
+using Sharp.Data.Access.Options;
+
+namespace Sharp.Data.Access.Connections;
+
+/// <summary>
+/// 构建 Access 连接字符串的工厂。
+/// </summary>
+public interface IAccessConnectionStringFactory
+{
+    string Create(AccessDatabaseOptions options, IServiceProvider services);
+}

src/Sharp/Data.Access/Data.Access.csproj

@@ -0,0 +1,20 @@
+<Project Sdk="Microsoft.NET.Sdk">
+
+  <PropertyGroup>
+    <TargetFramework>net8.0</TargetFramework>
+    <ImplicitUsings>enable</ImplicitUsings>
+    <Nullable>enable</Nullable>
+    <RootNamespace>Sharp.Data.Access</RootNamespace>
+  </PropertyGroup>
+
+  <ItemGroup>
+    <PackageReference Include="EntityFrameworkCore.Jet" Version="8.0.0-preview1" />
+    <PackageReference Include="Microsoft.Extensions.DependencyInjection.Abstractions" Version="8.0.1" />
+    <PackageReference Include="System.Data.OleDb" Version="8.0.0" />
+  </ItemGroup>
+
+  <ItemGroup>
+    <ProjectReference Include="..\Data\Data.csproj" />
+  </ItemGroup>
+
+</Project>

src/Sharp/Data.Access/DependencyInjection/AccessServiceCollectionExtensions.cs

@@ -0,0 +1,72 @@
+using System;
+using Microsoft.EntityFrameworkCore;
+using Microsoft.Extensions.DependencyInjection;
+using Microsoft.Extensions.DependencyInjection.Extensions;
+using Sharp.Data.Access.Connections;
+using Sharp.Data.Access.Initialization;
+using Sharp.Data.Access.Internal;
+using Sharp.Data.Access.Options;
+using Sharp.Data.Access.Security;
+using Sharp.Data.Context;
+
+namespace Sharp.Data.Access.DependencyInjection;
+
+/// <summary>
+/// Access 模块的依赖注入扩展。
+/// </summary>
+public static class AccessServiceCollectionExtensions
+{
+    public static IServiceCollection AddAccessDataContext<TContext>(this IServiceCollection services,
+        Action<AccessContextOptions<TContext>> configure,
+        bool registerDataContext = true,
+        ServiceLifetime dataContextLifetime = ServiceLifetime.Scoped)
+        where TContext : DbContext
+    {
+        if (configure == null) throw new ArgumentNullException(nameof(configure));
+
+        return services.AddAccessDataContext(_ =>
+        {
+            var options = new AccessContextOptions<TContext>();
+            configure(options);
+            return options;
+        }, registerDataContext, dataContextLifetime);
+    }
+
+    public static IServiceCollection AddAccessDataContext<TContext>(this IServiceCollection services,
+        Func<IServiceProvider, AccessContextOptions<TContext>> configure,
+        bool registerDataContext = true,
+        ServiceLifetime dataContextLifetime = ServiceLifetime.Scoped)
+        where TContext : DbContext
+    {
+        if (services == null) throw new ArgumentNullException(nameof(services));
+        if (configure == null) throw new ArgumentNullException(nameof(configure));
+
+        services.TryAddSingleton<IAccessPasswordDecryptor, PassthroughAccessPasswordDecryptor>();
+        services.TryAddSingleton<IAccessConnectionStringFactory>(sp =>
+            new AccessConnectionStringFactory(sp.GetRequiredService<IAccessPasswordDecryptor>()));
+        services.TryAddSingleton<IAccessDatabaseInitializer, AccessDatabaseInitializer>();
+
+        services.TryAddSingleton(provider =>
+        {
+            var options = configure(provider) ?? throw new InvalidOperationException("AccessContextOptions 不能为空。");
+            options.Validate();
+            return options;
+        });
+
+        services.AddScoped<IAccessDataContextFactory<TContext>>(sp =>
+            new AccessDataContextFactory<TContext>(
+                sp,
+                sp.GetRequiredService<AccessContextOptions<TContext>>(),
+                sp.GetRequiredService<IAccessConnectionStringFactory>(),
+                sp.GetRequiredService<IAccessDatabaseInitializer>()));
+
+        if (registerDataContext)
+        {
+            services.Add(new ServiceDescriptor(typeof(IDataContext),
+                sp => sp.GetRequiredService<IAccessDataContextFactory<TContext>>().Create(),
+                dataContextLifetime));
+        }
+
+        return services;
+    }
+}

src/Sharp/Data.Access/Extensions/AccessDataContextBuilderExtensions.cs

@@ -0,0 +1,66 @@
+using System;
+using EntityFrameworkCore.Jet;
+using EntityFrameworkCore.Jet.Infrastructure;
+using Microsoft.EntityFrameworkCore;
+using Sharp.Data.Access.Connections;
+using Sharp.Data.Access.Initialization;
+using Sharp.Data.Access.Internal;
+using Sharp.Data.Access.Options;
+using Sharp.Data.Access.Security;
+using Sharp.Data;
+
+namespace Sharp.Data.Access.Extensions;
+
+/// <summary>
+/// 手动使用 DataContextBuilder 时的 Access Helper。
+/// </summary>
+public static class AccessDataContextBuilderExtensions
+{
+    /// <summary>
+    /// 通过现成的连接字符串配置 Access。
+    /// </summary>
+    public static DataContextBuilder<TContext> UseAccessDatabase<TContext>(
+        this DataContextBuilder<TContext> builder,
+        string connectionString,
+        Action<JetDbContextOptionsBuilder>? configure = null)
+        where TContext : DbContext
+    {
+        if (builder == null) throw new ArgumentNullException(nameof(builder));
+        if (string.IsNullOrWhiteSpace(connectionString))
+        {
+            throw new ArgumentException("连接字符串不能为空。", nameof(connectionString));
+        }
+
+        builder.ConfigureDbContext(options => options.UseJet(connectionString, configure));
+        return builder;
+    }
+
+    /// <summary>
+    /// 通过 AccessDatabaseOptions 配置 Access。
+    /// </summary>
+    public static DataContextBuilder<TContext> UseAccessDatabase<TContext>(
+        this DataContextBuilder<TContext> builder,
+        Action<AccessDatabaseOptions> configureOptions,
+        IServiceProvider? services = null,
+        IAccessPasswordDecryptor? decryptor = null,
+        Action<JetDbContextOptionsBuilder>? configure = null)
+        where TContext : DbContext
+    {
+        if (builder == null) throw new ArgumentNullException(nameof(builder));
+        if (configureOptions == null) throw new ArgumentNullException(nameof(configureOptions));
+
+        var options = new AccessDatabaseOptions();
+        configureOptions(options);
+        options.Validate();
+
+        var serviceProvider = services ?? NullServiceProvider.Instance;
+        var initializer = new AccessDatabaseInitializer();
+        var connectionFactory = new AccessConnectionStringFactory(decryptor ?? new PassthroughAccessPasswordDecryptor());
+
+        initializer.EnsureDatabase(options, serviceProvider);
+        var connectionString = connectionFactory.Create(options, serviceProvider);
+        builder.ConfigureDbContext(o => o.UseJet(connectionString, configure));
+
+        return builder;
+    }
+}

src/Sharp/Data.Access/IAccessDataContextFactory.cs

@@ -0,0 +1,12 @@
+using Microsoft.EntityFrameworkCore;
+using Sharp.Data.Context;
+
+namespace Sharp.Data.Access;
+
+/// <summary>
+/// Access 数据上下文工厂，避免直接依赖具体实现。
+/// </summary>
+public interface IAccessDataContextFactory<TContext> where TContext : DbContext
+{
+    IDataContext Create();
+}

src/Sharp/Data.Access/IAccessDataService.cs

@@ -0,0 +1,75 @@
+using System.Data.OleDb;
+
+namespace Sharp.Data.Access;
+
+/// <summary>
+/// Access 数据库事务接口
+/// </summary>
+public interface IAccessTransaction : IDisposable
+{
+    /// <summary>
+    /// 执行非查询命令（INSERT, UPDATE, DELETE）
+    /// </summary>
+    int Execute(string sql, params OleDbParameter[] parameters);
+
+    /// <summary>
+    /// 查询多条记录
+    /// </summary>
+    List<T> Query<T>(string sql, params OleDbParameter[] parameters) where T : new();
+
+    /// <summary>
+    /// 执行标量查询（COUNT, SUM等）
+    /// </summary>
+    object? ExecuteScalar(string sql, params OleDbParameter[] parameters);
+
+    /// <summary>
+    /// 提交事务
+    /// </summary>
+    void Commit();
+
+    /// <summary>
+    /// 回滚事务
+    /// </summary>
+    void Rollback();
+}
+
+/// <summary>
+/// Access 数据服务接口（基于 System.Data.OleDb）
+/// </summary>
+public interface IAccessDataService
+{
+    /// <summary>
+    /// 查询多条记录
+    /// </summary>
+    List<T> Query<T>(string sql, params OleDbParameter[] parameters) where T : new();
+
+    /// <summary>
+    /// 查询单条记录
+    /// </summary>
+    T? QueryFirstOrDefault<T>(string sql, params OleDbParameter[] parameters) where T : new();
+
+    /// <summary>
+    /// 执行标量查询（COUNT, SUM等）
+    /// </summary>
+    object? ExecuteScalar(string sql, params OleDbParameter[] parameters);
+
+    /// <summary>
+    /// 执行非查询命令（INSERT, UPDATE, DELETE）
+    /// </summary>
+    int Execute(string sql, params OleDbParameter[] parameters);
+
+    /// <summary>
+    /// 开始事务
+    /// </summary>
+    IAccessTransaction BeginTransaction();
+
+    /// <summary>
+    /// 在事务中执行操作（自动提交/回滚）
+    /// </summary>
+    void ExecuteInTransaction(Action<IAccessTransaction> action);
+
+    /// <summary>
+    /// 测试数据库连接
+    /// </summary>
+    bool TestConnection();
+}

src/Sharp/Data.Access/Initialization/AccessDatabaseInitializer.cs

@@ -0,0 +1,49 @@
+using System;
+using System.IO;
+using Sharp.Data.Access.Internal;
+using Sharp.Data.Access.Options;
+
+namespace Sharp.Data.Access.Initialization;
+
+internal sealed class AccessDatabaseInitializer : IAccessDatabaseInitializer
+{
+    public void EnsureDatabase(AccessDatabaseOptions options, IServiceProvider services)
+    {
+        var configuration = AccessDatabaseConfiguration.FromOptions(options, services);
+
+        if (!string.IsNullOrWhiteSpace(configuration.ConnectionString) ||
+            string.IsNullOrWhiteSpace(configuration.DatabaseFile))
+        {
+            return;
+        }
+
+        var databasePath = AccessPathResolver.Resolve(configuration.DatabaseFile, configuration.DataDirectory);
+        var directory = Path.GetDirectoryName(databasePath);
+        if (!string.IsNullOrEmpty(directory) && !Directory.Exists(directory))
+        {
+            Directory.CreateDirectory(directory);
+        }
+
+        if (File.Exists(databasePath))
+        {
+            return;
+        }
+
+        if (configuration.CopyTemplateWhenMissing && !string.IsNullOrWhiteSpace(configuration.TemplateFile))
+        {
+            var templatePath = AccessPathResolver.Resolve(configuration.TemplateFile, configuration.DataDirectory);
+            if (!File.Exists(templatePath))
+            {
+                throw new FileNotFoundException($"Access 模板文件 \"{templatePath}\" 不存在。", templatePath);
+            }
+
+            File.Copy(templatePath, databasePath);
+            return;
+        }
+
+        if (configuration.ThrowIfMissing)
+        {
+            throw new FileNotFoundException($"Access 数据库 \"{databasePath}\" 不存在。", databasePath);
+        }
+    }
+}

src/Sharp/Data.Access/Initialization/IAccessDatabaseInitializer.cs

@@ -0,0 +1,12 @@
+using System;
+using Sharp.Data.Access.Options;
+
+namespace Sharp.Data.Access.Initialization;
+
+/// <summary>
+/// Access 数据库初始化器（确保目录/数据库文件准备就绪）。
+/// </summary>
+public interface IAccessDatabaseInitializer
+{
+    void EnsureDatabase(AccessDatabaseOptions options, IServiceProvider services);
+}

src/Sharp/Data.Access/Internal/AccessDataContextFactory.cs

@@ -0,0 +1,48 @@
+using System;
+using EntityFrameworkCore.Jet;
+using Microsoft.EntityFrameworkCore;
+using Sharp.Data;
+using Sharp.Data.Access.Connections;
+using Sharp.Data.Access.Initialization;
+using Sharp.Data.Access.Options;
+using Sharp.Data.Context;
+
+namespace Sharp.Data.Access.Internal;
+
+internal sealed class AccessDataContextFactory<TContext> : IAccessDataContextFactory<TContext>
+    where TContext : DbContext
+{
+    private readonly IServiceProvider _services;
+    private readonly AccessContextOptions<TContext> _options;
+    private readonly IAccessConnectionStringFactory _connectionFactory;
+    private readonly IAccessDatabaseInitializer _initializer;
+
+    public AccessDataContextFactory(
+        IServiceProvider services,
+        AccessContextOptions<TContext> options,
+        IAccessConnectionStringFactory connectionFactory,
+        IAccessDatabaseInitializer initializer)
+    {
+        _services = services;
+        _options = options;
+        _connectionFactory = connectionFactory;
+        _initializer = initializer;
+    }
+
+    public IDataContext Create()
+    {
+        var builder = new DataContextBuilder<TContext>();
+
+        _initializer.EnsureDatabase(_options.Database, _services);
+
+        var connectionString = _connectionFactory.Create(_options.Database, _services);
+        builder.ConfigureDbContext(options =>
+        {
+            options.UseJet(connectionString, jet => _options.ConfigureJet?.Invoke(jet));
+        });
+
+        _options.ConfigureDataContext?.Invoke(_services, builder);
+
+        return builder.Build();
+    }
+}

src/Sharp/Data.Access/Internal/AccessDatabaseConfiguration.cs

@@ -0,0 +1,61 @@
+using System;
+using System.Collections.Generic;
+using Sharp.Data.Access.Options;
+
+namespace Sharp.Data.Access.Internal;
+
+internal sealed record AccessDatabaseConfiguration(
+    string? ConnectionString,
+    string? DatabaseFile,
+    string ProviderName,
+    string? Password,
+    string? EncryptedPassword,
+    string? TemplateFile,
+    string? DataDirectory,
+    int ConnectionTimeout,
+    int MaxRetryCount,
+    int RetryDelayMilliseconds,
+    IReadOnlyDictionary<string, string> AdditionalParameters,
+    bool CopyTemplateWhenMissing,
+    bool ThrowIfMissing)
+{
+    public static AccessDatabaseConfiguration FromOptions(AccessDatabaseOptions options, IServiceProvider services)
+    {
+        if (options == null)
+        {
+            throw new ArgumentNullException(nameof(options));
+        }
+
+        var connectionString = Resolve(options.ConnectionString, options.ConnectionStringFactory, services);
+        var databaseFile = Resolve(options.DatabaseFile, options.DatabaseFileFactory, services);
+        var templateFile = Resolve(options.TemplateFile, options.TemplateFileFactory, services);
+        var dataDirectory = Resolve(options.DataDirectory, options.DataDirectoryFactory, services);
+        var password = Resolve(options.Password, options.PasswordFactory, services);
+        var encryptedPassword = Resolve(options.EncryptedPassword, options.EncryptedPasswordFactory, services);
+
+        return new AccessDatabaseConfiguration(
+            connectionString,
+            databaseFile,
+            string.IsNullOrWhiteSpace(options.ProviderName) ? AccessProviderNames.AceOleDb16 : options.ProviderName,
+            password,
+            encryptedPassword,
+            templateFile,
+            dataDirectory,
+            options.ConnectionTimeout,
+            options.MaxRetryCount,
+            options.RetryDelayMilliseconds,
+            new Dictionary<string, string>(options.AdditionalParameters, StringComparer.OrdinalIgnoreCase),
+            options.CopyTemplateWhenMissing,
+            options.ThrowIfMissing);
+    }
+
+    private static string? Resolve(string? value, Func<IServiceProvider, string?>? factory, IServiceProvider services)
+    {
+        if (!string.IsNullOrWhiteSpace(value))
+        {
+            return value;
+        }
+
+        return factory?.Invoke(services);
+    }
+}

src/Sharp/Data.Access/Internal/AccessPathResolver.cs

@@ -0,0 +1,26 @@
+using System;
+using System.IO;
+
+namespace Sharp.Data.Access.Internal;
+
+internal static class AccessPathResolver
+{
+    public static string Resolve(string path, string? baseDirectory)
+    {
+        if (string.IsNullOrWhiteSpace(path))
+        {
+            throw new InvalidOperationException("Access 数据库路径不能为空。");
+        }
+
+        if (Path.IsPathFullyQualified(path))
+        {
+            return Path.GetFullPath(path);
+        }
+
+        var root = string.IsNullOrWhiteSpace(baseDirectory)
+            ? AppContext.BaseDirectory
+            : baseDirectory!;
+
+        return Path.GetFullPath(Path.Combine(root, path));
+    }
+}

src/Sharp/Data.Access/Internal/NullServiceProvider.cs

@@ -0,0 +1,14 @@
+using System;
+
+namespace Sharp.Data.Access.Internal;
+
+internal sealed class NullServiceProvider : IServiceProvider
+{
+    public static readonly NullServiceProvider Instance = new();
+
+    private NullServiceProvider()
+    {
+    }
+
+    public object? GetService(Type serviceType) => null;
+}

src/Sharp/Data.Access/Options/AccessContextOptions.cs

@@ -0,0 +1,30 @@
+using System;
+using EntityFrameworkCore.Jet.Infrastructure;
+using Microsoft.EntityFrameworkCore;
+using Sharp.Data;
+
+namespace Sharp.Data.Access.Options;
+
+/// <summary>
+/// Access 数据上下文注册配置。
+/// </summary>
+/// <typeparam name="TContext">EF Core DbContext 类型。</typeparam>
+public sealed class AccessContextOptions<TContext> where TContext : DbContext
+{
+    /// <summary>
+    /// Access 数据库配置（连接方式、密码等）。
+    /// </summary>
+    public AccessDatabaseOptions Database { get; } = new();
+
+    /// <summary>
+    /// 允许调用方在 Build 之前继续配置 DataContextBuilder（例如启用审计、软删除、当前用户等）。
+    /// </summary>
+    public Action<IServiceProvider, DataContextBuilder<TContext>>? ConfigureDataContext { get; set; }
+
+    /// <summary>
+    /// 细化 Jet Provider 选项。
+    /// </summary>
+    public Action<JetDbContextOptionsBuilder>? ConfigureJet { get; set; }
+
+    internal void Validate() => Database.Validate();
+}

src/Sharp/Data.Access/Options/AccessDatabaseOptions.cs

@@ -0,0 +1,143 @@
+using System;
+using System.Collections.Generic;
+
+namespace Sharp.Data.Access.Options;
+
+/// <summary>
+/// Access 数据库统一配置项，同时支持 OleDb 和 EF Core 两种方式。
+/// </summary>
+public class AccessDatabaseOptions
+{
+    /// <summary>
+    /// 完整的连接字符串，可选。如果提供则优先使用，不再重新构建。
+    /// </summary>
+    public string? ConnectionString { get; set; }
+
+    /// <summary>
+    /// 通过依赖注入动态生成连接字符串。
+    /// </summary>
+    public Func<IServiceProvider, string?>? ConnectionStringFactory { get; set; }
+
+    /// <summary>
+    /// Access 数据库文件路径（相对或绝对）。
+    /// </summary>
+    public string? DatabaseFile { get; set; }
+
+    /// <summary>
+    /// 通过依赖注入动态解析数据库文件路径。
+    /// </summary>
+    public Func<IServiceProvider, string?>? DatabaseFileFactory { get; set; }
+
+    /// <summary>
+    /// 数据文件的基础目录（如果数据库路径为相对路径则会拼接）。
+    /// 默认使用 <see cref="AppContext.BaseDirectory" />。
+    /// </summary>
+    public string? DataDirectory { get; set; }
+
+    /// <summary>
+    /// 通过依赖注入动态解析数据目录。
+    /// </summary>
+    public Func<IServiceProvider, string?>? DataDirectoryFactory { get; set; }
+
+    /// <summary>
+    /// 明文密码，可选。用于访问加密的 Access 数据库。
+    /// </summary>
+    public string? Password { get; set; }
+
+    /// <summary>
+    /// 通过依赖注入动态解析明文密码。
+    /// </summary>
+    public Func<IServiceProvider, string?>? PasswordFactory { get; set; }
+
+    /// <summary>
+    /// 加密后的密码，可选。将通过 <see cref="Security.IAccessPasswordDecryptor" /> 解密。
+    /// </summary>
+    public string? EncryptedPassword { get; set; }
+
+    /// <summary>
+    /// 通过依赖注入动态解析加密密码。
+    /// </summary>
+    public Func<IServiceProvider, string?>? EncryptedPasswordFactory { get; set; }
+
+    /// <summary>
+    /// 数据库模板（*.mdb / *.accdb），在文件不存在时复制一份。
+    /// </summary>
+    public string? TemplateFile { get; set; }
+
+    /// <summary>
+    /// 通过依赖注入动态解析模板文件路径。
+    /// </summary>
+    public Func<IServiceProvider, string?>? TemplateFileFactory { get; set; }
+
+    /// <summary>
+    /// 当数据库文件缺失时是否尝试从模板复制。
+    /// </summary>
+    public bool CopyTemplateWhenMissing { get; set; } = true;
+
+    /// <summary>
+    /// 当数据库文件缺失（且无法复制）时是否抛出异常。
+    /// </summary>
+    public bool ThrowIfMissing { get; set; } = true;
+
+    /// <summary>
+    /// Provider 名称，默认为 ACE OLE DB 16.0（功能最完整）。
+    /// 可选值：
+    /// - AccessProviderNames.AceOleDb16 (Microsoft.ACE.OLEDB.16.0) - 推荐，需要 Office 2016+
+    /// - AccessProviderNames.AceOleDb12 (Microsoft.ACE.OLEDB.12.0) - 需要 Office 2010+，不支持 Connect Timeout
+    /// - AccessProviderNames.JetOleDb4 (Microsoft.Jet.OLEDB.4.0) - 仅支持 32 位和旧版 Access
+    /// </summary>
+    public string ProviderName { get; set; } = AccessProviderNames.AceOleDb16;
+
+    /// <summary>
+    /// 连接超时时间（秒），默认 15 秒。
+    /// </summary>
+    public int ConnectionTimeout { get; set; } = 15;
+
+    /// <summary>
+    /// 最大重试次数，默认 3 次。用于增强稳健性。
+    /// </summary>
+    public int MaxRetryCount { get; set; } = 3;
+
+    /// <summary>
+    /// 重试延迟（毫秒），默认 100 毫秒。
+    /// </summary>
+    public int RetryDelayMilliseconds { get; set; } = 100;
+
+    /// <summary>
+    /// 额外的 OLE DB 参数，按需添加。
+    /// </summary>
+    public IDictionary<string, string> AdditionalParameters { get; } =
+        new Dictionary<string, string>(StringComparer.OrdinalIgnoreCase);
+
+    internal void Validate()
+    {
+        if (string.IsNullOrWhiteSpace(ConnectionString) &&
+            ConnectionStringFactory is null &&
+            string.IsNullOrWhiteSpace(DatabaseFile) &&
+            DatabaseFileFactory is null)
+        {
+            throw new InvalidOperationException(
+                "AccessDatabaseOptions 需要连接字符串或数据库文件路径。");
+        }
+
+        if (string.IsNullOrWhiteSpace(ProviderName))
+        {
+            throw new InvalidOperationException("必须指定 Access Provider。");
+        }
+
+        if (ConnectionTimeout <= 0)
+        {
+            throw new InvalidOperationException("ConnectionTimeout 必须大于 0。");
+        }
+
+        if (MaxRetryCount < 0)
+        {
+            throw new InvalidOperationException("MaxRetryCount 不能小于 0。");
+        }
+
+        if (RetryDelayMilliseconds < 0)
+        {
+            throw new InvalidOperationException("RetryDelayMilliseconds 不能小于 0。");
+        }
+    }
+}

src/Sharp/Data.Access/Options/AccessProviderNames.cs

@@ -0,0 +1,22 @@
+namespace Sharp.Data.Access.Options;
+
+/// <summary>
+/// 常用 Access 数据库 Provider 名称。
+/// </summary>
+public static class AccessProviderNames
+{
+    /// <summary>
+    /// Microsoft Access Database Engine 2016 (推荐)。
+    /// </summary>
+    public const string AceOleDb16 = "Microsoft.ACE.OLEDB.16.0";
+
+    /// <summary>
+    /// Microsoft Access Database Engine 2010。
+    /// </summary>
+    public const string AceOleDb12 = "Microsoft.ACE.OLEDB.12.0";
+
+    /// <summary>
+    /// 老旧的 Jet 4.0 Provider（仅限 32 位进程）。
+    /// </summary>
+    public const string JetOleDb4 = "Microsoft.Jet.OLEDB.4.0";
+}

src/Sharp/Data.Access/README-简化API.md

@@ -0,0 +1,374 @@
+# AccessDataService 简化 API 使用指南
+
+## 🎯 设计目标
+
+Data.Access 模块的核心目标是**让调用者使用起来更简单**，将连接管理、SQL 执行、参数处理、事务管理等复杂度封装起来。
+
+## 📊 代码对比
+
+### ❌ 之前：直接使用 OleDb（复杂）
+
+```csharp
+// 每次都要手动创建连接
+private OleDbConnection CreateConnection()
+{
+    var dbPath = Path.GetFullPath("dbDwDmsSetup.accdb");
+    var connectionString = $"Provider=Microsoft.ACE.OLEDB.12.0;Data Source={dbPath}";
+    return new OleDbConnection(connectionString);
+}
+
+// 查询用户 - 需要写大量样板代码
+private async Task<List<UserInfoDto>> LoadUsersAsync()
+{
+    using var connection = CreateConnection();
+    await connection.OpenAsync();
+
+    using var command = new OleDbCommand("SELECT UserName, Password FROM UserInfo", connection);
+    using var reader = await Task.Run(() => command.ExecuteReader());
+
+    var users = new List<UserInfoDto>();
+    while (await Task.Run(() => reader.Read()))
+    {
+        var user = new UserInfoDto
+        {
+            UserName = reader["UserName"]?.ToString() ?? "",
+            Password = reader["Password"]?.ToString() ?? ""
+        };
+        users.Add(user);
+    }
+
+    return users;
+}
+
+// 删除用户 - 需要手动管理事务
+private async Task DeleteUserAsync(string userName)
+{
+    using var connection = CreateConnection();
+    await connection.OpenAsync();
+    using var transaction = connection.BeginTransaction();
+
+    try
+    {
+        using (var deletePermCmd = new OleDbCommand(
+            "DELETE FROM UserPermission WHERE UserInfo_UserName = ?", connection, transaction))
+        {
+            deletePermCmd.Parameters.AddWithValue("@UserName", userName);
+            await Task.Run(() => deletePermCmd.ExecuteNonQuery());
+        }
+
+        using (var deleteUserCmd = new OleDbCommand(
+            "DELETE FROM UserInfo WHERE UserName = ?", connection, transaction))
+        {
+            deleteUserCmd.Parameters.AddWithValue("@UserName", userName);
+            await Task.Run(() => deleteUserCmd.ExecuteNonQuery());
+        }
+
+        transaction.Commit();
+    }
+    catch
+    {
+        transaction.Rollback();
+        throw;
+    }
+}
+```
+
+**问题**：
+- 大量重复的连接管理代码
+- 手动映射查询结果到对象
+- 手动管理事务的提交和回滚
+- 代码冗长，不易维护
+
+---
+
+### ✅ 现在：使用 AccessDataService（简洁）
+
+```csharp
+// 注入服务，无需手动创建连接
+private readonly IAccessDataService _accessDataService;
+
+// 查询用户 - 一行代码！自动映射！
+private async Task<List<UserInfoDto>> LoadUsersAsync()
+{
+    return await _accessDataService.QueryAsync<UserInfoDto>(
+        "SELECT UserName, [Password] FROM UserInfo");
+}
+
+// 删除用户 - 自动管理事务！
+private async Task DeleteUserAsync(string userName)
+{
+    await _accessDataService.ExecuteInTransactionAsync(async transaction =>
+    {
+        await transaction.ExecuteAsync(
+            "DELETE FROM UserPermission WHERE UserInfo_UserName = ?",
+            new OleDbParameter("@UserName", userName));
+
+        await transaction.ExecuteAsync(
+            "DELETE FROM UserInfo WHERE UserName = ?",
+            new OleDbParameter("@UserName", userName));
+    });
+}
+```
+
+**优势**：
+- ✅ 无需手动管理连接
+- ✅ 自动泛型映射查询结果
+- ✅ 自动管理事务（提交/回滚）
+- ✅ 代码简洁，易于维护
+- ✅ 从 60+ 行减少到 10 行左右
+
+---
+
+## 🚀 快速开始
+
+### 1. 初始化服务
+
+在 `App.xaml.cs` 中初始化：
+
+```csharp
+private void InitializeAccessDataService()
+{
+    var databasePath = Path.GetFullPath("dbDwDmsSetup.accdb");
+    var options = new AccessDataServiceOptions
+    {
+        DatabasePath = databasePath
+    };
+
+    AccessDataService = new AccessDataService(options, LoggerFactory.CreateLogger<AccessDataService>());
+}
+```
+
+### 2. 在窗口中使用
+
+```csharp
+public partial class AccessDatabaseWindowOleDb : Window
+{
+    private readonly IAccessDataService _accessDataService;
+
+    public AccessDatabaseWindowOleDb()
+    {
+        InitializeComponent();
+
+        var app = (App)Application.Current;
+        _accessDataService = app.AccessDataService;
+    }
+}
+```
+
+---
+
+## 📚 API 使用示例
+
+### 1. 查询多条记录
+
+```csharp
+// 自动映射到对象
+var users = await _accessDataService.QueryAsync<UserInfoDto>(
+    "SELECT UserName, [Password] FROM UserInfo");
+
+// 带参数的查询
+var users = await _accessDataService.QueryAsync<UserInfoDto>(
+    "SELECT UserName, [Password] FROM UserInfo WHERE UserName LIKE ?",
+    new OleDbParameter("@Pattern", "%admin%"));
+```
+
+### 2. 查询单条记录
+
+```csharp
+var user = await _accessDataService.QueryFirstOrDefaultAsync<UserInfoDto>(
+    "SELECT UserName, [Password] FROM UserInfo WHERE UserName = ?",
+    new OleDbParameter("@UserName", "admin"));
+
+if (user != null)
+{
+    Console.WriteLine($"找到用户: {user.UserName}");
+}
+```
+
+### 3. 执行标量查询
+
+```csharp
+// 查询数量
+var count = await _accessDataService.ExecuteScalarAsync(
+    "SELECT COUNT(*) FROM UserInfo WHERE UserName = ?",
+    new OleDbParameter("@UserName", "admin"));
+
+int userCount = Convert.ToInt32(count);
+```
+
+### 4. 插入数据
+
+```csharp
+var rowsAffected = await _accessDataService.ExecuteAsync(
+    "INSERT INTO UserInfo (UserName, [Password]) VALUES (?, ?)",
+    new OleDbParameter("@UserName", "newuser"),
+    new OleDbParameter("@Password", "password123"));
+
+Console.WriteLine($"插入了 {rowsAffected} 行");
+```
+
+### 5. 更新数据
+
+```csharp
+var rowsAffected = await _accessDataService.ExecuteAsync(
+    "UPDATE UserInfo SET [Password] = ? WHERE UserName = ?",
+    new OleDbParameter("@Password", "newpassword"),
+    new OleDbParameter("@UserName", "admin"));
+
+Console.WriteLine($"更新了 {rowsAffected} 行");
+```
+
+### 6. 删除数据
+
+```csharp
+var rowsAffected = await _accessDataService.ExecuteAsync(
+    "DELETE FROM UserInfo WHERE UserName = ?",
+    new OleDbParameter("@UserName", "testuser"));
+
+Console.WriteLine($"删除了 {rowsAffected} 行");
+```
+
+### 7. 使用事务（自动提交/回滚）
+
+```csharp
+// 推荐：使用 ExecuteInTransactionAsync（自动管理）
+await _accessDataService.ExecuteInTransactionAsync(async transaction =>
+{
+    // 删除权限
+    await transaction.ExecuteAsync(
+        "DELETE FROM UserPermission WHERE UserInfo_UserName = ?",
+        new OleDbParameter("@UserName", userName));
+
+    // 删除用户
+    await transaction.ExecuteAsync(
+        "DELETE FROM UserInfo WHERE UserName = ?",
+        new OleDbParameter("@UserName", userName));
+
+    // 自动提交！如果有异常，自动回滚！
+});
+```
+
+### 8. 手动管理事务
+
+```csharp
+// 如果需要手动控制
+using var transaction = _accessDataService.BeginTransaction();
+try
+{
+    await transaction.ExecuteAsync("INSERT INTO ...", ...);
+    await transaction.ExecuteAsync("UPDATE ...", ...);
+
+    transaction.Commit();  // 手动提交
+}
+catch
+{
+    transaction.Rollback();  // 手动回滚
+    throw;
+}
+```
+
+### 9. 测试连接
+
+```csharp
+var success = await _accessDataService.TestConnectionAsync();
+if (success)
+{
+    Console.WriteLine("数据库连接成功!");
+}
+```
+
+---
+
+## 🎨 完整示例
+
+```csharp
+public class UserService
+{
+    private readonly IAccessDataService _accessDataService;
+
+    public UserService(IAccessDataService accessDataService)
+    {
+        _accessDataService = accessDataService;
+    }
+
+    // 获取所有用户
+    public async Task<List<UserInfoDto>> GetAllUsersAsync()
+    {
+        return await _accessDataService.QueryAsync<UserInfoDto>(
+            "SELECT UserName, [Password] FROM UserInfo");
+    }
+
+    // 获取用户权限数量
+    public async Task<int> GetUserPermissionCountAsync(string userName)
+    {
+        var count = await _accessDataService.ExecuteScalarAsync(
+            "SELECT COUNT(*) FROM UserPermission WHERE UserInfo_UserName = ?",
+            new OleDbParameter("@UserName", userName));
+
+        return Convert.ToInt32(count);
+    }
+
+    // 添加用户
+    public async Task<bool> AddUserAsync(string userName, string password)
+    {
+        // 检查是否已存在
+        var exists = await _accessDataService.ExecuteScalarAsync(
+            "SELECT COUNT(*) FROM UserInfo WHERE UserName = ?",
+            new OleDbParameter("@UserName", userName));
+
+        if (Convert.ToInt32(exists) > 0)
+            return false;
+
+        // 插入用户
+        await _accessDataService.ExecuteAsync(
+            "INSERT INTO UserInfo (UserName, [Password]) VALUES (?, ?)",
+            new OleDbParameter("@UserName", userName),
+            new OleDbParameter("@Password", password));
+
+        return true;
+    }
+
+    // 删除用户（包含权限）
+    public async Task DeleteUserAsync(string userName)
+    {
+        await _accessDataService.ExecuteInTransactionAsync(async transaction =>
+        {
+            // 先删除权限
+            await transaction.ExecuteAsync(
+                "DELETE FROM UserPermission WHERE UserInfo_UserName = ?",
+                new OleDbParameter("@UserName", userName));
+
+            // 再删除用户
+            await transaction.ExecuteAsync(
+                "DELETE FROM UserInfo WHERE UserName = ?",
+                new OleDbParameter("@UserName", userName));
+        });
+    }
+}
+```
+
+---
+
+## 💡 核心优势总结
+
+| 特性 | 直接使用 OleDb | 使用 AccessDataService |
+|------|---------------|----------------------|
+| 连接管理 | 手动创建、打开、释放 | ✅ 自动管理 |
+| 结果映射 | 手动读取 DataReader | ✅ 自动泛型映射 |
+| 事务管理 | 手动 BeginTransaction/Commit/Rollback | ✅ 自动管理 |
+| 代码量 | 60+ 行 | ✅ 10 行左右 |
+| 可维护性 | 低（大量重复代码） | ✅ 高 |
+| 易用性 | 低（需要理解 ADO.NET） | ✅ 高 |
+
+---
+
+## 📖 参考文件
+
+- **核心实现**: `Data.Access/AccessDataService.cs`
+- **接口定义**: `Data.Access/IAccessDataService.cs`
+- **配置选项**: `Data.Access/AccessDataServiceOptions.cs`
+- **使用示例**: `Server/Views/AccessDatabaseWindowOleDb.xaml.cs`
+
+---
+
+**总结**：Data.Access 模块通过封装 OleDb 的复杂度，提供了简洁优雅的 API，让调用者可以用更少的代码完成相同的功能！

src/Sharp/Data.Access/README.md

@@ -0,0 +1,115 @@
+# Sharp.Data.Access
+
+基于 EF Core + Access (Jet) 的数据库基础设施。遵循 “依赖大于配置” 的理念，提供易于集成的连接串构建、密码解密、数据库初始化以及依赖注入支持，让其他项目只专注于提供配置即可。
+
+> **定位**：仅提供 Access 数据层能力（连接、仓储、上下文构建），不含任何业务逻辑。
+
+## 特性
+
+- ✅ **DI 集成** – 一行 `AddAccessDataContext<TContext>()` 注册，其他模块通过构造函数获取 `IDataContext`。
+- ✅ **最小配置** – 只需要提供数据库文件或连接字符串即可完成集成。
+- ✅ **密码解密** – 内置 `IAccessPasswordDecryptor`，可注入自定义实现来解密加密密码。
+- ✅ **数据库初始化** – 自动创建目录、可选基于模板复制空库文件，避免运行期错误。
+- ✅ **灵活扩展** – 支持通过委托访问 `IServiceProvider`，从任意配置中心或密钥管理系统读取参数。
+
+## 快速开始
+
+```csharp
+using Microsoft.Extensions.DependencyInjection;
+using Sharp.Data.Access.DependencyInjection;
+using Sharp.Data.Context;
+
+builder.Services.AddAccessDataContext<AppDbContext>(options =>
+{
+    options.Database.DatabaseFile = "data/app.accdb";
+    options.Database.EncryptedPassword = configuration["Access:EncryptedPassword"];
+    // 配置 Data 模块能力
+    options.ConfigureDataContext = (sp, ctx) =>
+    {
+        ctx.UseAudit()
+           .UseSoftDelete()
+           .UseCurrentUserProvider(() => sp.GetService<ICurrentUser>()?.Id);
+    };
+});
+```
+
+随后只需要注入 `IDataContext` 或 `IAccessDataContextFactory<AppDbContext>` 即可使用：
+
+```csharp
+public class UserService
+{
+    private readonly IDataContext _db;
+
+    public UserService(IDataContext db) => _db = db;
+
+    public Task<List<User>> GetUsersAsync() => _db.Repository<User>().GetAllAsync();
+}
+```
+
+## 依赖注入示例（带模板/密码）
+
+```csharp
+var services = new ServiceCollection();
+
+services.AddSingleton<ISecretProvider, SecretProvider>(); // 自定义的密钥服务
+
+services.AddAccessDataContext<AppDbContext>(options =>
+{
+    options.Database.DatabaseFile = "data/app.accdb";
+    options.Database.TemplateFile = "data/template.accdb";
+    options.Database.CopyTemplateWhenMissing = true;
+    options.Database.EncryptedPasswordFactory = sp =>
+        sp.GetRequiredService<ISecretProvider>().Get("AccessDbPassword");
+
+    options.ConfigureDataContext = (sp, ctx) =>
+    {
+        ctx.UseAudit()
+           .UseSoftDelete()
+           .UseCurrentUserProvider(() => sp.GetRequiredService<ICurrentUserAccessor>().Id);
+    };
+});
+
+await using var provider = services.BuildServiceProvider();
+var factory = provider.GetRequiredService<IAccessDataContextFactory<AppDbContext>>();
+await using var dataContext = factory.Create();
+```
+
+> 在实际业务项目中可以把 `IAccessDataContextFactory<TContext>` 注入到需要“短生命周期”数据库连接的服务中，或直接注入 `IDataContext`（作用域作用域内共享同一实例）。
+
+## 处理加密密码
+
+实现 `IAccessPasswordDecryptor` 并注册到 DI：
+
+```csharp
+builder.Services.AddSingleton<IAccessPasswordDecryptor, AesPasswordDecryptor>();
+```
+
+`AccessDatabaseOptions.EncryptedPassword` 会在构建连接字符串前自动调用该服务完成解密，也可以直接提供明文 `Password`。
+
+## 模板与初始化
+
+- `CopyTemplateWhenMissing = true`（默认）时，如果指定了 `TemplateFile`，将在首次运行时复制模板数据库。
+- `ThrowIfMissing = true` 可在缺少数据库文件时立即抛出异常，便于早期发现部署问题。
+- 所有路径都支持相对路径（基于 `AppContext.BaseDirectory`），也可以通过 `DataDirectoryFactory` 自定义。
+
+## 手动使用（无依赖注入）
+
+```csharp
+var builder = new DataContextBuilder<AppDbContext>();
+builder.UseAccessDatabase(options =>
+{
+    options.DatabaseFile = "data/app.accdb";
+    options.Password = "secret";
+});
+
+var db = builder.Build();
+```
+
+## 可扩展点
+
+- `IAccessPasswordDecryptor`：自定义密码加解密。
+- `IAccessConnectionStringFactory`：自定义连接串构建逻辑。
+- `IAccessDatabaseInitializer`：自定义数据库初始化策略（检查锁、备份等）。
+- `AccessContextOptions.ConfigureDataContext`：复用 Data 模块的审计、软删除、自动迁移等能力。
+
+通过这些基础设施，Access 支持可在任何项目中复用，同时保持代码简洁、低耦合。

src/Sharp/Data.Access/Security/IAccessPasswordDecryptor.cs

@@ -0,0 +1,14 @@
+namespace Sharp.Data.Access.Security;
+
+/// <summary>
+/// Access 密码解密接口，调用方可替换以实现自定义加解密策略。
+/// </summary>
+public interface IAccessPasswordDecryptor
+{
+    /// <summary>
+    /// 解密 Access 数据库密码。
+    /// </summary>
+    /// <param name="encryptedPassword">加密后的密码。</param>
+    /// <returns>返回明文密码，如果无法解密则返回 null。</returns>
+    string? Decrypt(string? encryptedPassword);
+}

src/Sharp/Data.Access/Security/PassthroughAccessPasswordDecryptor.cs

@@ -0,0 +1,9 @@
+namespace Sharp.Data.Access.Security;
+
+/// <summary>
+/// 默认的密码解密器，直接返回原始值。
+/// </summary>
+public sealed class PassthroughAccessPasswordDecryptor : IAccessPasswordDecryptor
+{
+    public string? Decrypt(string? encryptedPassword) => encryptedPassword;
+}

src/Sharp/NetServer/Server/HttpServer.cs

@@ -294,9 +294,20 @@ public class HttpServer
             var controller = _serviceProvider.GetService(controllerType);
             if (controller != null)
                 return controller;
+
+            // 使用 ActivatorUtilities 创建实例（可以解析构造函数参数）
+            try
+            {
+                return ActivatorUtilities.CreateInstance(_serviceProvider, controllerType);
+            }
+            catch (Exception ex)
+            {
+                _logger?.LogError(ex, "Failed to create controller {ControllerType} with DI", controllerType.Name);
+                throw;
+            }
         }
 
-        // 使用激活器创建
+        // 没有 DI 容器时，使用默认激活器创建（需要无参构造）
         return Activator.CreateInstance(controllerType)!;
     }
 

src/Sharp/Plc.Siemens/DependencyInjection/ServiceCollectionExtensions.cs

@@ -1,24 +0,0 @@
-using Microsoft.Extensions.DependencyInjection;
-using Plc.Abstractions;
-using Plc.Services;
-using Plc.Siemens;
-using Plc.Siemens.Options;
-
-namespace Plc.Siemens.DependencyInjection;
-
-public static class ServiceCollectionExtensions
-{
-    public static IServiceCollection AddSiemensPlc(this IServiceCollection services, Action<SiemensPlcOptions> configureOptions)
-    {
-        var options = new SiemensPlcOptions();
-        configureOptions(options);
-        
-        services.AddSingleton(options);
-        services.AddSingleton<IPlcDriver, SiemensDriver>();
-        services.AddSingleton<IPlcOptimizer, SiemensOptimizer>();
-        services.AddSingleton<IDataConverter, BigEndianConverter>();
-        services.AddSingleton<IPlcService, PlcMonitorService>();
-        
-        return services;
-    }
-}

src/Sharp/Plc.Siemens/Models/SiemensAddress.cs

@@ -1,25 +0,0 @@
-namespace Plc.Siemens.Models;
-
-public enum SiemensMemoryArea
-{
-    Inputs = 0x81,
-    Outputs = 0x82,
-    Memory = 0x83,
-    DataBlock = 0x84,
-    Timer = 0x1D,
-    Counter = 0x1C
-}
-
-public class SiemensAddress
-{
-    public SiemensMemoryArea Area { get; set; }
-    public int DbNumber { get; set; } // Only for DataBlock
-    public int ByteOffset { get; set; }
-    public int BitOffset { get; set; }
-    
-    // Helper to sort/group
-    public override string ToString()
-    {
-        return $"{Area}:{DbNumber}:{ByteOffset}.{BitOffset}";
-    }
-}

src/Sharp/Plc.Siemens/Options/SiemensPlcOptions.cs

@@ -1,23 +0,0 @@
-using S7.Net;
-
-namespace Plc.Siemens.Options;
-
-public class SiemensPlcOptions
-{
-    public string IpAddress { get; set; } = "127.0.0.1";
-    public int Port { get; set; } = 102;
-    public short Rack { get; set; } = 0;
-    public short Slot { get; set; } = 1;
-    
-    /// <summary>
-    /// S7-1200/1500 通常支持 960，S7-300 通常支持 240。
-    /// 默认保守值设为 240。
-    /// </summary>
-    public int PduSize { get; set; } = 240;
-
-    /// <summary>
-    /// CPU 类型 (例如: S71200, S71500, S7300, S7400, S7200, S7200Smart).
-    /// 默认为 S71200。
-    /// </summary>
-    public CpuType CpuType { get; set; } = CpuType.S71200;
-}

src/Sharp/Plc.Siemens/Plc.Siemens.csproj

@@ -1,18 +0,0 @@
-<Project Sdk="Microsoft.NET.Sdk">
-
-  <PropertyGroup>
-    <TargetFramework>net8.0</TargetFramework>
-    <ImplicitUsings>enable</ImplicitUsings>
-    <Nullable>enable</Nullable>
-  </PropertyGroup>
-
-  <ItemGroup>
-    <ProjectReference Include="..\Plc\Plc.csproj" />
-  </ItemGroup>
-
-  <ItemGroup>
-    <PackageReference Include="Microsoft.Extensions.DependencyInjection.Abstractions" Version="10.0.0" />
-    <PackageReference Include="S7netplus" Version="0.20.0" />
-  </ItemGroup>
-
-</Project>

src/Sharp/Plc.Siemens/SiemensDriver.cs

@@ -1,123 +0,0 @@
-using Common.Results;
-using Plc.Abstractions;
-using Plc.Siemens.Models;
-using Plc.Siemens.Options;
-using Plc.Siemens.Utils;
-using S7.Net;
-
-namespace Plc.Siemens;
-
-public class SiemensDriver : IPlcDriver
-{
-    private readonly SiemensPlcOptions _options;
-    private S7.Net.Plc? _plc;
-    private readonly object _lock = new();
-
-    public SiemensDriver(SiemensPlcOptions options)
-    {
-        _options = options;
-    }
-
-    public bool IsConnected => _plc?.IsConnected ?? false;
-
-    public int MaxPduSize => _options.PduSize;
-
-    public async Task<Result> ConnectAsync(CancellationToken cancellationToken = default)
-    {
-        try
-        {
-            // Close existing connection if any
-            if (_plc != null)
-            {
-                _plc.Close();
-                _plc = null;
-            }
-
-            // Create new instance with latest options
-            _plc = new S7.Net.Plc(_options.CpuType, _options.IpAddress, _options.Port, _options.Rack, _options.Slot);
-
-            await _plc.OpenAsync(cancellationToken);
-            
-            if (_plc.IsConnected)
-                return Result.Success();
-            
-            return Result.Failure("Failed to connect to PLC (IsConnected is false).");
-        }
-        catch (Exception ex)
-        {
-            return Result.Failure(ex.Message);
-        }
-    }
-
-    public async Task<Result> DisconnectAsync()
-    {
-        try
-        {
-            _plc?.Close();
-            return await Task.FromResult(Result.Success());
-        }
-        catch (Exception ex)
-        {
-            return Result.Failure(ex.Message);
-        }
-    }
-
-    public async Task<Result<byte[]>> ReadBytesAsync(string address, ushort length, CancellationToken cancellationToken = default)
-    {
-        if (!IsConnected || _plc == null)
-            return Result.Failure<byte[]>("PLC 未连接。");
-
-        try
-        {
-            var siemensAddr = SiemensAddressParser.Parse(address);
-            var dataType = MapToS7DataType(siemensAddr.Area);
-            
-            var bytes = await _plc.ReadBytesAsync(dataType, siemensAddr.DbNumber, siemensAddr.ByteOffset, length, cancellationToken);
-            
-            return Result.Success(bytes);
-        }
-        catch (Exception ex)
-        {
-            return Result.Failure<byte[]>($"Read failed: {ex.Message}");
-        }
-    }
-
-    public async Task<Result> WriteBytesAsync(string address, byte[] data, CancellationToken cancellationToken = default)
-    {
-        if (!IsConnected || _plc == null)
-            return Result.Failure("PLC 未连接。");
-
-        try
-        {
-            var siemensAddr = SiemensAddressParser.Parse(address);
-            var dataType = MapToS7DataType(siemensAddr.Area);
-
-            await _plc.WriteBytesAsync(dataType, siemensAddr.DbNumber, siemensAddr.ByteOffset, data, cancellationToken);
-            
-            return Result.Success();
-        }
-        catch (Exception ex)
-        {
-            return Result.Failure($"Write failed: {ex.Message}");
-        }
-    }
-
-    private DataType MapToS7DataType(SiemensMemoryArea area)
-    {
-        return area switch
-        {
-            SiemensMemoryArea.DataBlock => DataType.DataBlock,
-            SiemensMemoryArea.Memory => DataType.Memory,
-            SiemensMemoryArea.Inputs => DataType.Input,
-            SiemensMemoryArea.Outputs => DataType.Output,
-            SiemensMemoryArea.Timer => DataType.Timer,
-            SiemensMemoryArea.Counter => DataType.Counter,
-            _ => throw new ArgumentOutOfRangeException(nameof(area), area, null)
-        };
-    }
-
-    public void Dispose()
-    {
-        _plc?.Close();
-    }
-}

src/Sharp/Plc.Siemens/SiemensOptimizer.cs

@@ -1,107 +0,0 @@
-using Plc.Abstractions;
-using Plc.Models;
-using Plc.Siemens.Models;
-using Plc.Siemens.Utils;
-using Plc.Utils;
-
-namespace Plc.Siemens;
-
-public class SiemensOptimizer : IPlcOptimizer
-{
-    // 允许变量之间合并为一次读取的最大间隔字节数
-    private const int MaxGapBytes = 20;
-
-    public List<PlcReadBatch> Optimize(IEnumerable<PlcTag> tags, int maxPduSize)
-    {
-        var batches = new List<PlcReadBatch>();
-
-        // 1. 准备标签（解析地址）
-        var validTags = new List<PlcTag>();
-        foreach (var tag in tags)
-        {
-            if (tag.ParsedAddress == null)
-            {
-                try
-                {
-                    tag.ParsedAddress = SiemensAddressParser.Parse(tag.Address);
-                }
-                catch
-                {
-                    // 记录错误？暂时跳过。
-                    continue;
-                }
-            }
-            validTags.Add(tag);
-        }
-
-        // 2. 按区域和 DB 号分组（物理位置）
-        var groups = validTags.GroupBy(t =>
-        {
-            var addr = (SiemensAddress)t.ParsedAddress!;
-            return new { addr.Area, addr.DbNumber };
-        });
-
-        foreach (var group in groups)
-        {
-            // 3. 按字节偏移量排序
-            var sortedTags = group.OrderBy(t => ((SiemensAddress)t.ParsedAddress!).ByteOffset).ToList();
-
-            PlcReadBatch? currentBatch = null;
-
-            foreach (var tag in sortedTags)
-            {
-                var addr = (SiemensAddress)tag.ParsedAddress!;
-                int typeSize = TypeHelper.GetSize(tag.DataType);
-                int byteLength = typeSize * tag.Length; // 此标签的总字节数
-                
-                // 如果是 bool，它可能在一个字节内，但我们在检查边界时假设它占用该字节
-
-                if (currentBatch == null)
-                {
-                    currentBatch = CreateBatch(tag, addr, byteLength);
-                    batches.Add(currentBatch);
-                    continue;
-                }
-
-                var batchStartAddr = (SiemensAddress)currentBatch.ParsedStartAddress!;
-                int currentBatchEnd = batchStartAddr.ByteOffset + currentBatch.TotalLength;
-
-                // 计算间隔 (Gap)
-                int gap = addr.ByteOffset - currentBatchEnd;
-
-                // 计算潜在的新长度
-                // 新标签地址 + 其长度 - 批次起始位置
-                int newTotalLength = (addr.ByteOffset + byteLength) - batchStartAddr.ByteOffset;
-
-                // 合并条件：
-                // 1. 标签在当前结束之后（或位置相同）开始（因为已排序，所以是肯定的）
-                // 2. 间隔足够小
-                // 3. 总大小适合 PDU
-                if (gap >= 0 && gap <= MaxGapBytes && newTotalLength <= maxPduSize)
-                {
-                    currentBatch.Tags.Add(tag);
-                    currentBatch.TotalLength = newTotalLength;
-                }
-                else
-                {
-                    // 开启新批次
-                    currentBatch = CreateBatch(tag, addr, byteLength);
-                    batches.Add(currentBatch);
-                }
-            }
-        }
-
-        return batches;
-    }
-
-    private PlcReadBatch CreateBatch(PlcTag tag, SiemensAddress addr, int byteLength)
-    {
-        return new PlcReadBatch
-        {
-            StartAddress = tag.Address,
-            ParsedStartAddress = addr,
-            TotalLength = byteLength,
-            Tags = new List<PlcTag> { tag }
-        };
-    }
-}

src/Sharp/Plc.Siemens/Utils/SiemensAddressParser.cs

@@ -1,84 +0,0 @@
-using Plc.Siemens.Models;
-using System.Text.RegularExpressions;
-
-namespace Plc.Siemens.Utils;
-
-public static class SiemensAddressParser
-{
-    // DB匹配: DB1.DBB0, DB1.DBW2, DB1.DBD4, DB1.DBX0.0
-    // Group 1: DbNumber
-    // Group 2: Type (B,W,D,X) - Ignored
-    // Group 3: ByteOffset
-    // Group 5: BitOffset (Optional)
-    private static readonly Regex DbRegex = new(@"^DB(\d+)\.DB[B|W|D|X]?(\d+)(\.(\d+))?$", RegexOptions.IgnoreCase);
-    
-    // M匹配: M100, MB100, MW100, MD100, MX100.0, M100.1
-    // Group 1: ByteOffset
-    // Group 3: BitOffset (Optional)
-    private static readonly Regex MRegex = new(@"^M[B|W|D|X]?(\d+)(\.(\d+))?$", RegexOptions.IgnoreCase);
-
-    // I匹配: I0.0, IB0, IW0, ID0
-    private static readonly Regex IRegex = new(@"^I[B|W|D|X]?(\d+)(\.(\d+))?$", RegexOptions.IgnoreCase);
-
-    // Q匹配: Q0.0, QB0, QW0, QD0
-    private static readonly Regex QRegex = new(@"^Q[B|W|D|X]?(\d+)(\.(\d+))?$", RegexOptions.IgnoreCase);
-
-    public static SiemensAddress Parse(string address)
-    {
-        address = address.Trim().ToUpper();
-
-        // 1. Try DB
-        var dbMatch = DbRegex.Match(address);
-        if (dbMatch.Success)
-        {
-            return new SiemensAddress
-            {
-                Area = SiemensMemoryArea.DataBlock,
-                DbNumber = int.Parse(dbMatch.Groups[1].Value),
-                ByteOffset = int.Parse(dbMatch.Groups[2].Value),
-                BitOffset = dbMatch.Groups[4].Success ? int.Parse(dbMatch.Groups[4].Value) : 0
-            };
-        }
-        
-        // 2. Try M (Memory/Flags)
-        var mMatch = MRegex.Match(address);
-        if (mMatch.Success)
-        {
-            return new SiemensAddress
-            {
-                Area = SiemensMemoryArea.Memory,
-                DbNumber = 0,
-                ByteOffset = int.Parse(mMatch.Groups[1].Value),
-                BitOffset = mMatch.Groups[3].Success ? int.Parse(mMatch.Groups[3].Value) : 0
-            };
-        }
-
-        // 3. Try I (Inputs)
-        var iMatch = IRegex.Match(address);
-        if (iMatch.Success)
-        {
-            return new SiemensAddress
-            {
-                Area = SiemensMemoryArea.Inputs,
-                DbNumber = 0,
-                ByteOffset = int.Parse(iMatch.Groups[1].Value),
-                BitOffset = iMatch.Groups[3].Success ? int.Parse(iMatch.Groups[3].Value) : 0
-            };
-        }
-
-        // 4. Try Q (Outputs)
-        var qMatch = QRegex.Match(address);
-        if (qMatch.Success)
-        {
-            return new SiemensAddress
-            {
-                Area = SiemensMemoryArea.Outputs,
-                DbNumber = 0,
-                ByteOffset = int.Parse(qMatch.Groups[1].Value),
-                BitOffset = qMatch.Groups[3].Success ? int.Parse(qMatch.Groups[3].Value) : 0
-            };
-        }
-        
-        throw new ArgumentException($"不支持或无效的地址格式: {address}");
-    }
-}

src/Sharp/Plc/Abstractions/IDataConverter.cs

@@ -1,10 +0,0 @@
-namespace Plc.Abstractions;
-
-public interface IDataConverter
-{
-    // 将原始字节（从指定偏移量开始）转换为目标类型
-    object? Parse(byte[] buffer, int offset, Type type, int length);
-    
-    // 将值转换为字节
-    byte[] ToBytes(object value, Type type, int length);
-}

src/Sharp/Plc/Abstractions/IPlcDriver.cs

@@ -1,45 +0,0 @@
-using Common.Results;
-
-namespace Plc.Abstractions;
-
-/// <summary>
-/// 定义 PLC 驱动的底层契约。
-/// 此接口的实现处理具体的协议细节（例如：S7, Modbus）。
-/// </summary>
-public interface IPlcDriver : IDisposable
-{
-    /// <summary>
-    /// 获取一个值，指示驱动程序当前是否已连接到 PLC。
-    /// </summary>
-    bool IsConnected { get; }
-
-    /// <summary>
-    /// 获取连接支持的最大 PDU（协议数据单元）大小。
-    /// 优化器使用此值来确定最大批量大小。
-    /// </summary>
-    int MaxPduSize { get; }
-
-    /// <summary>
-    /// 建立与 PLC 的连接。
-    /// </summary>
-    Task<Result> ConnectAsync(CancellationToken cancellationToken = default);
-
-    /// <summary>
-    /// 关闭与 PLC 的连接。
-    /// </summary>
-    Task<Result> DisconnectAsync();
-
-    /// <summary>
-    /// 从指定地址读取原始字节序列。
-    /// </summary>
-    /// <param name="address">起始地址字符串（例如 "DB1.0"）。</param>
-    /// <param name="length">要读取的字节数。</param>
-    Task<Result<byte[]>> ReadBytesAsync(string address, ushort length, CancellationToken cancellationToken = default);
-
-    /// <summary>
-    /// 将原始字节序列写入指定地址。
-    /// </summary>
-    /// <param name="address">起始地址字符串。</param>
-    /// <param name="data">要写入的字节。</param>
-    Task<Result> WriteBytesAsync(string address, byte[] data, CancellationToken cancellationToken = default);
-}

src/Sharp/Plc/Abstractions/IPlcOptimizer.cs

@@ -1,43 +0,0 @@
-using Plc.Models;
-
-namespace Plc.Abstractions;
-
-/// <summary>
-/// 负责分析请求的标签列表，并将它们分组为优化的批量请求。
-/// </summary>
-public interface IPlcOptimizer
-{
-    /// <summary>
-    /// 基于地址位置和 PDU 大小，将单个标签分组为高效的读取批次。
-    /// </summary>
-    /// <param name="tags">活动订阅列表。</param>
-    /// <param name="maxPduSize">单次请求中可读取的最大字节数。</param>
-    /// <returns>批量请求列表。</returns>
-    List<PlcReadBatch> Optimize(IEnumerable<PlcTag> tags, int maxPduSize);
-}
-
-/// <summary>
-/// 表示覆盖多个标签的单个优化读取操作。
-/// </summary>
-public class PlcReadBatch
-{
-    /// <summary>
-    /// 此批量读取的起始地址。
-    /// </summary>
-    public string StartAddress { get; set; } = string.Empty;
-
-    /// <summary>
-    /// 要读取的总字节数。
-    /// </summary>
-    public int TotalLength { get; set; }
-
-    /// <summary>
-    /// 包含在此批量范围内的标签列表。
-    /// </summary>
-    public List<PlcTag> Tags { get; set; } = new();
-    
-    /// <summary>
-    /// 驱动程序特定的起始地址上下文（避免重新解析）。
-    /// </summary>
-    public object? ParsedStartAddress { get; set; }
-}

src/Sharp/Plc/Abstractions/IPlcService.cs

@@ -1,41 +0,0 @@
-using Common.Results;
-using Plc.Models;
-
-namespace Plc.Abstractions;
-
-/// <summary>
-/// 用于与 PLC 交互的高层服务。
-/// 处理连接管理、批量读取和数据转换。
-/// </summary>
-public interface IPlcService
-{
-    /// <summary>
-    /// 启动后台监控循环。
-    /// </summary>
-    Task StartAsync(CancellationToken cancellationToken = default);
-
-    /// <summary>
-    /// 停止后台监控循环。
-    /// </summary>
-    Task StopAsync();
-
-    /// <summary>
-    /// 对单个地址执行立即、临时的读取。
-    /// </summary>
-    Task<Result<T>> ReadAsync<T>(string address);
-
-    /// <summary>
-    /// 对单个地址执行立即、临时的写入。
-    /// </summary>
-    Task<Result> WriteAsync<T>(string address, T value);
-
-    /// <summary>
-    /// 订阅一个标签到监控循环。
-    /// </summary>
-    void Subscribe(PlcTag tag);
-
-    /// <summary>
-    /// 从监控循环取消订阅标签。
-    /// </summary>
-    void Unsubscribe(string tagId);
-}

src/Sharp/Plc/Attributes/PlcAddressAttribute.cs

@@ -1,14 +0,0 @@
-namespace Plc.Attributes;
-
-[AttributeUsage(AttributeTargets.Property)]
-public class PlcAddressAttribute : Attribute
-{
-    public string Address { get; }
-    public int Length { get; }
-
-    public PlcAddressAttribute(string address, int length = 1)
-    {
-        Address = address;
-        Length = length;
-    }
-}

src/Sharp/Plc/Models/PlcBrand.cs

@@ -1,9 +0,0 @@
-namespace Plc.Models;
-
-public enum PlcBrand
-{
-    Siemens,
-    Omron,      // 预留
-    Mitsubishi, // 预留
-    ModbusTcp   // 预留
-}

src/Sharp/Plc/Models/PlcTag.cs

@@ -1,44 +0,0 @@
-namespace Plc.Models;
-
-/// <summary>
-/// 表示用户想要监控或访问的 PLC 中的特定数据点。
-/// </summary>
-public class PlcTag
-{
-    /// <summary>
-    /// 此标签订阅的唯一标识符。
-    /// </summary>
-    public string Id { get; set; } = Guid.NewGuid().ToString();
-
-    /// <summary>
-    /// PLC 地址字符串（例如 "DB1.DBW0", "M100.1"）。
-    /// </summary>
-    public required string Address { get; set; }
-
-    /// <summary>
-    /// 此数据表示的 .NET 类型（例如 typeof(int), typeof(float)）。
-    /// </summary>
-    public required Type DataType { get; set; }
-
-    /// <summary>
-    /// 数据长度（主要用于字符串或数组）。默认为 1。
-    /// </summary>
-    public int Length { get; set; } = 1;
-
-    /// <summary>
-    /// 此标签的最后已知值。
-    /// </summary>
-    public object? Value { get; set; }
-
-    /// <summary>
-    /// 当值更改（或刷新）时调用的操作。
-    /// 回调接收 Tag 实例和新值。
-    /// </summary>
-    public Action<PlcTag, object?>? OnChanged { get; set; }
-
-    /// <summary>
-    /// 内部使用：由驱动程序/优化器用于存储解析后的地址对象。
-    /// 这避免了在每个周期重新解析地址字符串。
-    /// </summary>
-    public object? ParsedAddress { get; set; }
-}

src/Sharp/Plc/Plc.csproj

@@ -1,13 +0,0 @@
-<Project Sdk="Microsoft.NET.Sdk">
-
-  <PropertyGroup>
-    <TargetFramework>net8.0</TargetFramework>
-    <ImplicitUsings>enable</ImplicitUsings>
-    <Nullable>enable</Nullable>
-  </PropertyGroup>
-
-  <ItemGroup>
-    <ProjectReference Include="..\Common\Common.csproj" />
-  </ItemGroup>
-
-</Project>

src/Sharp/Plc/Proxy/PlcInterfaceProxy.cs

@@ -1,106 +0,0 @@
-using System.ComponentModel;
-using System.Reflection;
-using Plc.Abstractions;
-using Plc.Attributes;
-using Plc.Models;
-
-namespace Plc.Proxy;
-
-public class PlcInterfaceProxy : DispatchProxy, INotifyPropertyChanged
-{
-    private IPlcService _plcService = null!;
-    private readonly Dictionary<string, PlcTag> _tags = new();
-    
-    // 关键修改：使用私有字段手动管理委托链，避免递归调用
-    private PropertyChangedEventHandler? _propertyChangedInternal;
-
-    // 声明为 virtual event 只是为了骗过编译器的 TypeLoadException，
-    // 但我们在 Invoke 里不操作它，而是操作 _propertyChangedInternal。
-    // 实际上，对于 DispatchProxy 来说，我们并不需要这个 event 真的工作，
-    // 只需要它存在以满足接口签名，并允许被重写。
-    public virtual event PropertyChangedEventHandler? PropertyChanged
-    {
-        add => _propertyChangedInternal += value;
-        remove => _propertyChangedInternal -= value;
-    }
-
-    protected override object? Invoke(MethodInfo? targetMethod, object?[]? args)
-    {
-        if (targetMethod == null) return null;
-
-        // 1. Handle Property Getters (get_PropName)
-        if (targetMethod.Name.StartsWith("get_"))
-        {
-            var propName = targetMethod.Name.Substring(4);
-            if (_tags.TryGetValue(propName, out var tag))
-            {
-                return tag.Value; // Return cached value
-            }
-        }
-
-        // 2. Handle Property Setters (set_PropName)
-        if (targetMethod.Name.StartsWith("set_"))
-        {
-            var propName = targetMethod.Name.Substring(4);
-            if (_tags.TryGetValue(propName, out var tag) && args != null && args.Length > 0)
-            {
-                var newValue = args[0];
-                _plcService.WriteAsync(tag.Address, newValue).GetAwaiter().GetResult(); 
-                return null;
-            }
-        }
-
-        // 3. Handle INotifyPropertyChanged methods (add_PropertyChanged, remove_PropertyChanged)
-        // 这里是关键：我们拦截对 add_PropertyChanged 的调用，
-        // 将其重定向到我们的私有字段 _propertyChangedInternal，
-        // 从而避免调用 this.PropertyChanged += ... 导致的递归。
-        if (targetMethod.Name == "add_PropertyChanged" && args != null && args.Length == 1)
-        {
-            var handler = (PropertyChangedEventHandler)args[0]!;
-            _propertyChangedInternal += handler;
-            return null;
-        }
-        if (targetMethod.Name == "remove_PropertyChanged" && args != null && args.Length == 1)
-        {
-            var handler = (PropertyChangedEventHandler)args[0]!;
-            _propertyChangedInternal -= handler;
-            return null;
-        }
-
-        return null;
-    }
-
-    public static T Create<T>(IPlcService plcService) where T : class, INotifyPropertyChanged
-    {
-        object proxy = Create<T, PlcInterfaceProxy>();
-        ((PlcInterfaceProxy)proxy).Initialize(typeof(T), plcService);
-        return (T)proxy;
-    }
-
-    private void Initialize(Type interfaceType, IPlcService plcService)
-    {
-        _plcService = plcService;
-
-        foreach (var prop in interfaceType.GetProperties())
-        {
-            var attr = prop.GetCustomAttribute<PlcAddressAttribute>();
-            if (attr != null)
-            {
-                var tag = new PlcTag
-                {
-                    Address = attr.Address,
-                    DataType = prop.PropertyType,
-                    Length = attr.Length,
-                    OnChanged = (t, v) =>
-                    {
-                        // 触发时，调用私有字段
-                        _propertyChangedInternal?.Invoke(this, new PropertyChangedEventArgs(prop.Name));
-                    }
-                };
-                
-                _tags[prop.Name] = tag;
-                _plcService.Subscribe(tag);
-            }
-        }
-    }
-}

src/Sharp/Plc/Services/BigEndianConverter.cs

@@ -1,102 +0,0 @@
-using System.Buffers.Binary;
-using Plc.Abstractions;
-
-namespace Plc.Services;
-
-public class BigEndianConverter : IDataConverter
-{
-    public object? Parse(byte[] buffer, int offset, Type type, int length)
-    {
-        // 为简洁起见省略了边界检查，但在生产环境中至关重要
-
-        if (type == typeof(bool))
-            return buffer[offset] > 0; // 简单的检查，真实的位逻辑需要位索引
-            
-        if (type == typeof(byte))
-            return buffer[offset];
-
-        if (type == typeof(short))
-            return BinaryPrimitives.ReadInt16BigEndian(buffer.AsSpan(offset));
-            
-        if (type == typeof(ushort))
-            return BinaryPrimitives.ReadUInt16BigEndian(buffer.AsSpan(offset));
-
-        if (type == typeof(int))
-            return BinaryPrimitives.ReadInt32BigEndian(buffer.AsSpan(offset));
-            
-        if (type == typeof(uint))
-            return BinaryPrimitives.ReadUInt32BigEndian(buffer.AsSpan(offset));
-
-        if (type == typeof(float))
-            return BitConverter.Int32BitsToSingle(BinaryPrimitives.ReadInt32BigEndian(buffer.AsSpan(offset)));
-            
-        if (type == typeof(double))
-            return BitConverter.Int64BitsToDouble(BinaryPrimitives.ReadInt64BigEndian(buffer.AsSpan(offset)));
-        
-        // 简单处理字符串 (假设 ASCII/S7 String)
-        if (type == typeof(string))
-        {
-            // S7 String 前两个字节是 MaxLen 和 ActualLen，后面是字符
-            // 这里假设是纯字符数组或者需要特定处理
-            // 简单起见，按 ASCII 读取指定长度
-            return System.Text.Encoding.ASCII.GetString(buffer, offset, length);
-        }
-
-        return null;
-    }
-
-    public byte[] ToBytes(object value, Type type, int length)
-    {
-        if (type == typeof(bool))
-            return new[] { (bool)value ? (byte)1 : (byte)0 };
-
-        if (type == typeof(byte))
-            return new[] { (byte)value };
-
-        if (type == typeof(short))
-        {
-            var bytes = new byte[2];
-            BinaryPrimitives.WriteInt16BigEndian(bytes, (short)value);
-            return bytes;
-        }
-
-        if (type == typeof(ushort))
-        {
-            var bytes = new byte[2];
-            BinaryPrimitives.WriteUInt16BigEndian(bytes, (ushort)value);
-            return bytes;
-        }
-
-        if (type == typeof(int))
-        {
-            var bytes = new byte[4];
-            BinaryPrimitives.WriteInt32BigEndian(bytes, (int)value);
-            return bytes;
-        }
-
-        if (type == typeof(uint))
-        {
-            var bytes = new byte[4];
-            BinaryPrimitives.WriteUInt32BigEndian(bytes, (uint)value);
-            return bytes;
-        }
-
-        if (type == typeof(float))
-        {
-            var bytes = new byte[4];
-            var intVal = BitConverter.SingleToInt32Bits((float)value);
-            BinaryPrimitives.WriteInt32BigEndian(bytes, intVal);
-            return bytes;
-        }
-
-        if (type == typeof(double))
-        {
-            var bytes = new byte[8];
-            var longVal = BitConverter.DoubleToInt64Bits((double)value);
-            BinaryPrimitives.WriteInt64BigEndian(bytes, longVal);
-            return bytes;
-        }
-        
-        return Array.Empty<byte>();
-    }
-}

src/Sharp/Plc/Services/PlcMonitorService.cs

@@ -1,169 +0,0 @@
-using Common.Results;
-using Plc.Abstractions;
-using Plc.Models;
-using Plc.Utils;
-using System.Collections.Concurrent;
-
-namespace Plc.Services;
-
-public class PlcMonitorService : IPlcService, IDisposable
-{
-    private readonly IPlcDriver _driver;
-    private readonly IPlcOptimizer _optimizer;
-    private readonly IDataConverter _converter;
-    
-    private readonly ConcurrentDictionary<string, PlcTag> _subscriptions = new();
-    private Task? _monitorTask;
-    private CancellationTokenSource? _cts;
-    private readonly TimeSpan _refreshRate = TimeSpan.FromMilliseconds(200);
-
-    public PlcMonitorService(IPlcDriver driver, IPlcOptimizer optimizer, IDataConverter converter)
-    {
-        _driver = driver;
-        _optimizer = optimizer;
-        _converter = converter;
-    }
-
-    public async Task StartAsync(CancellationToken cancellationToken = default)
-    {
-        if (_monitorTask != null) return;
-
-        await _driver.ConnectAsync(cancellationToken);
-        
-        _cts = CancellationTokenSource.CreateLinkedTokenSource(cancellationToken);
-        _monitorTask = Task.Run(() => MonitorLoop(_cts.Token), _cts.Token);
-    }
-
-    public async Task StopAsync()
-    {
-        _cts?.Cancel();
-        if (_monitorTask != null)
-        {
-            try { await _monitorTask; } catch (OperationCanceledException) { }
-        }
-        await _driver.DisconnectAsync();
-    }
-
-    public void Subscribe(PlcTag tag)
-    {
-        _subscriptions.TryAdd(tag.Id, tag);
-    }
-
-    public void Unsubscribe(string tagId)
-    {
-        _subscriptions.TryRemove(tagId, out _);
-    }
-
-    public async Task<Result<T>> ReadAsync<T>(string address)
-    {
-        // 临时读取（未优化）
-        int size = TypeHelper.GetSize(typeof(T));
-        var result = await _driver.ReadBytesAsync(address, (ushort)size);
-        
-        if (result.IsFailure) 
-            return Result.Failure<T>(result.ErrorMessage ?? result.Exception?.Message ?? "Read failed");
-
-        if (result.Value is null)
-            return Result.Failure<T>("Read returned null data");
-
-        var val = _converter.Parse(result.Value, 0, typeof(T), 1);
-        if (val is null)
-            return Result.Failure<T>("Conversion failed");
-            
-        return Result.Success((T)val);
-    }
-    
-    public async Task<Result> WriteAsync<T>(string address, T value)
-    {
-        if (value == null)
-            return Result.Failure("Cannot write null value");
-
-        int size = TypeHelper.GetSize(typeof(T));
-        var bytes = _converter.ToBytes(value, typeof(T), size);
-        
-        if (bytes.Length == 0)
-            return Result.Failure("Conversion to bytes returned empty array. Type might not be supported.");
-
-        return await _driver.WriteBytesAsync(address, bytes);
-    }
-
-    private async Task MonitorLoop(CancellationToken token)
-    {
-        while (!token.IsCancellationRequested)
-        {
-            try
-            {
-                if (!_driver.IsConnected)
-                {
-                    await _driver.ConnectAsync(token);
-                }
-
-                var currentTags = _subscriptions.Values.ToList();
-                if (currentTags.Count == 0)
-                {
-                    await Task.Delay(1000, token);
-                    continue;
-                }
-
-                // 优化：计算分桶
-                var batches = _optimizer.Optimize(currentTags, _driver.MaxPduSize);
-
-                // 执行读取
-                foreach (var batch in batches)
-                {
-                    if (token.IsCancellationRequested) break;
-
-                    var readResult = await _driver.ReadBytesAsync(batch.StartAddress, (ushort)batch.TotalLength, token);
-                    
-                    if (readResult.IsSuccess && readResult.Value != null)
-                    {
-                        DistributeValues(batch, readResult.Value);
-                    }
-                    else
-                    {
-                        // 记录错误
-                    }
-                }
-            }
-            catch (Exception)
-            {
-                // 记录异常
-            }
-
-            await Task.Delay(_refreshRate, token);
-        }
-    }
-
-    private void DistributeValues(PlcReadBatch batch, byte[] data)
-    {
-        dynamic batchStart = batch.ParsedStartAddress!;
-        int batchStartByte = batchStart.ByteOffset;
-
-        foreach (var tag in batch.Tags)
-        {
-            dynamic tagAddr = tag.ParsedAddress!;
-            int tagStartByte = tagAddr.ByteOffset;
-            int relativeOffset = tagStartByte - batchStartByte;
-            
-            // 检查边界
-            int typeSize = TypeHelper.GetSize(tag.DataType);
-            if (relativeOffset + typeSize <= data.Length)
-            {
-                var newVal = _converter.Parse(data, relativeOffset, tag.DataType, tag.Length);
-                
-                // 变更检测
-                if (!Equals(tag.Value, newVal))
-                {
-                    tag.Value = newVal;
-                    tag.OnChanged?.Invoke(tag, newVal);
-                }
-            }
-        }
-    }
-
-    public void Dispose()
-    {
-        _cts?.Cancel();
-        _driver.Dispose();
-    }
-}

src/Sharp/Plc/Utils/TypeHelper.cs

@@ -1,15 +0,0 @@
-namespace Plc.Utils;
-
-public static class TypeHelper
-{
-    public static int GetSize(Type type)
-    {
-        if (type == typeof(bool)) return 1; // S7 usually treats bool as bit, but allocation often aligns to bytes or we need spec handling
-        if (type == typeof(byte)) return 1;
-        if (type == typeof(short) || type == typeof(ushort)) return 2;
-        if (type == typeof(int) || type == typeof(uint) || type == typeof(float)) return 4;
-        if (type == typeof(long) || type == typeof(ulong) || type == typeof(double)) return 8;
-        
-        return 1; // Default or throw
-    }
-}

src/Sharp/Server/App.xaml.cs

@@ -1,9 +1,12 @@
-using System.Windows;
+using System.IO;
+using System.Windows;
 using Microsoft.Extensions.Logging;
 using Config;
 using Sharp.Log;
 using Sharp.Data;
 using Sharp.Data.Context;
+using Sharp.Data.Access;
+using Sharp.Data.Access.Options;
 using Server.Config;
 using Server.Services;
 using Server.Data;
@@ -20,6 +23,7 @@ namespace Server
         public ILoggerFactory? LoggerFactory { get; private set; }
         public ServerService? ServerService { get; private set; }
         public IDataContext? DataContext { get; private set; }
+        public IAccessDataService? AccessDataService { get; private set; }
 
         protected override void OnStartup(StartupEventArgs e)
         {
@@ -36,7 +40,10 @@ namespace Server
                 // 3. 初始化数据库
                 InitializeDatabase();
 
-                // 4. 初始化服务器服务
+                // 4. 初始化 Access 数据服务
+                InitializeAccessDataService();
+
+                // 5. 初始化服务器服务
                 InitializeServerService();
 
                 var logger = LoggerFactory?.CreateLogger<App>();
@@ -74,7 +81,7 @@ namespace Server
                     options.Enrich.Application ??= "SharpServer";
                 });
         }
-
+        
         private void InitializeDatabase()
         {
             if (LoggerFactory == null)
@@ -104,6 +111,62 @@ namespace Server
                 throw;
             }
         }
+        
+        private void InitializeAccessDataService()
+        {
+            if (LoggerFactory == null)
+            {
+                throw new InvalidOperationException("日志系统未初始化");
+            }
+
+            var logger = LoggerFactory.CreateLogger<App>();
+            logger.LogInformation("正在初始化 Access 数据服务...");
+
+            try
+            {
+                // 诊断：输出当前目录信息
+                logger.LogInformation("AppContext.BaseDirectory: {BaseDirectory}", AppContext.BaseDirectory);
+                logger.LogInformation("Environment.CurrentDirectory: {CurrentDirectory}", Environment.CurrentDirectory);
+                logger.LogInformation("数据库文件在输出目录: {DbPath}",
+                    Path.Combine(AppContext.BaseDirectory, "dbDwDmsSetup.accdb"));
+                logger.LogInformation("数据库文件是否存在: {Exists}",
+                    File.Exists(Path.Combine(AppContext.BaseDirectory, "dbDwDmsSetup.accdb")));
+
+                // 配置 Access 数据库选项
+                var options = new AccessDatabaseOptions
+                {
+                    DatabaseFile = "dbDwDmsSetup.accdb",
+
+                    // 使用 ACE OLE DB 16.0（功能最完整，支持所有连接字符串参数）
+                    // 注意：12.0 不支持 Connect Timeout 参数，会导致 0x80040E21 错误
+                    ProviderName = AccessProviderNames.AceOleDb16,
+
+                    // 如果数据库有密码，可以在这里设置：
+                    // Password = "your_password",
+
+                    // 或者使用加密密码（需要先注册自定义解密器）：
+                    // EncryptedPassword = "encrypted_password",
+
+                    // 可选：调整稳健性配置
+                    // MaxRetryCount = 3,              // 最大重试次数
+                    // RetryDelayMilliseconds = 100,   // 重试延迟
+                    // ConnectionTimeout = 15,         // 连接超时（秒）
+                };
+
+                // 创建 Access 数据服务
+                AccessDataService = new AccessDataService(
+                    options,
+                    logger: LoggerFactory.CreateLogger<AccessDataService>());
+
+                logger.LogInformation("Access 数据服务初始化成功");
+            }
+            catch (Exception ex)
+            {
+                logger.LogError(ex, "Access 数据服务初始化失败");
+                // 不抛出异常，因为 Access 数据库是可选的
+                logger.LogWarning("Access 数据服务初始化失败，但应用程序将继续运行");
+            }
+        }
 
         private void InitializeServerService()
         {

src/Sharp/Server/Controllers/DataController.cs

@@ -23,13 +23,13 @@ namespace Server.Controllers
         public async Task GetAll(HttpContext context)
         {
             var items = _dataStore.Values.ToList();
-            var result = ResultExtensions.HttpSuccess(new
+            var data = new
             {
                 Count = items.Count,
                 Items = items
-            });
+            };
 
-            await WriteSuccessResponseAsync(context, result);
+            await WriteSuccessResponseAsync(context, data);
         }
 
         /// <summary>
@@ -49,8 +49,7 @@ namespace Server.Controllers
 
             if (_dataStore.TryGetValue(id, out var item))
             {
-                var result = ResultExtensions.HttpSuccess(item);
-                await WriteSuccessResponseAsync(context, result);
+                await WriteSuccessResponseAsync(context, item);
             }
             else
             {
@@ -87,8 +86,7 @@ namespace Server.Controllers
 
             _dataStore[id] = item;
 
-            var result = ResultExtensions.HttpSuccess(item, "Data created successfully");
-            await WriteSuccessResponseAsync(context, result);
+            await WriteSuccessResponseAsync(context, item, "Data created successfully");
         }
 
         /// <summary>
@@ -129,8 +127,7 @@ namespace Server.Controllers
                 item.UpdatedAt = DateTime.UtcNow;
             }
 
-            var result = ResultExtensions.HttpSuccess(item, "Data updated successfully");
-            await WriteSuccessResponseAsync(context, result);
+            await WriteSuccessResponseAsync(context, item, "Data updated successfully");
         }
 
         /// <summary>
@@ -150,8 +147,7 @@ namespace Server.Controllers
 
             if (_dataStore.TryRemove(id, out var item))
             {
-                var result = ResultExtensions.HttpSuccess(item, "Data deleted successfully");
-                await WriteSuccessResponseAsync(context, result);
+                await WriteSuccessResponseAsync(context, item, "Data deleted successfully");
             }
             else
             {
@@ -169,8 +165,8 @@ namespace Server.Controllers
             var count = _dataStore.Count;
             _dataStore.Clear();
 
-            var result = ResultExtensions.HttpSuccess(new { DeletedCount = count }, "All data cleared");
-            await WriteSuccessResponseAsync(context, result);
+            var data = new { DeletedCount = count };
+            await WriteSuccessResponseAsync(context, data, "All data cleared");
         }
     }
 

src/Sharp/Server/Controllers/HealthController.cs

@@ -19,14 +19,14 @@ namespace Server.Controllers
         [HttpGet]
         public async Task Check(HttpContext context)
         {
-            var result = ResultExtensions.HttpSuccess(new
+            var data = new
             {
                 Status = "Healthy",
                 Timestamp = DateTime.UtcNow,
                 Uptime = DateTime.UtcNow - Process.GetCurrentProcess().StartTime
-            });
+            };
 
-            await WriteSuccessResponseAsync(context, result);
+            await WriteSuccessResponseAsync(context, data);
         }
 
         /// <summary>
@@ -37,7 +37,7 @@ namespace Server.Controllers
         public async Task DetailedCheck(HttpContext context)
         {
             var process = Process.GetCurrentProcess();
-            var result = ResultExtensions.HttpSuccess(new
+            var data = new
             {
                 Status = "Healthy",
                 Timestamp = DateTime.UtcNow,
@@ -60,9 +60,9 @@ namespace Server.Controllers
                     },
                     Threads = process.Threads.Count
                 }
-            });
+            };
 
-            await WriteSuccessResponseAsync(context, result);
+            await WriteSuccessResponseAsync(context, data);
         }
     }
 }

src/Sharp/Server/Controllers/SystemController.cs

@@ -18,7 +18,7 @@ namespace Server.Controllers
         [HttpGet("/info")]
         public async Task GetSystemInfo(HttpContext context)
         {
-            var result = ResultExtensions.HttpSuccess(new
+            var data = new
             {
                 MachineName = Environment.MachineName,
                 UserName = Environment.UserName,
@@ -30,9 +30,9 @@ namespace Server.Controllers
                 CurrentDirectory = Environment.CurrentDirectory,
                 TickCount = Environment.TickCount64,
                 Version = Environment.Version.ToString()
-            });
+            };
 
-            await WriteSuccessResponseAsync(context, result);
+            await WriteSuccessResponseAsync(context, data);
         }
 
         /// <summary>
@@ -59,7 +59,7 @@ namespace Server.Controllers
                 return;
             }
 
-            var successResult = ResultExtensions.HttpSuccess(new { Name = name, Value = value });
+            var successResult = new { Name = name, Value = value };
             await WriteSuccessResponseAsync(context, successResult);
         }
 
@@ -73,7 +73,7 @@ namespace Server.Controllers
             var now = DateTime.Now;
             var utcNow = DateTime.UtcNow;
 
-            var result = ResultExtensions.HttpSuccess(new
+            var data = new
             {
                 Local = new
                 {
@@ -89,9 +89,9 @@ namespace Server.Controllers
                     Time = utcNow.TimeOfDay,
                     UnixTimestamp = DateTimeOffset.UtcNow.ToUnixTimeSeconds()
                 }
-            });
+            };
 
-            await WriteSuccessResponseAsync(context, result);
+            await WriteSuccessResponseAsync(context, data);
         }
     }
 }

src/Sharp/Server/Data/Access/AccessDbContext.cs

@@ -0,0 +1,40 @@
+using Microsoft.EntityFrameworkCore;
+
+namespace Server.Data.Access;
+
+/// <summary>
+/// Access 数据库上下文
+/// </summary>
+public class AccessDbContext : DbContext
+{
+    public AccessDbContext(DbContextOptions<AccessDbContext> options) : base(options)
+    {
+    }
+
+    public DbSet<UserInfo> UserInfos => Set<UserInfo>();
+    public DbSet<UserPermission> UserPermissions => Set<UserPermission>();
+
+    protected override void OnModelCreating(ModelBuilder modelBuilder)
+    {
+        base.OnModelCreating(modelBuilder);
+
+        modelBuilder.Entity<UserInfo>(entity =>
+        {
+            entity.HasKey(e => e.UserName);
+            entity.Property(e => e.UserName).IsRequired().HasMaxLength(255);
+            entity.Property(e => e.Password).IsRequired().HasMaxLength(255);
+        });
+
+        modelBuilder.Entity<UserPermission>(entity =>
+        {
+            entity.HasKey(e => new { e.UserInfo_UserName, e.Permission_Code });
+            entity.Property(e => e.UserInfo_UserName).IsRequired().HasMaxLength(255);
+            entity.Property(e => e.Permission_Code).IsRequired().HasMaxLength(255);
+
+            entity.HasOne(e => e.UserInfo)
+                .WithMany(u => u.Permissions)
+                .HasForeignKey(e => e.UserInfo_UserName)
+                .OnDelete(DeleteBehavior.Cascade);
+        });
+    }
+}

src/Sharp/Server/Data/Access/AccessEntities.cs

@@ -0,0 +1,40 @@
+using System.ComponentModel.DataAnnotations;
+using System.ComponentModel.DataAnnotations.Schema;
+
+namespace Server.Data.Access;
+
+/// <summary>
+/// UserInfo 表实体
+/// </summary>
+[Table("UserInfo")]
+public class UserInfo
+{
+    [Key]
+    [Required]
+    [MaxLength(255)]
+    public string UserName { get; set; } = string.Empty;
+
+    [Required]
+    [MaxLength(255)]
+    public string Password { get; set; } = string.Empty;
+
+    public ICollection<UserPermission> Permissions { get; set; } = new List<UserPermission>();
+}
+
+/// <summary>
+/// UserPermission 表实体
+/// </summary>
+[Table("UserPermission")]
+public class UserPermission
+{
+    [Required]
+    [MaxLength(255)]
+    public string UserInfo_UserName { get; set; } = string.Empty;
+
+    [Required]
+    [MaxLength(255)]
+    public string Permission_Code { get; set; } = string.Empty;
+
+    [ForeignKey(nameof(UserInfo_UserName))]
+    public UserInfo? UserInfo { get; set; }
+}

src/Sharp/Server/Data/Access/CRUD示例.md

@@ -0,0 +1,438 @@
+# Access 数据库 CRUD 完整示例
+
+使用 **System.Data.OleDb** 对 Access 数据库进行增删改查操作。
+
+## 📦 连接字符串
+
+```csharp
+var connectionString = "Provider=Microsoft.ACE.OLEDB.12.0;Data Source=dbDwDmsSetup.accdb";
+using var connection = new OleDbConnection(connectionString);
+connection.Open();
+```
+
+---
+
+## 1️⃣ 查询（SELECT）
+
+### 查询所有用户
+
+```csharp
+using var connection = new OleDbConnection(connectionString);
+connection.Open();
+
+var users = new List<UserInfo>();
+using var command = new OleDbCommand("SELECT UserName, Password FROM UserInfo", connection);
+using var reader = command.ExecuteReader();
+
+while (reader.Read())
+{
+    var user = new UserInfo
+    {
+        UserName = reader["UserName"]?.ToString() ?? "",
+        Password = reader["Password"]?.ToString() ?? ""
+    };
+    users.Add(user);
+}
+
+Console.WriteLine($"查询到 {users.Count} 个用户");
+```
+
+### 条件查询
+
+```csharp
+// 根据用户名查询
+using var command = new OleDbCommand(
+    "SELECT UserName, Password FROM UserInfo WHERE UserName = ?", connection);
+command.Parameters.AddWithValue("@UserName", "admin");
+
+using var reader = command.ExecuteReader();
+if (reader.Read())
+{
+    var userName = reader["UserName"]?.ToString();
+    var password = reader["Password"]?.ToString();
+    Console.WriteLine($"找到用户: {userName}");
+}
+```
+
+### 统计数量
+
+```csharp
+using var command = new OleDbCommand(
+    "SELECT COUNT(*) FROM UserPermission WHERE UserInfo_UserName = ?", connection);
+command.Parameters.AddWithValue("@UserName", "admin");
+
+var count = Convert.ToInt32(command.ExecuteScalar());
+Console.WriteLine($"该用户有 {count} 个权限");
+```
+
+---
+
+## 2️⃣ 添加（INSERT）
+
+### 添加用户
+
+```csharp
+using var connection = new OleDbConnection(connectionString);
+connection.Open();
+
+// 1. 先检查用户是否已存在
+using (var checkCmd = new OleDbCommand(
+    "SELECT COUNT(*) FROM UserInfo WHERE UserName = ?", connection))
+{
+    checkCmd.Parameters.AddWithValue("@UserName", "newuser");
+    var exists = Convert.ToInt32(checkCmd.ExecuteScalar()) > 0;
+
+    if (exists)
+    {
+        Console.WriteLine("用户已存在!");
+        return;
+    }
+}
+
+// 2. 插入新用户
+using (var insertCmd = new OleDbCommand(
+    "INSERT INTO UserInfo (UserName, Password) VALUES (?, ?)", connection))
+{
+    insertCmd.Parameters.AddWithValue("@UserName", "newuser");
+    insertCmd.Parameters.AddWithValue("@Password", "password123");
+
+    var rowsAffected = insertCmd.ExecuteNonQuery();
+    Console.WriteLine($"成功添加 {rowsAffected} 个用户");
+}
+```
+
+### 添加权限
+
+```csharp
+using var insertCmd = new OleDbCommand(
+    "INSERT INTO UserPermission (UserInfo_UserName, Permission_Code) VALUES (?, ?)", connection);
+insertCmd.Parameters.AddWithValue("@UserName", "newuser");
+insertCmd.Parameters.AddWithValue("@PermissionCode", "READ_DATA");
+
+var rowsAffected = insertCmd.ExecuteNonQuery();
+Console.WriteLine($"成功添加权限: {rowsAffected} 条");
+```
+
+---
+
+## 3️⃣ 修改（UPDATE）
+
+### 修改用户密码
+
+```csharp
+using var connection = new OleDbConnection(connectionString);
+connection.Open();
+
+using var updateCmd = new OleDbCommand(
+    "UPDATE UserInfo SET Password = ? WHERE UserName = ?", connection);
+updateCmd.Parameters.AddWithValue("@Password", "newpassword");
+updateCmd.Parameters.AddWithValue("@UserName", "admin");
+
+var rowsAffected = updateCmd.ExecuteNonQuery();
+
+if (rowsAffected > 0)
+{
+    Console.WriteLine("密码修改成功!");
+}
+else
+{
+    Console.WriteLine("用户不存在!");
+}
+```
+
+### 批量更新
+
+```csharp
+// 将所有用户的密码更新为默认密码
+using var updateCmd = new OleDbCommand(
+    "UPDATE UserInfo SET Password = ? WHERE Password IS NULL OR Password = ''", connection);
+updateCmd.Parameters.AddWithValue("@Password", "default123");
+
+var rowsAffected = updateCmd.ExecuteNonQuery();
+Console.WriteLine($"更新了 {rowsAffected} 个用户的密码");
+```
+
+---
+
+## 4️⃣ 删除（DELETE）
+
+### 删除用户（含事务）
+
+```csharp
+using var connection = new OleDbConnection(connectionString);
+connection.Open();
+
+// 使用事务确保数据一致性
+using var transaction = connection.BeginTransaction();
+
+try
+{
+    // 1. 先删除用户的所有权限
+    using (var deletePermCmd = new OleDbCommand(
+        "DELETE FROM UserPermission WHERE UserInfo_UserName = ?", connection, transaction))
+    {
+        deletePermCmd.Parameters.AddWithValue("@UserName", "testuser");
+        var permCount = deletePermCmd.ExecuteNonQuery();
+        Console.WriteLine($"删除了 {permCount} 个权限");
+    }
+
+    // 2. 再删除用户
+    using (var deleteUserCmd = new OleDbCommand(
+        "DELETE FROM UserInfo WHERE UserName = ?", connection, transaction))
+    {
+        deleteUserCmd.Parameters.AddWithValue("@UserName", "testuser");
+        var userCount = deleteUserCmd.ExecuteNonQuery();
+
+        if (userCount == 0)
+        {
+            transaction.Rollback();
+            Console.WriteLine("用户不存在!");
+            return;
+        }
+
+        Console.WriteLine($"删除了 {userCount} 个用户");
+    }
+
+    // 3. 提交事务
+    transaction.Commit();
+    Console.WriteLine("删除成功!");
+}
+catch (Exception ex)
+{
+    // 回滚事务
+    transaction.Rollback();
+    Console.WriteLine($"删除失败: {ex.Message}");
+}
+```
+
+### 删除权限
+
+```csharp
+using var deleteCmd = new OleDbCommand(
+    "DELETE FROM UserPermission WHERE UserInfo_UserName = ? AND Permission_Code = ?", connection);
+deleteCmd.Parameters.AddWithValue("@UserName", "admin");
+deleteCmd.Parameters.AddWithValue("@PermissionCode", "DELETE_DATA");
+
+var rowsAffected = deleteCmd.ExecuteNonQuery();
+Console.WriteLine($"删除了 {rowsAffected} 个权限");
+```
+
+### 批量删除
+
+```csharp
+// 删除所有没有权限的用户
+using var deleteCmd = new OleDbCommand(@"
+    DELETE FROM UserInfo
+    WHERE UserName NOT IN (
+        SELECT DISTINCT UserInfo_UserName FROM UserPermission
+    )", connection);
+
+var rowsAffected = deleteCmd.ExecuteNonQuery();
+Console.WriteLine($"删除了 {rowsAffected} 个无权限用户");
+```
+
+---
+
+## 🔥 高级操作
+
+### 1. JOIN 查询
+
+```csharp
+// 查询用户及其所有权限
+using var command = new OleDbCommand(@"
+    SELECT u.UserName, u.Password, p.Permission_Code
+    FROM UserInfo u
+    LEFT JOIN UserPermission p ON u.UserName = p.UserInfo_UserName
+    ORDER BY u.UserName", connection);
+
+using var reader = command.ExecuteReader();
+while (reader.Read())
+{
+    var userName = reader["UserName"]?.ToString();
+    var permission = reader["Permission_Code"]?.ToString();
+    Console.WriteLine($"{userName}: {permission ?? "(无权限)"}");
+}
+```
+
+### 2. 分组统计
+
+```csharp
+// 统计每个用户的权限数量
+using var command = new OleDbCommand(@"
+    SELECT u.UserName, COUNT(p.Permission_Code) AS PermCount
+    FROM UserInfo u
+    LEFT JOIN UserPermission p ON u.UserName = p.UserInfo_UserName
+    GROUP BY u.UserName
+    ORDER BY PermCount DESC", connection);
+
+using var reader = command.ExecuteReader();
+while (reader.Read())
+{
+    var userName = reader["UserName"]?.ToString();
+    var count = Convert.ToInt32(reader["PermCount"]);
+    Console.WriteLine($"{userName}: {count} 个权限");
+}
+```
+
+### 3. 参数化批量插入
+
+```csharp
+using var connection = new OleDbConnection(connectionString);
+connection.Open();
+
+var users = new[]
+{
+    ("user1", "pass1"),
+    ("user2", "pass2"),
+    ("user3", "pass3")
+};
+
+using var transaction = connection.BeginTransaction();
+try
+{
+    using var insertCmd = new OleDbCommand(
+        "INSERT INTO UserInfo (UserName, Password) VALUES (?, ?)", connection, transaction);
+
+    foreach (var (userName, password) in users)
+    {
+        insertCmd.Parameters.Clear();
+        insertCmd.Parameters.AddWithValue("@UserName", userName);
+        insertCmd.Parameters.AddWithValue("@Password", password);
+        insertCmd.ExecuteNonQuery();
+    }
+
+    transaction.Commit();
+    Console.WriteLine($"成功添加 {users.Length} 个用户");
+}
+catch
+{
+    transaction.Rollback();
+    throw;
+}
+```
+
+### 4. 存在性检查
+
+```csharp
+// 检查用户是否存在
+public bool UserExists(string userName)
+{
+    using var connection = new OleDbConnection(connectionString);
+    connection.Open();
+
+    using var command = new OleDbCommand(
+        "SELECT COUNT(*) FROM UserInfo WHERE UserName = ?", connection);
+    command.Parameters.AddWithValue("@UserName", userName);
+
+    return Convert.ToInt32(command.ExecuteScalar()) > 0;
+}
+
+// 使用
+if (UserExists("admin"))
+{
+    Console.WriteLine("用户存在");
+}
+```
+
+---
+
+## 📝 最佳实践
+
+### 1. 使用 using 语句
+
+```csharp
+// ✅ 推荐：自动释放资源
+using var connection = new OleDbConnection(connectionString);
+using var command = new OleDbCommand(sql, connection);
+using var reader = command.ExecuteReader();
+
+// ❌ 不推荐：需要手动释放
+var connection = new OleDbConnection(connectionString);
+try
+{
+    // ...
+}
+finally
+{
+    connection.Dispose();
+}
+```
+
+### 2. 使用参数化查询（防止 SQL 注入）
+
+```csharp
+// ✅ 推荐：参数化查询
+var sql = "SELECT * FROM UserInfo WHERE UserName = ?";
+command.Parameters.AddWithValue("@UserName", userName);
+
+// ❌ 危险：字符串拼接（SQL 注入风险）
+var sql = $"SELECT * FROM UserInfo WHERE UserName = '{userName}'";
+```
+
+### 3. 使用事务保证数据一致性
+
+```csharp
+// ✅ 推荐：使用事务
+using var transaction = connection.BeginTransaction();
+try
+{
+    // 多个操作
+    command1.ExecuteNonQuery();
+    command2.ExecuteNonQuery();
+    transaction.Commit();
+}
+catch
+{
+    transaction.Rollback();
+    throw;
+}
+```
+
+### 4. 异常处理
+
+```csharp
+try
+{
+    using var connection = new OleDbConnection(connectionString);
+    connection.Open();
+    // 数据库操作
+}
+catch (OleDbException ex)
+{
+    Console.WriteLine($"数据库错误: {ex.Message}");
+    // 记录日志
+}
+catch (Exception ex)
+{
+    Console.WriteLine($"未知错误: {ex.Message}");
+    // 记录日志
+}
+```
+
+---
+
+## 🎯 完整示例项目
+
+完整的 CRUD 操作已集成到 **Server 项目**中：
+
+**文件位置**：
+- UI: `Server/Views/AccessDatabaseWindowOleDb.xaml`
+- 代码: `Server/Views/AccessDatabaseWindowOleDb.xaml.cs`
+
+**功能列表**：
+- ✅ 查询所有用户
+- ✅ 添加新用户
+- ✅ 修改用户密码
+- ✅ 删除用户（含级联删除权限）
+- ✅ 添加用户权限
+- ✅ 删除用户权限
+- ✅ 事务支持
+- ✅ 异常处理
+- ✅ 异步操作（不阻塞 UI）
+
+**运行方式**：
+1. 启动 Server 项目
+2. 点击 "Access数据库" 按钮
+3. 尽情测试增删改查功能！
+
+数据库随意修改，不用担心！🎉

src/Sharp/Server/Data/Access/README.md

@@ -0,0 +1,186 @@
+# Access 数据库访问方案对比
+
+## 方案选择
+
+### ✅ 方案 A：System.Data.OleDb（推荐）
+
+**适用场景**：
+- 简单的增删改查操作
+- 性能要求高
+- 需要稳定可靠的方案
+- 不需要复杂的 LINQ 查询
+
+**实现文件**：
+- `Views/AccessDatabaseWindowOleDb.xaml`
+- `Views/AccessDatabaseWindowOleDb.xaml.cs`
+
+**示例代码**：
+```csharp
+// 1. 创建连接
+var connectionString = "Provider=Microsoft.ACE.OLEDB.12.0;Data Source=dbDwDmsSetup.accdb";
+using var connection = new OleDbConnection(connectionString);
+connection.Open();
+
+// 2. 查询数据
+using var command = new OleDbCommand("SELECT UserName, Password FROM UserInfo", connection);
+using var reader = command.ExecuteReader();
+while (reader.Read())
+{
+    var userName = reader["UserName"]?.ToString();
+    var password = reader["Password"]?.ToString();
+}
+
+// 3. 插入数据
+using var insertCmd = new OleDbCommand(
+    "INSERT INTO UserInfo (UserName, Password) VALUES (?, ?)", connection);
+insertCmd.Parameters.AddWithValue("@UserName", "newuser");
+insertCmd.Parameters.AddWithValue("@Password", "password");
+insertCmd.ExecuteNonQuery();
+
+// 4. 更新数据
+using var updateCmd = new OleDbCommand(
+    "UPDATE UserInfo SET Password = ? WHERE UserName = ?", connection);
+updateCmd.Parameters.AddWithValue("@Password", "newpassword");
+updateCmd.Parameters.AddWithValue("@UserName", "username");
+updateCmd.ExecuteNonQuery();
+
+// 5. 删除数据
+using var deleteCmd = new OleDbCommand(
+    "DELETE FROM UserInfo WHERE UserName = ?", connection);
+deleteCmd.Parameters.AddWithValue("@UserName", "username");
+deleteCmd.ExecuteNonQuery();
+```
+
+**优点**：
+- ✅ 微软官方支持
+- ✅ 无需额外 NuGet 包
+- ✅ 性能最佳
+- ✅ 稳定可靠
+- ✅ 适用于所有 .NET 版本
+
+**缺点**：
+- ❌ 需要手写 SQL
+- ❌ 没有 LINQ 支持
+- ❌ 没有自动实体映射
+
+---
+
+### 方案 B：EntityFrameworkCore.Jet
+
+**适用场景**：
+- 需要复杂的 LINQ 查询
+- 需要实体关系映射
+- 代码优雅度要求高
+- 可以接受第三方库
+
+**实现文件**：
+- `Views/AccessDatabaseWindow.xaml`
+- `Views/AccessDatabaseWindow.xaml.cs`
+- `Data/Access/AccessEntities.cs`
+- `Data/Access/AccessDbContext.cs`
+
+**示例代码**：
+```csharp
+// 1. 创建 DbContext
+var optionsBuilder = new DbContextOptionsBuilder<AccessDbContext>();
+optionsBuilder.UseJet("Provider=Microsoft.ACE.OLEDB.12.0;Data Source=dbDwDmsSetup.accdb");
+using var dbContext = new AccessDbContext(optionsBuilder.Options);
+
+// 2. LINQ 查询
+var users = await dbContext.UserInfos
+    .Include(u => u.Permissions)
+    .Where(u => u.UserName.Contains("admin"))
+    .ToListAsync();
+
+// 3. 插入数据
+var newUser = new UserInfo { UserName = "newuser", Password = "password" };
+dbContext.UserInfos.Add(newUser);
+await dbContext.SaveChangesAsync();
+
+// 4. 更新数据
+var user = await dbContext.UserInfos.FindAsync("username");
+if (user != null)
+{
+    user.Password = "newpassword";
+    await dbContext.SaveChangesAsync();
+}
+
+// 5. 删除数据
+var userToDelete = await dbContext.UserInfos.FindAsync("username");
+if (userToDelete != null)
+{
+    dbContext.UserInfos.Remove(userToDelete);
+    await dbContext.SaveChangesAsync();
+}
+```
+
+**优点**：
+- ✅ LINQ 查询支持
+- ✅ 自动实体映射
+- ✅ 代码更优雅
+- ✅ 支持导航属性
+
+**缺点**：
+- ❌ 第三方库（EntityFrameworkCore.Jet）
+- ❌ 版本兼容性问题
+- ❌ 性能开销
+- ❌ 可能与其他 EF Core 提供程序冲突
+
+---
+
+## 推荐方案
+
+### 对于简单的增删改查：
+
+**推荐使用方案 A（System.Data.OleDb）**
+
+理由：
+1. 稳定可靠，微软官方支持
+2. 性能最佳
+3. 无依赖问题
+4. 代码简单直接
+
+### 对于复杂的业务逻辑：
+
+可以考虑方案 B（EntityFrameworkCore.Jet），但需要：
+1. 接受第三方库的风险
+2. 处理版本兼容性问题
+3. 确保不与其他数据库提供程序冲突
+
+---
+
+## 当前 Server 项目使用的方案
+
+当前使用：**方案 A（System.Data.OleDb）** ✅
+
+主窗口按钮 "Access数据库" 打开的是 `AccessDatabaseWindowOleDb` 窗口。
+
+如需切换到方案 B，修改 `MainWindow.xaml.cs` 中的 `AccessDbButton_Click` 方法：
+
+```csharp
+// 方案 A（当前）
+var window = new AccessDatabaseWindowOleDb { Owner = this };
+
+// 方案 B
+var window = new AccessDatabaseWindow { Owner = this };
+```
+
+---
+
+## 性能对比
+
+| 操作 | OleDb | EF Core Jet |
+|------|-------|-------------|
+| 简单查询 | ⭐⭐⭐⭐⭐ | ⭐⭐⭐ |
+| 复杂查询 | ⭐⭐⭐ | ⭐⭐⭐⭐⭐ |
+| 插入操作 | ⭐⭐⭐⭐⭐ | ⭐⭐⭐ |
+| 批量操作 | ⭐⭐⭐⭐⭐ | ⭐⭐ |
+| 内存占用 | ⭐⭐⭐⭐⭐ | ⭐⭐⭐ |
+
+---
+
+## 总结
+
+对于你的需求（简单的增删改查），**强烈推荐使用 System.Data.OleDb（方案 A）**。
+
+它是最稳定、性能最好、最简单的方案。

src/Sharp/Server/MainWindow.xaml

@@ -55,6 +55,8 @@
                             Background="#FF9800" Foreground="White" BorderThickness="0" FontWeight="Bold" Cursor="Hand" IsEnabled="False"/>
                     <Button x:Name="DataManagementButton" Content="数据管理" Width="100" Height="32" Margin="0,0,10,0" Click="DataManagementButton_Click"
                             Background="#673AB7" Foreground="White" BorderThickness="0" FontWeight="Bold" Cursor="Hand"/>
+                    <Button x:Name="AccessDbButton" Content="Access数据库" Width="110" Height="32" Margin="0,0,10,0" Click="AccessDbButton_Click"
+                            Background="#009688" Foreground="White" BorderThickness="0" FontWeight="Bold" Cursor="Hand"/>
                     <Button x:Name="ClearLogButton" Content="清空日志" Width="100" Height="32" Click="ClearLogButton_Click"
                             Background="#9E9E9E" Foreground="White" BorderThickness="0" FontWeight="Bold" Cursor="Hand"/>
                 </StackPanel>

src/Sharp/Server/MainWindow.xaml.cs

@@ -155,6 +155,26 @@ namespace Server
             }
         }
 
+        private void AccessDbButton_Click(object sender, RoutedEventArgs e)
+        {
+            try
+            {
+                _logger?.LogInformation("打开 Access 数据库管理窗口 (OleDb)");
+                var window = new AccessDatabaseWindowOleDb
+                {
+                    Owner = this
+                };
+                window.ShowDialog();
+                _logger?.LogInformation("Access 数据库管理窗口已关闭");
+            }
+            catch (Exception ex)
+            {
+                _logger?.LogError(ex, "打开 Access 数据库管理窗口失败");
+                AppendLog($"打开 Access 数据库管理窗口失败: {ex.Message}");
+                MessageBox.Show($"打开 Access 数据库管理窗口失败: {ex.Message}", "错误", MessageBoxButton.OK, MessageBoxImage.Error);
+            }
+        }
+
         private void OnServerStatusChanged(object? sender, string status)
         {
             Dispatcher.Invoke(() =>

src/Sharp/Server/Server.csproj

@@ -7,6 +7,9 @@
     <ImplicitUsings>enable</ImplicitUsings>
     <UseWPF>true</UseWPF>
 
+    <!-- 强制使用 x64 架构，与已安装的 64 位 ACE 驱动匹配 -->
+    <PlatformTarget>x64</PlatformTarget>
+
     <PublishSingleFile>true</PublishSingleFile>
     <SelfContained>true</SelfContained>
     <RuntimeIdentifier>win-x64</RuntimeIdentifier>
@@ -22,6 +25,7 @@
     <ProjectReference Include="..\Wpf\Wpf.csproj" />
     <ProjectReference Include="..\Common\Common.csproj" />
     <ProjectReference Include="..\Data\Data.csproj" />
+    <ProjectReference Include="..\Data.Access\Data.Access.csproj" />
   </ItemGroup>
 
   <ItemGroup>
@@ -34,6 +38,9 @@
     <None Update="appsettings.json">
       <CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory>
     </None>
+    <None Update="dbDwDmsSetup.accdb">
+      <CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory>
+    </None>
   </ItemGroup>
 
 </Project>

src/Sharp/Server/Views/AccessDatabaseWindow.xaml

@@ -0,0 +1,54 @@
+<Window x:Class="Server.Views.AccessDatabaseWindow"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
+        xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
+        mc:Ignorable="d"
+        Title="Access 数据库管理" Height="600" Width="900"
+        WindowStartupLocation="CenterScreen">
+    <Grid Margin="10">
+        <Grid.RowDefinitions>
+            <RowDefinition Height="Auto"/>
+            <RowDefinition Height="*"/>
+            <RowDefinition Height="Auto"/>
+            <RowDefinition Height="200"/>
+        </Grid.RowDefinitions>
+
+        <!-- 标题和操作栏 -->
+        <StackPanel Grid.Row="0" Orientation="Horizontal" Margin="0,0,0,10">
+            <TextBlock Text="Access 数据库管理" FontSize="20" FontWeight="Bold" VerticalAlignment="Center"/>
+            <TextBlock Text=" (dbDwDmsSetup.accdb)" FontSize="14" Foreground="Gray" VerticalAlignment="Center" Margin="5,0,0,0"/>
+            <Button Content="刷新数据" Click="RefreshButton_Click" Margin="20,0,0,0" Padding="10,5"/>
+            <Button Content="测试连接" Click="TestConnectionButton_Click" Margin="10,0,0,0" Padding="10,5"/>
+        </StackPanel>
+
+        <!-- 用户列表 -->
+        <GroupBox Grid.Row="1" Header="用户列表" Margin="0,0,0,10">
+            <DataGrid x:Name="UsersDataGrid"
+                      AutoGenerateColumns="False"
+                      IsReadOnly="True"
+                      SelectionMode="Single"
+                      SelectionChanged="UsersDataGrid_SelectionChanged">
+                <DataGrid.Columns>
+                    <DataGridTextColumn Header="用户名" Binding="{Binding UserName}" Width="200"/>
+                    <DataGridTextColumn Header="密码" Binding="{Binding Password}" Width="*"/>
+                    <DataGridTextColumn Header="权限数量" Binding="{Binding Permissions.Count}" Width="100"/>
+                </DataGrid.Columns>
+            </DataGrid>
+        </GroupBox>
+
+        <!-- 分隔符 -->
+        <GridSplitter Grid.Row="2" Height="5" HorizontalAlignment="Stretch" Background="LightGray"/>
+
+        <!-- 权限列表 -->
+        <GroupBox Grid.Row="3" Header="选中用户的权限">
+            <DataGrid x:Name="PermissionsDataGrid"
+                      AutoGenerateColumns="False"
+                      IsReadOnly="True">
+                <DataGrid.Columns>
+                    <DataGridTextColumn Header="权限代码" Binding="{Binding Permission_Code}" Width="*"/>
+                </DataGrid.Columns>
+            </DataGrid>
+        </GroupBox>
+    </Grid>
+</Window>

src/Sharp/Server/Views/AccessDatabaseWindow.xaml.cs

@@ -0,0 +1,146 @@
+using System;
+using System.Data.OleDb;
+using System.IO;
+using System.Linq;
+using System.Windows;
+using EntityFrameworkCore.Jet;
+using Microsoft.EntityFrameworkCore;
+using Microsoft.Extensions.Logging;
+using Sharp.Data.Access.Options;
+using Server.Data.Access;
+
+namespace Server.Views;
+
+public partial class AccessDatabaseWindow : Window
+{
+    private readonly ILogger<AccessDatabaseWindow>? _logger;
+    private const string DatabaseFile = "dbDwDmsSetup.accdb";
+
+    public AccessDatabaseWindow()
+    {
+        InitializeComponent();
+
+        try
+        {
+            var app = (App)Application.Current;
+            _logger = app.LoggerFactory?.CreateLogger<AccessDatabaseWindow>();
+
+            Loaded += AccessDatabaseWindow_Loaded;
+        }
+        catch (Exception ex)
+        {
+            MessageBox.Show($"初始化失败: {ex.Message}", "错误", MessageBoxButton.OK, MessageBoxImage.Error);
+        }
+    }
+
+    private async void AccessDatabaseWindow_Loaded(object sender, RoutedEventArgs e)
+    {
+        await LoadDataAsync();
+    }
+
+    private async void RefreshButton_Click(object sender, RoutedEventArgs e)
+    {
+        await LoadDataAsync();
+    }
+
+    private async void TestConnectionButton_Click(object sender, RoutedEventArgs e)
+    {
+        try
+        {
+            _logger?.LogInformation("测试 Access 数据库连接...");
+
+            using var dbContext = CreateDbContext();
+            var canConnect = await dbContext.Database.CanConnectAsync();
+
+            if (canConnect)
+            {
+                _logger?.LogInformation("数据库连接成功!");
+                MessageBox.Show("数据库连接成功!", "成功", MessageBoxButton.OK, MessageBoxImage.Information);
+            }
+            else
+            {
+                _logger?.LogWarning("无法连接到数据库");
+                MessageBox.Show("无法连接到数据库", "警告", MessageBoxButton.OK, MessageBoxImage.Warning);
+            }
+        }
+        catch (Exception ex)
+        {
+            _logger?.LogError(ex, "测试连接失败");
+            MessageBox.Show($"测试连接失败: {ex.Message}", "错误", MessageBoxButton.OK, MessageBoxImage.Error);
+        }
+    }
+
+    private async System.Threading.Tasks.Task LoadDataAsync()
+    {
+        try
+        {
+            _logger?.LogInformation("开始加载 Access 数据库数据...");
+
+            using var dbContext = CreateDbContext();
+
+            // 查询所有用户及其权限
+            var users = await dbContext.UserInfos
+                .Include(u => u.Permissions)
+                .ToListAsync();
+
+            _logger?.LogInformation($"加载了 {users.Count} 个用户");
+
+            // 更新 UI
+            UsersDataGrid.ItemsSource = users;
+            PermissionsDataGrid.ItemsSource = null;
+
+            MessageBox.Show($"成功加载 {users.Count} 个用户!", "成功", MessageBoxButton.OK, MessageBoxImage.Information);
+        }
+        catch (Exception ex)
+        {
+            _logger?.LogError(ex, "加载数据失败");
+            MessageBox.Show($"加载数据失败: {ex.Message}\n\n详细信息:\n{ex.ToString()}", "错误", MessageBoxButton.OK, MessageBoxImage.Error);
+        }
+    }
+
+    private void UsersDataGrid_SelectionChanged(object sender, System.Windows.Controls.SelectionChangedEventArgs e)
+    {
+        if (UsersDataGrid.SelectedItem is UserInfo selectedUser)
+        {
+            _logger?.LogInformation($"选中用户: {selectedUser.UserName}, 权限数: {selectedUser.Permissions.Count}");
+            PermissionsDataGrid.ItemsSource = selectedUser.Permissions;
+        }
+        else
+        {
+            PermissionsDataGrid.ItemsSource = null;
+        }
+    }
+
+    /// <summary>
+    /// 创建 Access 数据库上下文（使用新的统一配置体系）
+    /// </summary>
+    private AccessDbContext CreateDbContext()
+    {
+        // 获取数据库文件的完整路径
+        var dbPath = Path.GetFullPath(DatabaseFile);
+
+        if (!File.Exists(dbPath))
+        {
+            throw new FileNotFoundException($"找不到 Access 数据库文件: {dbPath}");
+        }
+
+        // 使用统一的配置方式构建连接字符串
+        var builder = new OleDbConnectionStringBuilder
+        {
+            ["Provider"] = AccessProviderNames.AceOleDb16,  // 使用 16.0
+            ["Data Source"] = dbPath
+            // Connect Timeout 在某些情况下不稳定，已移除
+        };
+
+        // 如果数据库有密码，可以在这里设置：
+        // builder["Jet OLEDB:Database Password"] = "your_password";
+
+        var connectionString = builder.ConnectionString;
+
+        // 创建 DbContext 选项
+        var optionsBuilder = new DbContextOptionsBuilder<AccessDbContext>();
+        optionsBuilder.UseJet(connectionString);
+
+        return new AccessDbContext(optionsBuilder.Options);
+    }
+}

src/Sharp/Server/Views/AccessDatabaseWindowOleDb.xaml

@@ -0,0 +1,76 @@
+<Window x:Class="Server.Views.AccessDatabaseWindowOleDb"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        Title="Access 数据库管理 (OleDb方式)" Height="700" Width="1000"
+        WindowStartupLocation="CenterScreen">
+    <Grid Margin="10">
+        <Grid.RowDefinitions>
+            <RowDefinition Height="Auto"/>
+            <RowDefinition Height="Auto"/>
+            <RowDefinition Height="*"/>
+            <RowDefinition Height="Auto"/>
+            <RowDefinition Height="200"/>
+            <RowDefinition Height="Auto"/>
+        </Grid.RowDefinitions>
+
+        <!-- 标题和操作栏 -->
+        <StackPanel Grid.Row="0" Orientation="Horizontal" Margin="0,0,0,10">
+            <TextBlock Text="Access 数据库管理" FontSize="20" FontWeight="Bold" VerticalAlignment="Center"/>
+            <TextBlock Text=" (System.Data.OleDb)" FontSize="14" Foreground="Green" VerticalAlignment="Center" Margin="5,0,0,0"/>
+            <Button Content="刷新数据" Click="RefreshButton_Click" Margin="20,0,0,0" Padding="10,5"/>
+            <Button Content="测试连接" Click="TestConnectionButton_Click" Margin="10,0,0,0" Padding="10,5"/>
+        </StackPanel>
+
+        <!-- 用户操作区 -->
+        <GroupBox Grid.Row="1" Header="用户操作" Margin="0,0,0,10">
+            <StackPanel Orientation="Horizontal" Margin="5">
+                <TextBlock Text="用户名:" VerticalAlignment="Center" Margin="0,0,5,0"/>
+                <TextBox x:Name="UserNameTextBox" Width="150" Margin="0,0,10,0"/>
+                <TextBlock Text="密码:" VerticalAlignment="Center" Margin="0,0,5,0"/>
+                <TextBox x:Name="PasswordTextBox" Width="150" Margin="0,0,20,0"/>
+                <Button Content="添加用户" Click="AddUserButton_Click" Padding="10,5" Margin="0,0,5,0" Background="#4CAF50" Foreground="White"/>
+                <Button Content="修改密码" Click="UpdatePasswordButton_Click" Padding="10,5" Margin="0,0,5,0" Background="#FF9800" Foreground="White"/>
+                <Button Content="删除用户" Click="DeleteUserButton_Click" Padding="10,5" Background="#F44336" Foreground="White"/>
+            </StackPanel>
+        </GroupBox>
+
+        <!-- 用户列表 -->
+        <GroupBox Grid.Row="2" Header="用户列表" Margin="0,0,0,10">
+            <DataGrid x:Name="UsersDataGrid"
+                      AutoGenerateColumns="False"
+                      IsReadOnly="True"
+                      SelectionMode="Single"
+                      SelectionChanged="UsersDataGrid_SelectionChanged">
+                <DataGrid.Columns>
+                    <DataGridTextColumn Header="用户名" Binding="{Binding UserName}" Width="200"/>
+                    <DataGridTextColumn Header="密码" Binding="{Binding Password}" Width="*"/>
+                    <DataGridTextColumn Header="权限数量" Binding="{Binding PermissionCount}" Width="100"/>
+                </DataGrid.Columns>
+            </DataGrid>
+        </GroupBox>
+
+        <!-- 分隔符 -->
+        <GridSplitter Grid.Row="3" Height="5" HorizontalAlignment="Stretch" Background="LightGray"/>
+
+        <!-- 权限列表 -->
+        <GroupBox Grid.Row="4" Header="选中用户的权限">
+            <DataGrid x:Name="PermissionsDataGrid"
+                      AutoGenerateColumns="False"
+                      IsReadOnly="True">
+                <DataGrid.Columns>
+                    <DataGridTextColumn Header="权限代码" Binding="{Binding Permission_Code}" Width="*"/>
+                </DataGrid.Columns>
+            </DataGrid>
+        </GroupBox>
+
+        <!-- 权限操作区 -->
+        <GroupBox Grid.Row="5" Header="权限操作" Margin="0,10,0,0">
+            <StackPanel Orientation="Horizontal" Margin="5">
+                <TextBlock Text="权限代码:" VerticalAlignment="Center" Margin="0,0,5,0"/>
+                <TextBox x:Name="PermissionCodeTextBox" Width="200" Margin="0,0,20,0"/>
+                <Button Content="添加权限" Click="AddPermissionButton_Click" Padding="10,5" Margin="0,0,5,0" Background="#4CAF50" Foreground="White"/>
+                <Button Content="删除权限" Click="DeletePermissionButton_Click" Padding="10,5" Background="#F44336" Foreground="White"/>
+            </StackPanel>
+        </GroupBox>
+    </Grid>
+</Window>

src/Sharp/Server/Views/AccessDatabaseWindowOleDb.xaml.cs

@@ -0,0 +1,560 @@
+using System;
+using System.Collections.Generic;
+using System.Data.OleDb;
+using System.Linq;
+using System.Windows;
+using Microsoft.Extensions.Logging;
+using Sharp.Data.Access;
+
+namespace Server.Views;
+
+/// <summary>
+/// 使用 AccessDataService 访问 Access 数据库（推荐方式）
+/// 包含完整的增删改查功能
+/// </summary>
+public partial class AccessDatabaseWindowOleDb : Window
+{
+    private readonly IAccessDataService? _accessDataService;
+    private readonly ILogger<AccessDatabaseWindowOleDb>? _logger;
+    private string? _selectedUserName;
+
+    public AccessDatabaseWindowOleDb()
+    {
+        InitializeComponent();
+
+        try
+        {
+            var app = (App)Application.Current;
+            _logger = app.LoggerFactory?.CreateLogger<AccessDatabaseWindowOleDb>();
+            _accessDataService = app.AccessDataService;
+
+            if (_accessDataService == null)
+            {
+                _logger?.LogWarning("AccessDataService 未初始化");
+                MessageBox.Show("Access 数据服务未初始化，某些功能可能不可用", "警告",
+                    MessageBoxButton.OK, MessageBoxImage.Warning);
+            }
+
+            Loaded += Window_Loaded;
+        }
+        catch (Exception ex)
+        {
+            MessageBox.Show($"初始化失败: {ex.Message}", "错误",
+                MessageBoxButton.OK, MessageBoxImage.Error);
+        }
+    }
+
+    private async void Window_Loaded(object sender, RoutedEventArgs e)
+    {
+        await Task.Run(() => LoadData());
+    }
+
+    #region 基础操作
+
+    private async void RefreshButton_Click(object sender, RoutedEventArgs e)
+    {
+        await Task.Run(() => LoadData());
+    }
+
+    private async void TestConnectionButton_Click(object sender, RoutedEventArgs e)
+    {
+        if (_accessDataService == null)
+        {
+            MessageBox.Show("Access 数据服务未初始化", "错误",
+                MessageBoxButton.OK, MessageBoxImage.Error);
+            return;
+        }
+
+        try
+        {
+            _logger?.LogInformation("测试 Access 数据库连接...");
+            var success = await Task.Run(() => _accessDataService.TestConnection());
+
+            if (success)
+            {
+                _logger?.LogInformation("数据库连接成功!");
+                MessageBox.Show("数据库连接成功!", "成功",
+                    MessageBoxButton.OK, MessageBoxImage.Information);
+            }
+            else
+            {
+                MessageBox.Show("数据库连接失败", "错误",
+                    MessageBoxButton.OK, MessageBoxImage.Error);
+            }
+        }
+        catch (Exception ex)
+        {
+            _logger?.LogError(ex, "测试连接失败");
+            MessageBox.Show($"测试连接失败: {ex.Message}", "错误",
+                MessageBoxButton.OK, MessageBoxImage.Error);
+        }
+    }
+
+    #endregion
+
+    #region 用户管理（增删改查）
+
+    /// <summary>
+    /// 添加用户
+    /// </summary>
+    private async void AddUserButton_Click(object sender, RoutedEventArgs e)
+    {
+        if (_accessDataService == null) return;
+
+        var userName = UserNameTextBox.Text.Trim();
+        var password = PasswordTextBox.Text.Trim();
+
+        if (string.IsNullOrEmpty(userName))
+        {
+            MessageBox.Show("请输入用户名", "提示",
+                MessageBoxButton.OK, MessageBoxImage.Warning);
+            return;
+        }
+
+        if (string.IsNullOrEmpty(password))
+        {
+            MessageBox.Show("请输入密码", "提示",
+                MessageBoxButton.OK, MessageBoxImage.Warning);
+            return;
+        }
+
+        try
+        {
+            await Task.Run(() =>
+            {
+                // 检查用户是否已存在
+                var count = _accessDataService.ExecuteScalar(
+                    "SELECT COUNT(*) FROM UserInfo WHERE UserName = ?",
+                    new OleDbParameter("@UserName", userName));
+
+                if (Convert.ToInt32(count) > 0)
+                {
+                    Dispatcher.Invoke(() =>
+                    {
+                        MessageBox.Show($"用户 '{userName}' 已存在!", "警告",
+                            MessageBoxButton.OK, MessageBoxImage.Warning);
+                    });
+                    return;
+                }
+
+                // 插入新用户
+                _accessDataService.Execute(
+                    "INSERT INTO UserInfo (UserName, [Password]) VALUES (?, ?)",
+                    new OleDbParameter("@UserName", userName),
+                    new OleDbParameter("@Password", password));
+
+                _logger?.LogInformation($"成功添加用户: {userName}");
+
+                Dispatcher.Invoke(() =>
+                {
+                    MessageBox.Show($"成功添加用户 '{userName}'!", "成功",
+                        MessageBoxButton.OK, MessageBoxImage.Information);
+
+                    UserNameTextBox.Clear();
+                    PasswordTextBox.Clear();
+                });
+
+                LoadData();
+            });
+        }
+        catch (Exception ex)
+        {
+            _logger?.LogError(ex, "添加用户失败");
+            MessageBox.Show($"添加用户失败: {ex.Message}", "错误",
+                MessageBoxButton.OK, MessageBoxImage.Error);
+        }
+    }
+
+    /// <summary>
+    /// 修改用户密码
+    /// </summary>
+    private async void UpdatePasswordButton_Click(object sender, RoutedEventArgs e)
+    {
+        if (_accessDataService == null) return;
+
+        var userName = UserNameTextBox.Text.Trim();
+        var newPassword = PasswordTextBox.Text.Trim();
+
+        if (string.IsNullOrEmpty(userName))
+        {
+            MessageBox.Show("请输入用户名或从列表中选择用户", "提示",
+                MessageBoxButton.OK, MessageBoxImage.Warning);
+            return;
+        }
+
+        if (string.IsNullOrEmpty(newPassword))
+        {
+            MessageBox.Show("请输入新密码", "提示",
+                MessageBoxButton.OK, MessageBoxImage.Warning);
+            return;
+        }
+
+        var result = MessageBox.Show(
+            $"确定要修改用户 '{userName}' 的密码吗？",
+            "确认",
+            MessageBoxButton.YesNo,
+            MessageBoxImage.Question);
+
+        if (result != MessageBoxResult.Yes)
+            return;
+
+        try
+        {
+            await Task.Run(() =>
+            {
+                // 更新密码
+                var rowsAffected = _accessDataService.Execute(
+                    "UPDATE UserInfo SET [Password] = ? WHERE UserName = ?",
+                    new OleDbParameter("@Password", newPassword),
+                    new OleDbParameter("@UserName", userName));
+
+                if (rowsAffected == 0)
+                {
+                    Dispatcher.Invoke(() =>
+                    {
+                        MessageBox.Show($"用户 '{userName}' 不存在!", "警告",
+                            MessageBoxButton.OK, MessageBoxImage.Warning);
+                    });
+                    return;
+                }
+
+                _logger?.LogInformation($"成功修改用户 {userName} 的密码");
+
+                Dispatcher.Invoke(() =>
+                {
+                    MessageBox.Show($"成功修改用户 '{userName}' 的密码!", "成功",
+                        MessageBoxButton.OK, MessageBoxImage.Information);
+
+                    PasswordTextBox.Clear();
+                });
+
+                LoadData();
+            });
+        }
+        catch (Exception ex)
+        {
+            _logger?.LogError(ex, "修改密码失败");
+            MessageBox.Show($"修改密码失败: {ex.Message}", "错误",
+                MessageBoxButton.OK, MessageBoxImage.Error);
+        }
+    }
+
+    /// <summary>
+    /// 删除用户
+    /// </summary>
+    private async void DeleteUserButton_Click(object sender, RoutedEventArgs e)
+    {
+        if (_accessDataService == null) return;
+
+        var userName = UserNameTextBox.Text.Trim();
+
+        if (string.IsNullOrEmpty(userName))
+        {
+            MessageBox.Show("请输入用户名或从列表中选择用户", "提示",
+                MessageBoxButton.OK, MessageBoxImage.Warning);
+            return;
+        }
+
+        var result = MessageBox.Show(
+            $"确定要删除用户 '{userName}' 及其所有权限吗？\n此操作不可恢复！",
+            "确认删除",
+            MessageBoxButton.YesNo,
+            MessageBoxImage.Warning);
+
+        if (result != MessageBoxResult.Yes)
+            return;
+
+        try
+        {
+            // 使用事务删除用户及其权限
+            await Task.Run(() =>
+            {
+                _accessDataService.ExecuteInTransaction(transaction =>
+                {
+                    // 先删除用户的所有权限
+                    transaction.Execute(
+                        "DELETE FROM UserPermission WHERE UserInfo_UserName = ?",
+                        new OleDbParameter("@UserName", userName));
+
+                    // 再删除用户
+                    var rowsAffected = transaction.Execute(
+                        "DELETE FROM UserInfo WHERE UserName = ?",
+                        new OleDbParameter("@UserName", userName));
+
+                    if (rowsAffected == 0)
+                    {
+                        throw new InvalidOperationException($"用户 '{userName}' 不存在!");
+                    }
+                });
+
+                _logger?.LogInformation($"成功删除用户: {userName}");
+
+                Dispatcher.Invoke(() =>
+                {
+                    MessageBox.Show($"成功删除用户 '{userName}'!", "成功",
+                        MessageBoxButton.OK, MessageBoxImage.Information);
+
+                    UserNameTextBox.Clear();
+                    PasswordTextBox.Clear();
+                });
+
+                LoadData();
+            });
+        }
+        catch (InvalidOperationException ex)
+        {
+            MessageBox.Show(ex.Message, "警告",
+                MessageBoxButton.OK, MessageBoxImage.Warning);
+        }
+        catch (Exception ex)
+        {
+            _logger?.LogError(ex, "删除用户失败");
+            MessageBox.Show($"删除用户失败: {ex.Message}", "错误",
+                MessageBoxButton.OK, MessageBoxImage.Error);
+        }
+    }
+
+    #endregion
+
+    #region 权限管理
+
+    /// <summary>
+    /// 添加权限
+    /// </summary>
+    private async void AddPermissionButton_Click(object sender, RoutedEventArgs e)
+    {
+        if (_accessDataService == null) return;
+
+        if (string.IsNullOrEmpty(_selectedUserName))
+        {
+            MessageBox.Show("请先选择一个用户", "提示",
+                MessageBoxButton.OK, MessageBoxImage.Warning);
+            return;
+        }
+
+        var permissionCode = PermissionCodeTextBox.Text.Trim();
+        if (string.IsNullOrEmpty(permissionCode))
+        {
+            MessageBox.Show("请输入权限代码", "提示",
+                MessageBoxButton.OK, MessageBoxImage.Warning);
+            return;
+        }
+
+        try
+        {
+            await Task.Run(() =>
+            {
+                // 检查权限是否已存在
+                var count = _accessDataService.ExecuteScalar(
+                    "SELECT COUNT(*) FROM UserPermission WHERE UserInfo_UserName = ? AND Permission_Code = ?",
+                    new OleDbParameter("@UserName", _selectedUserName),
+                    new OleDbParameter("@PermissionCode", permissionCode));
+
+                if (Convert.ToInt32(count) > 0)
+                {
+                    Dispatcher.Invoke(() =>
+                    {
+                        MessageBox.Show($"用户 '{_selectedUserName}' 已拥有权限 '{permissionCode}'!", "警告",
+                            MessageBoxButton.OK, MessageBoxImage.Warning);
+                    });
+                    return;
+                }
+
+                // 插入权限
+                _accessDataService.Execute(
+                    "INSERT INTO UserPermission (UserInfo_UserName, Permission_Code) VALUES (?, ?)",
+                    new OleDbParameter("@UserName", _selectedUserName),
+                    new OleDbParameter("@PermissionCode", permissionCode));
+
+                _logger?.LogInformation($"成功为用户 {_selectedUserName} 添加权限: {permissionCode}");
+
+                Dispatcher.Invoke(() =>
+                {
+                    MessageBox.Show($"成功添加权限 '{permissionCode}'!", "成功",
+                        MessageBoxButton.OK, MessageBoxImage.Information);
+
+                    PermissionCodeTextBox.Clear();
+                    LoadUserPermissions(_selectedUserName);
+                });
+            });
+        }
+        catch (Exception ex)
+        {
+            _logger?.LogError(ex, "添加权限失败");
+            MessageBox.Show($"添加权限失败: {ex.Message}", "错误",
+                MessageBoxButton.OK, MessageBoxImage.Error);
+        }
+    }
+
+    /// <summary>
+    /// 删除权限
+    /// </summary>
+    private async void DeletePermissionButton_Click(object sender, RoutedEventArgs e)
+    {
+        if (_accessDataService == null) return;
+
+        if (string.IsNullOrEmpty(_selectedUserName))
+        {
+            MessageBox.Show("请先选择一个用户", "提示",
+                MessageBoxButton.OK, MessageBoxImage.Warning);
+            return;
+        }
+
+        if (PermissionsDataGrid.SelectedItem is not UserPermissionDto selectedPermission)
+        {
+            MessageBox.Show("请从列表中选择要删除的权限", "提示",
+                MessageBoxButton.OK, MessageBoxImage.Warning);
+            return;
+        }
+
+        var result = MessageBox.Show(
+            $"确定要删除用户 '{_selectedUserName}' 的权限 '{selectedPermission.Permission_Code}' 吗？",
+            "确认删除",
+            MessageBoxButton.YesNo,
+            MessageBoxImage.Question);
+
+        if (result != MessageBoxResult.Yes)
+            return;
+
+        try
+        {
+            await Task.Run(() =>
+            {
+                _accessDataService.Execute(
+                    "DELETE FROM UserPermission WHERE UserInfo_UserName = ? AND Permission_Code = ?",
+                    new OleDbParameter("@UserName", _selectedUserName),
+                    new OleDbParameter("@PermissionCode", selectedPermission.Permission_Code));
+
+                _logger?.LogInformation($"成功删除用户 {_selectedUserName} 的权限: {selectedPermission.Permission_Code}");
+
+                Dispatcher.Invoke(() =>
+                {
+                    MessageBox.Show($"成功删除权限 '{selectedPermission.Permission_Code}'!", "成功",
+                        MessageBoxButton.OK, MessageBoxImage.Information);
+
+                    LoadUserPermissions(_selectedUserName);
+                });
+            });
+        }
+        catch (Exception ex)
+        {
+            _logger?.LogError(ex, "删除权限失败");
+            MessageBox.Show($"删除权限失败: {ex.Message}", "错误",
+                MessageBoxButton.OK, MessageBoxImage.Error);
+        }
+    }
+
+    #endregion
+
+    #region 数据加载
+    private void LoadData()
+    {
+        if (_accessDataService == null) return;
+
+        try
+        {
+            _logger?.LogInformation("开始加载 Access 数据库数据...");
+
+            // 查询所有用户（使用泛型映射）
+            var users = _accessDataService.Query<UserInfoDto>(
+                "SELECT [UserName], [Password] AS [Password] FROM [UserInfo]");
+
+            var userDetails = string.Join(" | ",
+                users.Select(u => $"UserName='{u.UserName}', Password='{u.Password}'"));
+            _logger?.LogInformation("用户列表: {UserDetails}", userDetails);
+
+            // 为每个用户查询权限数量
+            foreach (var user in users)
+            {
+                var count = _accessDataService.ExecuteScalar(
+                    "SELECT COUNT(*) FROM UserPermission WHERE UserInfo_UserName = ?",
+                    new OleDbParameter("@UserName", user.UserName));
+                user.PermissionCount = Convert.ToInt32(count);
+            }
+
+            _logger?.LogInformation($"加载了 {users.Count} 个用户");
+
+            // 更新 UI（需要在 UI 线程上执行）
+            Dispatcher.Invoke(() =>
+            {
+                UsersDataGrid.ItemsSource = users;
+                PermissionsDataGrid.ItemsSource = null;
+                _selectedUserName = null;
+            });
+        }
+        catch (Exception ex)
+        {
+            _logger?.LogError(ex, "加载数据失败");
+            Dispatcher.Invoke(() =>
+            {
+                MessageBox.Show($"加载数据失败: {ex.Message}", "错误",
+                    MessageBoxButton.OK, MessageBoxImage.Error);
+            });
+        }
+    }
+
+    private void UsersDataGrid_SelectionChanged(object sender, System.Windows.Controls.SelectionChangedEventArgs e)
+    {
+        if (UsersDataGrid.SelectedItem is UserInfoDto selectedUser)
+        {
+            _selectedUserName = selectedUser.UserName;
+            UserNameTextBox.Text = selectedUser.UserName;
+            PasswordTextBox.Text = selectedUser.Password;
+            LoadUserPermissions(selectedUser.UserName);
+        }
+        else
+        {
+            _selectedUserName = null;
+            PermissionsDataGrid.ItemsSource = null;
+        }
+    }
+
+    private void LoadUserPermissions(string userName)
+    {
+        if (_accessDataService == null) return;
+
+        try
+        {
+            // 查询用户权限（使用泛型映射）
+            var permissions = _accessDataService.Query<UserPermissionDto>(
+                "SELECT Permission_Code FROM UserPermission WHERE UserInfo_UserName = ?",
+                new OleDbParameter("@UserName", userName));
+
+            Dispatcher.Invoke(() =>
+            {
+                PermissionsDataGrid.ItemsSource = permissions;
+            });
+
+            _logger?.LogInformation($"用户 {userName} 有 {permissions.Count} 个权限");
+        }
+        catch (Exception ex)
+        {
+            _logger?.LogError(ex, "加载权限失败");
+            Dispatcher.Invoke(() =>
+            {
+                MessageBox.Show($"加载权限失败: {ex.Message}", "错误",
+                    MessageBoxButton.OK, MessageBoxImage.Error);
+            });
+        }
+    }
+
+    #endregion
+}
+
+/// <summary>
+/// 用户信息 DTO
+/// </summary>
+public class UserInfoDto
+{
+    public string UserName { get; set; } = "";
+    public string Password { get; set; } = "";
+    public int PermissionCount { get; set; }
+}
+
+/// <summary>
+/// 用户权限 DTO
+/// </summary>
+public class UserPermissionDto
+{
+    public string Permission_Code { get; set; } = "";
+}

src/Sharp/Server/appsettings.json

@@ -6,7 +6,7 @@
   },
   "SharpLog": {
     "UseConsole": true,
-    "MinLevel": "Information",
+    "MinLevel": "Debug",
     "File": {
       "Enabled": true,
       "Path": "logs/server-.log",

src/Sharp/Server/logs/server-20251119.log

@@ -0,0 +1,4 @@
+{"Timestamp":"2025-11-19T10:17:05.3241502+08:00","Level":"Information","MessageTemplate":"正在初始化数据库...","RenderedMessage":"正在初始化数据库...","Properties":{"SourceContext":"Server.App","MachineName":"WEIYP","ProcessId":51312,"ThreadId":1,"EnvironmentName":"Production","Application":"SharpServer","Environment":"Production"}}
+{"Timestamp":"2025-11-19T10:17:06.0810621+08:00","Level":"Information","MessageTemplate":"数据库初始化成功","RenderedMessage":"数据库初始化成功","Properties":{"SourceContext":"Server.App","MachineName":"WEIYP","ProcessId":51312,"ThreadId":1,"EnvironmentName":"Production","Application":"SharpServer","Environment":"Production"}}
+{"Timestamp":"2025-11-19T10:17:06.0815557+08:00","Level":"Information","MessageTemplate":"应用程序启动成功","RenderedMessage":"应用程序启动成功","Properties":{"SourceContext":"Server.App","MachineName":"WEIYP","ProcessId":51312,"ThreadId":1,"EnvironmentName":"Production","Application":"SharpServer","Environment":"Production"}}
+{"Timestamp":"2025-11-19T10:21:42.6459518+08:00","Level":"Information","MessageTemplate":"应用程序正常退出","RenderedMessage":"应用程序正常退出","Properties":{"SourceContext":"Server.App","MachineName":"WEIYP","ProcessId":51312,"ThreadId":1,"EnvironmentName":"Production","Application":"SharpServer","Environment":"Production"}}

src/Sharp/Sharp.sln

@@ -39,9 +39,9 @@ Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "Data", "Data\Data.csproj",
 EndProject
 Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "Data.Test", "..\..\test\Data.Test\Data.Test.csproj", "{8EEC8BF4-CF9A-473D-B7A0-005E151C645D}"
 EndProject
-Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "Plc", "Plc\Plc.csproj", "{12FA0DCD-A69B-4862-901C-A8CF8694B9E3}"
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "Data.Access", "Data.Access\Data.Access.csproj", "{944051DB-AAB1-4502-9AF6-B496EA8FD737}"
 EndProject
-Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "Plc.Siemens", "Plc.Siemens\Plc.Siemens.csproj", "{7C877AB8-1938-4CC7-8692-0D2253C728DF}"
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "Data.Access.Test", "..\..\test\Data.Access.Test\Data.Access.Test.csproj", "{48A70F46-8764-4FEA-BAFA-42776B0B526F}"
 EndProject
 Global
 	GlobalSection(SolutionConfigurationPlatforms) = preSolution
@@ -121,14 +121,14 @@ Global
 		{8EEC8BF4-CF9A-473D-B7A0-005E151C645D}.Debug|Any CPU.Build.0 = Debug|Any CPU
 		{8EEC8BF4-CF9A-473D-B7A0-005E151C645D}.Release|Any CPU.ActiveCfg = Release|Any CPU
 		{8EEC8BF4-CF9A-473D-B7A0-005E151C645D}.Release|Any CPU.Build.0 = Release|Any CPU
-		{12FA0DCD-A69B-4862-901C-A8CF8694B9E3}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
-		{12FA0DCD-A69B-4862-901C-A8CF8694B9E3}.Debug|Any CPU.Build.0 = Debug|Any CPU
-		{12FA0DCD-A69B-4862-901C-A8CF8694B9E3}.Release|Any CPU.ActiveCfg = Release|Any CPU
-		{12FA0DCD-A69B-4862-901C-A8CF8694B9E3}.Release|Any CPU.Build.0 = Release|Any CPU
-		{7C877AB8-1938-4CC7-8692-0D2253C728DF}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
-		{7C877AB8-1938-4CC7-8692-0D2253C728DF}.Debug|Any CPU.Build.0 = Debug|Any CPU
-		{7C877AB8-1938-4CC7-8692-0D2253C728DF}.Release|Any CPU.ActiveCfg = Release|Any CPU
-		{7C877AB8-1938-4CC7-8692-0D2253C728DF}.Release|Any CPU.Build.0 = Release|Any CPU
+		{944051DB-AAB1-4502-9AF6-B496EA8FD737}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{944051DB-AAB1-4502-9AF6-B496EA8FD737}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{944051DB-AAB1-4502-9AF6-B496EA8FD737}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{944051DB-AAB1-4502-9AF6-B496EA8FD737}.Release|Any CPU.Build.0 = Release|Any CPU
+		{48A70F46-8764-4FEA-BAFA-42776B0B526F}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{48A70F46-8764-4FEA-BAFA-42776B0B526F}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{48A70F46-8764-4FEA-BAFA-42776B0B526F}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{48A70F46-8764-4FEA-BAFA-42776B0B526F}.Release|Any CPU.Build.0 = Release|Any CPU
 	EndGlobalSection
 	GlobalSection(SolutionProperties) = preSolution
 		HideSolutionNode = FALSE

src/Sharp/Wpf/Exceptions/ExceptionHandlingOptions.cs

@@ -15,7 +15,7 @@ public sealed class ExceptionHandlingOptions
     public bool RethrowAfterHandle { get; set; } = false;
 
     /// <summary>
-    /// Custom logger hook.
+    /// 日志钩子.
     /// </summary>
     public Action<Exception>? Log { get; set; }
         = ex => System.Diagnostics.Debug.WriteLine(ex.ToString());

src/Sharp/Wpf/Exceptions/IUiExceptionHandler.cs

@@ -1,4 +1,5 @@
 using System;
+using System.Net.Http;
 
 namespace Sharp.Wpf.Exceptions;
 

src/Sharp/Wpf/Exceptions/UiExceptionHandler.cs

@@ -1,4 +1,5 @@
 using System;
+using System.Net.Http;
 using System.Threading.Tasks;
 using WpfMessageBox = System.Windows.MessageBox;
 
@@ -35,6 +36,10 @@ public sealed class UiExceptionHandler : IUiExceptionHandler
     private void OnDispatcherUnhandledException(object sender, System.Windows.Threading.DispatcherUnhandledExceptionEventArgs e)
     {
         Handle(e.Exception);
+        if (CanRecover(e.Exception))
+        {
+            e.Handled = true;
+        }
         e.Handled = true;
     }
 
@@ -86,4 +91,20 @@ public sealed class UiExceptionHandler : IUiExceptionHandler
             }
         }
     }
+    
+    
+    protected bool CanRecover(Exception exception)
+    {
+        return exception switch
+        {
+            ArgumentException => true,
+            InvalidOperationException => true,
+            HttpRequestException => true,
+            TimeoutException => true,
+            OutOfMemoryException => false,
+            StackOverflowException => false,
+            AccessViolationException => false,
+            _ => true
+        };
+    }
 }

src/Sharp/Wpf/obj/Debug/net8.0-windows/Wpf.AssemblyInfo.cs

@@ -1,10 +1,9 @@
 //------------------------------------------------------------------------------
 // <auto-generated>
-//     此代码由工具生成。
-//     运行时版本:4.0.30319.42000
+//     This code was generated by a tool.
 //
-//     对此文件的更改可能会导致不正确的行为，并且如果
-//     重新生成代码，这些更改将会丢失。
+//     Changes to this file may cause incorrect behavior and will be lost if
+//     the code is regenerated.
 // </auto-generated>
 //------------------------------------------------------------------------------
 
@@ -14,7 +13,7 @@ using System.Reflection;
 [assembly: System.Reflection.AssemblyCompanyAttribute("Sharp.Wpf")]
 [assembly: System.Reflection.AssemblyConfigurationAttribute("Debug")]
 [assembly: System.Reflection.AssemblyFileVersionAttribute("1.0.0.0")]
-[assembly: System.Reflection.AssemblyInformationalVersionAttribute("1.0.0+53d1dd2dbf05d818528814223b58610a790fcb26")]
+[assembly: System.Reflection.AssemblyInformationalVersionAttribute("1.0.0+e334e65c2d8abbef0063f92b88e6672859b4ea19")]
 [assembly: System.Reflection.AssemblyProductAttribute("Sharp.Wpf")]
 [assembly: System.Reflection.AssemblyTitleAttribute("Sharp.Wpf")]
 [assembly: System.Reflection.AssemblyVersionAttribute("1.0.0.0")]

src/Sharp/Wpf/obj/Debug/net8.0-windows/Wpf.AssemblyInfoInputs.cache

@@ -1 +1 @@
-fbdba11393faed768ef4c9b8f4eccef99aed87397a79576b900953e4aad05633
+b6ad12dd3a3fcd3e5222848b29876246dac97d6908271610ecbcd090928adcb7

src/Sharp/Wpf/obj/Wpf.csproj.nuget.dgspec.json

@@ -70,11 +70,6 @@
           },
           "runtimeIdentifierGraphPath": "C:\\Program Files\\dotnet\\sdk\\9.0.203/PortableRuntimeIdentifierGraph.json"
         }
-      },
-      "runtimes": {
-        "win-x64": {
-          "#import": []
-        }
       }
     }
   }

src/Sharp/Wpf/obj/project.assets.json

@@ -1,8 +1,7 @@
 {
   "version": 3,
   "targets": {
-    "net8.0-windows7.0": {},
-    "net8.0-windows7.0/win-x64": {}
+    "net8.0-windows7.0": {}
   },
   "libraries": {},
   "projectFileDependencyGroups": {
@@ -78,11 +77,6 @@
         },
         "runtimeIdentifierGraphPath": "C:\\Program Files\\dotnet\\sdk\\9.0.203/PortableRuntimeIdentifierGraph.json"
       }
-    },
-    "runtimes": {
-      "win-x64": {
-        "#import": []
-      }
     }
   }
 }

src/Sharp/Wpf/obj/project.nuget.cache

@@ -1,6 +1,6 @@
 {
   "version": 2,
-  "dgSpecHash": "9ZityDkLrvk=",
+  "dgSpecHash": "EQ+I1wXrehg=",
   "success": true,
   "projectFilePath": "D:\\yuanll\\sharp-basic\\src\\Sharp\\Wpf\\Wpf.csproj",
   "expectedPackageFiles": [],

src/Sharp/Wpf/obj/rider.project.model.nuget.info

@@ -1 +1 @@
-17634268840015055
+17634526945569668

src/Sharp/Wpf/obj/rider.project.restore.info

@@ -1 +1 @@
-17633637013370903
+17634577083448171

test/Data.Access.Test/AccessConnectionStringFactoryTests.cs

@@ -0,0 +1,74 @@
+using System;
+using System.IO;
+using Microsoft.Extensions.DependencyInjection;
+using Microsoft.VisualStudio.TestTools.UnitTesting;
+using Sharp.Data.Access;
+using Sharp.Data.Access.DependencyInjection;
+using Sharp.Data.Access.Options;
+using Sharp.Data.Access.Security;
+using Sharp.Data.Access.Connections;
+
+namespace Data.Access.Test;
+
+[TestClass]
+public sealed class AccessConnectionStringFactoryTests
+{
+    [TestMethod]
+    public void Create_UsesDecryptedPasswordAndAdditionalParameters()
+    {
+        var tempDirectory = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString("N"));
+        Directory.CreateDirectory(tempDirectory);
+
+        var options = new AccessDatabaseOptions
+        {
+            DatabaseFile = "data/app.accdb",
+            DataDirectory = tempDirectory,
+            EncryptedPassword = "encrypted-secret",
+            ProviderName = AccessProviderNames.AceOleDb12
+        };
+        options.AdditionalParameters["Jet OLEDB:Database Locking Mode"] = "1";
+
+        var decryptor = new FakeDecryptor("plain-text");
+
+        var services = new ServiceCollection();
+        services.AddSingleton<IAccessPasswordDecryptor>(decryptor);
+        services.AddAccessDataContext<FakeContext>(ctx =>
+        {
+            ctx.Database.ConnectionString = $"Provider={AccessProviderNames.AceOleDb16};Data Source=fake;";
+        }, registerDataContext: false);
+
+        var provider = services.BuildServiceProvider();
+        var factory = provider.GetRequiredService<IAccessConnectionStringFactory>();
+
+        var connectionString = factory.Create(options, provider);
+        var expectedPath = Path.GetFullPath(Path.Combine(tempDirectory, "data", "app.accdb"));
+
+        StringAssert.Contains(connectionString, $"Provider={AccessProviderNames.AceOleDb12}", "Provider should be set.");
+        StringAssert.Contains(connectionString, expectedPath, "Database path should be resolved to absolute path.");
+        StringAssert.Contains(connectionString, "Jet OLEDB:Database Password=plain-text", "Decrypted password should be used.");
+        StringAssert.Contains(connectionString, "Jet OLEDB:Database Locking Mode=1", "Additional parameters should be appended.");
+        Assert.AreEqual("encrypted-secret", decryptor.LastValue, "Decryptor should receive encrypted value.");
+    }
+
+    private sealed class FakeDecryptor : IAccessPasswordDecryptor
+    {
+        private readonly string? _result;
+
+        public FakeDecryptor(string? result) => _result = result;
+
+        public string? LastValue { get; private set; }
+
+        public string? Decrypt(string? encryptedPassword)
+        {
+            LastValue = encryptedPassword;
+            return _result;
+        }
+    }
+
+    private sealed class FakeContext : Microsoft.EntityFrameworkCore.DbContext
+    {
+        public FakeContext(Microsoft.EntityFrameworkCore.DbContextOptions<FakeContext> options) : base(options)
+        {
+        }
+    }
+}

test/Data.Access.Test/AccessDatabaseInitializerTests.cs

@@ -0,0 +1,82 @@
+using System;
+using System.IO;
+using Microsoft.Extensions.DependencyInjection;
+using Microsoft.VisualStudio.TestTools.UnitTesting;
+using Sharp.Data.Access;
+using Sharp.Data.Access.DependencyInjection;
+using Sharp.Data.Access.Initialization;
+using Sharp.Data.Access.Options;
+
+namespace Data.Access.Test;
+
+[TestClass]
+public sealed class AccessDatabaseInitializerTests
+{
+    [TestMethod]
+    public void EnsureDatabase_CopiesTemplateWhenMissing()
+    {
+        var tempRoot = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString("N"));
+        Directory.CreateDirectory(tempRoot);
+
+        var templateDir = Path.Combine(tempRoot, "template");
+        Directory.CreateDirectory(templateDir);
+
+        var templatePath = Path.Combine(templateDir, "seed.accdb");
+        File.WriteAllText(templatePath, "seed-data");
+
+        var options = new AccessDatabaseOptions
+        {
+            DatabaseFile = "db/app.accdb",
+            TemplateFile = "template/seed.accdb",
+            DataDirectory = tempRoot,
+            CopyTemplateWhenMissing = true,
+            ThrowIfMissing = true
+        };
+
+        var services = BuildServices();
+        var initializer = services.GetRequiredService<IAccessDatabaseInitializer>();
+        initializer.EnsureDatabase(options, services);
+
+        var targetPath = Path.Combine(tempRoot, "db", "app.accdb");
+        Assert.IsTrue(File.Exists(targetPath), "Database file should be created from template.");
+        Assert.AreEqual("seed-data", File.ReadAllText(targetPath));
+    }
+
+    [TestMethod]
+    public void EnsureDatabase_ThrowsWhenMissingAndNoTemplate()
+    {
+        var tempRoot = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString("N"));
+        Directory.CreateDirectory(tempRoot);
+
+        var options = new AccessDatabaseOptions
+        {
+            DatabaseFile = "missing/app.accdb",
+            DataDirectory = tempRoot,
+            CopyTemplateWhenMissing = false,
+            ThrowIfMissing = true
+        };
+
+        var services = BuildServices();
+        var initializer = services.GetRequiredService<IAccessDatabaseInitializer>();
+        Assert.ThrowsException<FileNotFoundException>(() =>
+            initializer.EnsureDatabase(options, services));
+    }
+
+    private static ServiceProvider BuildServices()
+    {
+        var services = new ServiceCollection();
+        services.AddAccessDataContext<FakeContext>(ctx =>
+        {
+            ctx.Database.ConnectionString = $"Provider={AccessProviderNames.AceOleDb16};Data Source=fake;";
+        }, registerDataContext: false);
+
+        return services.BuildServiceProvider();
+    }
+
+    private sealed class FakeContext : Microsoft.EntityFrameworkCore.DbContext
+    {
+        public FakeContext(Microsoft.EntityFrameworkCore.DbContextOptions<FakeContext> options) : base(options)
+        {
+        }
+    }
+}

test/Data.Access.Test/AccessServiceCollectionExtensionsTests.cs

@@ -0,0 +1,49 @@
+using System;
+using Microsoft.EntityFrameworkCore;
+using Microsoft.Extensions.DependencyInjection;
+using Microsoft.VisualStudio.TestTools.UnitTesting;
+using Sharp.Data;
+using Sharp.Data.Access;
+using Sharp.Data.Access.DependencyInjection;
+using Sharp.Data.Access.Options;
+
+namespace Data.Access.Test;
+
+[TestClass]
+public sealed class AccessServiceCollectionExtensionsTests
+{
+    [TestMethod]
+    public void AddAccessDataContext_RegistersFactoryAndOptions()
+    {
+        var services = new ServiceCollection();
+        services.AddAccessDataContext<FakeContext>(options =>
+        {
+            options.Database.ConnectionString = $"Provider={AccessProviderNames.AceOleDb16};Data Source=fake;";
+            options.ConfigureDataContext = (sp, builder) =>
+            {
+                builder.UseAudit(false)
+                    .UseSoftDelete(false)
+                    .UseAutoMigration(false)
+                    .EnableDetailedErrors(false);
+            };
+        }, registerDataContext: false);
+
+        var provider = services.BuildServiceProvider();
+
+        var options = provider.GetRequiredService<AccessContextOptions<FakeContext>>();
+        Assert.AreEqual($"Provider={AccessProviderNames.AceOleDb16};Data Source=fake;", options.Database.ConnectionString);
+
+        var decryptor = provider.GetRequiredService<Sharp.Data.Access.Security.IAccessPasswordDecryptor>();
+        Assert.IsInstanceOfType(decryptor, typeof(Sharp.Data.Access.Security.PassthroughAccessPasswordDecryptor));
+
+        var factory = provider.GetRequiredService<IAccessDataContextFactory<FakeContext>>();
+        Assert.IsNotNull(factory);
+    }
+
+    private sealed class FakeContext : DbContext
+    {
+        public FakeContext(DbContextOptions<FakeContext> options) : base(options)
+        {
+        }
+    }
+}

test/Data.Access.Test/Data.Access.Test.csproj

@@ -0,0 +1,33 @@
+<Project Sdk="Microsoft.NET.Sdk">
+
+    <PropertyGroup>
+        <TargetFramework>net8.0</TargetFramework>
+        <LangVersion>latest</LangVersion>
+        <ImplicitUsings>enable</ImplicitUsings>
+        <Nullable>enable</Nullable>
+    </PropertyGroup>
+
+    <ItemGroup>
+        <PackageReference Include="Microsoft.NET.Test.Sdk" Version="17.12.0"/>
+        <PackageReference Include="MSTest" Version="3.6.4"/>
+        <PackageReference Include="EntityFrameworkCore.Jet" Version="8.0.0-preview1" />
+        <PackageReference Include="System.Data.OleDb" Version="8.0.0" />
+    </ItemGroup>
+
+    <ItemGroup>
+        <Using Include="Microsoft.VisualStudio.TestTools.UnitTesting"/>
+    </ItemGroup>
+
+    <ItemGroup>
+        <ProjectReference Include="..\..\src\Sharp\Data.Access\Data.Access.csproj" />
+        <ProjectReference Include="..\..\src\Sharp\Data\Data.csproj" />
+        <ProjectReference Include="..\..\src\Sharp\Common\Common.csproj" />
+    </ItemGroup>
+
+    <ItemGroup>
+        <None Update="dbDwDmsSetup.accdb">
+            <CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory>
+        </None>
+    </ItemGroup>
+
+</Project>

test/Data.Access.Test/Entities/AccessDbContext.cs

@@ -0,0 +1,44 @@
+using Microsoft.EntityFrameworkCore;
+
+namespace Data.Access.Test.Entities;
+
+/// <summary>
+/// 真实 Access 数据库的 DbContext
+/// </summary>
+public class AccessDbContext : DbContext
+{
+    public AccessDbContext(DbContextOptions<AccessDbContext> options) : base(options)
+    {
+    }
+
+    public DbSet<UserInfoEntity> UserInfos => Set<UserInfoEntity>();
+    public DbSet<UserPermissionEntity> UserPermissions => Set<UserPermissionEntity>();
+
+    protected override void OnModelCreating(ModelBuilder modelBuilder)
+    {
+        base.OnModelCreating(modelBuilder);
+
+        // 配置 UserInfo
+        modelBuilder.Entity<UserInfoEntity>(entity =>
+        {
+            entity.HasKey(e => e.UserName);
+            entity.Property(e => e.UserName).IsRequired().HasMaxLength(255);
+            entity.Property(e => e.Password).IsRequired().HasMaxLength(255);
+        });
+
+        // 配置 UserPermission
+        modelBuilder.Entity<UserPermissionEntity>(entity =>
+        {
+            // 复合主键
+            entity.HasKey(e => new { e.UserInfo_UserName, e.Permission_Code });
+            entity.Property(e => e.UserInfo_UserName).IsRequired().HasMaxLength(255);
+            entity.Property(e => e.Permission_Code).IsRequired().HasMaxLength(255);
+
+            // 配置关系
+            entity.HasOne(e => e.UserInfo)
+                .WithMany(u => u.Permissions)
+                .HasForeignKey(e => e.UserInfo_UserName)
+                .OnDelete(DeleteBehavior.Cascade);
+        });
+    }
+}

test/Data.Access.Test/Entities/UserInfoEntity.cs

@@ -0,0 +1,31 @@
+using System.ComponentModel.DataAnnotations;
+using System.ComponentModel.DataAnnotations.Schema;
+
+namespace Data.Access.Test.Entities;
+
+/// <summary>
+/// UserInfo 表的实体映射
+/// </summary>
+[Table("UserInfo")]
+public class UserInfoEntity
+{
+    /// <summary>
+    /// 用户名 (主键)
+    /// </summary>
+    [Key]
+    [Required]
+    [MaxLength(255)]
+    public string UserName { get; set; } = string.Empty;
+
+    /// <summary>
+    /// 密码
+    /// </summary>
+    [Required]
+    [MaxLength(255)]
+    public string Password { get; set; } = string.Empty;
+
+    /// <summary>
+    /// 用户权限 (导航属性)
+    /// </summary>
+    public ICollection<UserPermissionEntity> Permissions { get; set; } = new List<UserPermissionEntity>();
+}

test/Data.Access.Test/Entities/UserPermissionEntity.cs

@@ -0,0 +1,31 @@
+using System.ComponentModel.DataAnnotations;
+using System.ComponentModel.DataAnnotations.Schema;
+
+namespace Data.Access.Test.Entities;
+
+/// <summary>
+/// UserPermission 表的实体映射
+/// </summary>
+[Table("UserPermission")]
+public class UserPermissionEntity
+{
+    /// <summary>
+    /// 用户名 (外键)
+    /// </summary>
+    [Required]
+    [MaxLength(255)]
+    public string UserInfo_UserName { get; set; } = string.Empty;
+
+    /// <summary>
+    /// 权限代码
+    /// </summary>
+    [Required]
+    [MaxLength(255)]
+    public string Permission_Code { get; set; } = string.Empty;
+
+    /// <summary>
+    /// 用户信息 (导航属性)
+    /// </summary>
+    [ForeignKey(nameof(UserInfo_UserName))]
+    public UserInfoEntity? UserInfo { get; set; }
+}

test/Data.Access.Test/MSTestSettings.cs

@@ -0,0 +1 @@
+[assembly: Parallelize(Scope = ExecutionScope.MethodLevel)]

test/Data.Access.Test/RealAccessDatabaseIntegrationTests.cs

@@ -0,0 +1,193 @@
+using System;
+using System.Linq;
+using System.Threading.Tasks;
+using Microsoft.EntityFrameworkCore;
+using Microsoft.Extensions.DependencyInjection;
+using Microsoft.VisualStudio.TestTools.UnitTesting;
+using Sharp.Data;
+using Sharp.Data.Access.DependencyInjection;
+using Sharp.Data.Access.Extensions;
+using Sharp.Data.Context;
+using Data.Access.Test.Entities;
+
+namespace Data.Access.Test;
+
+/// <summary>
+/// 使用真实 Access 数据库进行 CRUD 操作的完整测试
+/// </summary>
+[TestClass]
+public class RealAccessDatabaseIntegrationTests
+{
+    private const string DatabaseFile = "dbDwDmsSetup.accdb";
+
+    [TestMethod]
+    public async Task CanQueryUsersUsingDataContextBuilder()
+    {
+        // 方式1: 使用 DataContextBuilder (无 DI)
+        var builder = new DataContextBuilder<AccessDbContext>();
+        builder.UseAccessDatabase(options =>
+        {
+            options.DatabaseFile = DatabaseFile;
+            options.CopyTemplateWhenMissing = false;
+            options.ThrowIfMissing = true;
+        }, configure: jet =>
+        {
+            // 禁用自动迁移以避免冲突
+        });
+
+        builder.UseAutoMigration(false); // 禁用自动迁移
+
+        var dataContext = builder.Build();
+
+        // 查询所有用户
+        var users = await dataContext.Repository<UserInfoEntity>().GetAllAsync();
+
+        Console.WriteLine($"找到 {users.Count} 个用户:");
+        foreach (var user in users)
+        {
+            Console.WriteLine($"  - {user.UserName}");
+        }
+
+        Assert.IsTrue(users.Count >= 0, "应该能够查询用户表");
+    }
+
+    [TestMethod]
+    public async Task CanQueryUsersUsingDependencyInjection()
+    {
+        // 方式2: 使用依赖注入
+        var services = new ServiceCollection();
+
+        services.AddAccessDataContext<AccessDbContext>(options =>
+        {
+            options.Database.DatabaseFile = DatabaseFile;
+            options.Database.CopyTemplateWhenMissing = false;
+            options.Database.ThrowIfMissing = true;
+        });
+
+        var provider = services.BuildServiceProvider();
+        var dataContext = provider.GetRequiredService<IDataContext>();
+
+        // 查询所有用户
+        var users = await dataContext.Repository<UserInfoEntity>().GetAllAsync();
+
+        Console.WriteLine($"\n通过 DI 找到 {users.Count} 个用户:");
+        foreach (var user in users)
+        {
+            Console.WriteLine($"  - {user.UserName}");
+        }
+
+        Assert.IsTrue(users.Count >= 0, "应该能够通过 DI 查询用户表");
+    }
+
+    [TestMethod]
+    public async Task CanQueryUserPermissions()
+    {
+        var builder = new DataContextBuilder<AccessDbContext>();
+        builder.UseAccessDatabase(options =>
+        {
+            options.DatabaseFile = DatabaseFile;
+        });
+
+        var dataContext = builder.Build();
+
+        // 查询所有权限
+        var permissions = await dataContext.Repository<UserPermissionEntity>().GetAllAsync();
+
+        Console.WriteLine($"\n找到 {permissions.Count} 个权限记录:");
+        foreach (var perm in permissions.Take(10)) // 只显示前 10 条
+        {
+            Console.WriteLine($"  - 用户: {perm.UserInfo_UserName}, 权限: {perm.Permission_Code}");
+        }
+
+        Assert.IsTrue(permissions.Count >= 0, "应该能够查询权限表");
+    }
+
+    [TestMethod]
+    public async Task CanQueryWithFilters()
+    {
+        var builder = new DataContextBuilder<AccessDbContext>();
+        builder.UseAccessDatabase(options =>
+        {
+            options.DatabaseFile = DatabaseFile;
+        });
+
+        var dataContext = builder.Build();
+
+        // 使用 LINQ 查询
+        var dbContext = dataContext.Context;
+        var adminUsers = await dbContext.Set<UserInfoEntity>()
+            .Where(u => u.UserName.Contains("admin") || u.UserName.Contains("Admin"))
+            .ToListAsync();
+
+        Console.WriteLine($"\n找到 {adminUsers.Count} 个管理员用户:");
+        foreach (var user in adminUsers)
+        {
+            Console.WriteLine($"  - {user.UserName}");
+        }
+    }
+
+    [TestMethod]
+    public async Task CanQueryUserWithPermissions()
+    {
+        var builder = new DataContextBuilder<AccessDbContext>();
+        builder.UseAccessDatabase(options =>
+        {
+            options.DatabaseFile = DatabaseFile;
+        });
+
+        var dataContext = builder.Build();
+        var dbContext = dataContext.Context;
+
+        // 查询用户及其权限
+        var usersWithPermissions = await dbContext.Set<UserInfoEntity>()
+            .Include(u => u.Permissions)
+            .Take(5) // 只取前 5 个用户
+            .ToListAsync();
+
+        Console.WriteLine($"\n查询到 {usersWithPermissions.Count} 个用户及其权限:");
+        foreach (var user in usersWithPermissions)
+        {
+            Console.WriteLine($"  用户: {user.UserName}");
+            Console.WriteLine($"    权限数: {user.Permissions.Count}");
+            foreach (var perm in user.Permissions.Take(3)) // 每个用户只显示前 3 个权限
+            {
+                Console.WriteLine($"      - {perm.Permission_Code}");
+            }
+        }
+    }
+
+    [TestMethod]
+    public async Task CanUseRepositoryPattern()
+    {
+        var builder = new DataContextBuilder<AccessDbContext>();
+        builder.UseAccessDatabase(options =>
+        {
+            options.DatabaseFile = DatabaseFile;
+        });
+
+        var dataContext = builder.Build();
+
+        // 使用 Repository 模式
+        var userRepo = dataContext.Repository<UserInfoEntity>();
+
+        // 获取总数
+        var totalUsers = await userRepo.CountAsync();
+        Console.WriteLine($"\n用户总数: {totalUsers}");
+
+        // 分页查询
+        var pagedResult = await userRepo.GetPagedAsync(1, 10);
+        Console.WriteLine($"第一页 (10条/页): {pagedResult.Items.Count} 条记录");
+
+        // 查询单个用户
+        if (totalUsers > 0)
+        {
+            var firstUser = await userRepo.FirstOrDefaultAsync(u => true);
+            if (firstUser != null)
+            {
+                Console.WriteLine($"第一个用户: {firstUser.UserName}");
+            }
+        }
+
+        Assert.IsTrue(totalUsers >= 0, "应该能够使用 Repository 模式");
+    }
+}

test/Data.Access.Test/RealDatabaseTests.cs

@@ -0,0 +1,134 @@
+using System;
+using System.Data.OleDb;
+using System.Linq;
+using System.Threading.Tasks;
+using Microsoft.EntityFrameworkCore;
+using Microsoft.VisualStudio.TestTools.UnitTesting;
+using Sharp.Data;
+using Sharp.Data.Access.Extensions;
+using Sharp.Data.Context;
+
+namespace Data.Access.Test;
+
+/// <summary>
+/// 使用真实 Access 数据库的集成测试
+/// </summary>
+[TestClass]
+public class RealDatabaseTests
+{
+    private const string DatabaseFile = "dbDwDmsSetup.accdb";
+
+    [TestMethod]
+    public void CanReadDatabaseSchema()
+    {
+        // 读取数据库表结构
+        var connectionString = $"Provider=Microsoft.ACE.OLEDB.12.0;Data Source={DatabaseFile}";
+
+        using var connection = new OleDbConnection(connectionString);
+        connection.Open();
+
+        // 获取所有表
+        var tables = connection.GetSchema("Tables");
+
+        Assert.IsTrue(tables.Rows.Count > 0, "数据库应该包含表");
+
+        Console.WriteLine($"数据库包含 {tables.Rows.Count} 个对象:");
+        foreach (System.Data.DataRow row in tables.Rows)
+        {
+            var tableName = row["TABLE_NAME"]?.ToString();
+            var tableType = row["TABLE_TYPE"]?.ToString();
+            if (tableType == "TABLE")
+            {
+                Console.WriteLine($"  - {tableName}");
+            }
+        }
+    }
+
+    [TestMethod]
+    public void CanListAllTables()
+    {
+        var connectionString = $"Provider=Microsoft.ACE.OLEDB.12.0;Data Source={DatabaseFile}";
+
+        using var connection = new OleDbConnection(connectionString);
+        connection.Open();
+
+        var restrictions = new string?[4];
+        restrictions[3] = "TABLE"; // 只获取表，不包括视图和系统表
+
+        var tables = connection.GetSchema("Tables", restrictions);
+
+        Console.WriteLine("\n=== 用户表列表 ===");
+        foreach (System.Data.DataRow row in tables.Rows)
+        {
+            var tableName = row["TABLE_NAME"]?.ToString();
+            if (!string.IsNullOrEmpty(tableName) && !tableName.StartsWith("MSys"))
+            {
+                Console.WriteLine($"表名: {tableName}");
+
+                // 获取表的列信息
+                var columnRestrictions = new string?[4];
+                columnRestrictions[2] = tableName;
+                var columns = connection.GetSchema("Columns", columnRestrictions);
+
+                Console.WriteLine($"  列数: {columns.Rows.Count}");
+                foreach (System.Data.DataRow colRow in columns.Rows)
+                {
+                    var columnName = colRow["COLUMN_NAME"]?.ToString();
+                    var dataType = colRow["DATA_TYPE"]?.ToString();
+                    Console.WriteLine($"    - {columnName} ({GetDataTypeName(dataType)})");
+                }
+                Console.WriteLine();
+            }
+        }
+    }
+
+    [TestMethod]
+    public async Task CanQueryDatabaseUsingDataContextBuilder()
+    {
+        var builder = new DataContextBuilder<TestDbContext>();
+        builder.UseAccessDatabase(options =>
+        {
+            options.DatabaseFile = DatabaseFile;
+            options.CopyTemplateWhenMissing = false;
+            options.ThrowIfMissing = true;
+        });
+
+        var dataContext = builder.Build();
+
+        // 尝试连接数据库
+        var dbContext = dataContext.Context;
+        var canConnect = await dbContext.Database.CanConnectAsync();
+
+        Assert.IsTrue(canConnect, "应该能够连接到数据库");
+
+        Console.WriteLine("成功使用 DataContextBuilder 连接到 Access 数据库!");
+    }
+
+    private static string GetDataTypeName(string? dataType)
+    {
+        return dataType switch
+        {
+            "130" => "nvarchar",
+            "3" => "int",
+            "7" => "datetime",
+            "11" => "bit",
+            "5" => "double",
+            "4" => "float",
+            "2" => "smallint",
+            "6" => "currency",
+            "128" => "binary",
+            "205" => "image",
+            _ => $"unknown({dataType})"
+        };
+    }
+}
+
+/// <summary>
+/// 测试用的 DbContext
+/// </summary>
+public class TestDbContext : DbContext
+{
+    public TestDbContext(DbContextOptions<TestDbContext> options) : base(options)
+    {
+    }
+}